Skip to product information
  • Vetonek Abrigo para perro con arnés impermeable reflectante 3XL rojo

Dog coat with reflective 3xl waterproof harness

30,61 €
30,61 € 34,45 €
You save 11% (3,84 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Keep your dog warm on cold days with this cozy coat for dogs with built -in harness. Waterproof and comfortable: This dog coat for dogs has an impermeable outer layer to keep your pet dry, a soft polar lining to shelter and additional padded for comfort. It is perfect for outdoor adventures in any climate. Adjustable snaps: This dog's walk coat has adjustable straps for a perfect adjustment, providing maximum comfort. Safety reflective spa: equipped with reflective strips, this dog vest improves the Visibility in low light conditions, guaranteeing your safety and that of your dog during the night walks. As zipper design: the design of the zipper allows you to put it on and remove it easily, which simplifies the equipment process of your pet and saves time to the exit. Anilla in D: The resistant rings in D are perfect to safely hold a strap, providing additional security and making it an ideal option for walks.

  • Red
  • Material: Polyester, fleece
  • Size: 3xl
  • Chest circumference: 64 cm
  • Neck circumference: 46 cm
  • Back length: 44 cm
  • Adequate dog weight: 8-12 kg
  • Adjustable harness
  • Waterproof
  • Reflective pull
  • Zipper design

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.