Skip to product information
  • Accesorio de bidé para inodoro 1 chorro agua caliente y fría vidaXL
  • Accesorio de bidé para inodoro 1 chorro agua caliente y fría vidaXL
  • Accesorio de bidé para inodoro 1 chorro agua caliente y fría vidaXL
  • Accesorio de bidé para inodoro 1 chorro agua caliente y fría vidaXL
  • Accesorio de bidé para inodoro 1 chorro agua caliente y fría vidaXL

Bidé accessory for toilet 1 hot and cold water stream

41,99 €
41,99 €
Tax included. Shipping calculated at checkout.

Description

This spray bide accessory with brass adapters is designed for optimal cleaning with hot or cold water after using the toilet. Water pressure and temperature can be regulated as one prefers. This Bidé Rociaro for toilet accessory improves personal hygiene and helps prevent hemorrhoids. In addition, it reduces the consumption of toilet paper. The best thing about this sprinkler accessory for the toilet is that it works without electricity and is easy to install. It has a single self -limpable stream whose pressure and temperature can be regulated. The delivery also includes a PU hose, two brass adapters, a teflon tape for plumbing and an instruction manual.

  • Color: White
  • Material: Plastic and brass
  • Water temperature control
  • Water pressure control
  • With a single self -limpable stream
  • It works without electricity
  • Easy to install: "Connect and ready"
  • For use with cold or hot water
  • Delivery includes:
  • 1 x Bidé Rociar accessory for toilet
  • 1 x 250 cm Pu White hose
  • 2 x brass adapters
  • 1 Teflon tape for plumbing
  • 1 x manual

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.