Maintaining Crystal Clear Pools: The Crucial Role of Silica Sand

For any owner of a private pool, keeping the water clean and crystal clear is not only a matter of aesthetics but also of health. Pool purifiers play a fundamental role in this process, and the type of filter media used, especially silica sand and gravel, is essential to achieve effective filtration. In this article, we will explore how pool purifiers work, the role of silica sand, how and when to change it, and why it is crucial to follow the manufacturer's recommendations.

How Does a Pool Treatment Plant Work?

A pool purifier uses a filtration system that often includes a sand filter. This system pumps pool water through the filter containing silica sand, which acts as the primary filter agent. As water passes through the sand, particles and debris become trapped between the sand grains, allowing only clean water to return to the pool.

The Function of Silica Sand in Treatment Plants

Silica sand is the preferred choice for pool filters due to its uniform size and ability to trap impurities. This sand is not the regular sand you would find at the beach; It is specially processed to have sharp edges and a consistent grain size, ideal for capturing particles as small as 20 microns.

Changing the Sand in the Filter

Over time, the sand in your pool filter will become dirty and less effective. This occurs because the spaces between the sand grains fill with debris, reducing the efficiency of the filter. Changing the sand is a process that involves:

  1. Stop the filtration system and drain the filter.
  2. Open the filter to remove the old sand.
  3. Clean the inside of the filter before adding new sand.
  4. Fill the filter with new silica sand, making sure not to exceed the recommended capacity of the filter.

How often should pool sand be changed?

The frequency with which you should change the sand depends on the use and size of your pool, as well as the load of bathers. However, a general rule of thumb is to change the litter every 3-5 years. However, it is important to consult the manufacturer's manual for specific recommendations.

Importance of Changing the Sand for Filters as Recommended by the Manufacturer

Following the manufacturer's recommendations for changing sand not only ensures that the filtration system operates at maximum efficiency, but also protects the equipment from long-term damage and maintains pool water quality. Using the correct sand and silica gravel and changing them when necessary can prevent problems such as cloudy water and algae formation.

Conclusion

Maintaining a clean and healthy pool requires regular attention and maintenance of the filtration system. Choosing the right silica sand, maintaining the filtration system, and changing the sand at recommended intervals are essential steps to enjoying a pristine pool. At Vetonek.com, we offer the best selection of silica sand and gravel that ensure optimal filtration for your private pool. Visit us to find everything you need to keep your pool in the best possible condition.

Back to blog