Skip to product information

Active anti mold protection

13,90 €
13,90 €
Tax included. Shipping calculated at checkout.
Container

Description

Nomold Defense row active protection against mold: prevents and eliminates the mold in a lasting way

What is it for?

Nomold Defense row is an aqueous protector designed to prevent mold formation in pavements, coatings and joints. This product avoids the blackening caused by moisture in inner walls, being ideal as an anti-moho preventive treatment before painting.

Advantages

  • Deep penetration: Acts inside the material without forming a superficial film, guaranteeing effective protection.
  • Aqueous Base Protection: An ecological solution that offers security and effectiveness.
  • Invisible: Do not alter the appearance of the treated surface, maintaining its original appearance.
  • Ideal for together: It provides lasting anti-moho protection in the joints, a particularly vulnerable area.
  • Easy application: Specially designed for coatings, with a simple and uniform application.
  • Prolonged action: It offers long -term protection against the reappearance of the mold.

Ideal for

  • Natural stone
  • Ceramics
  • Painted walls
  • Cement and joints
  • Mud

Mode of employment

Nomold Defense row comes ready to use, without diluting.

Application:

  1. Make sure the surface is perfectly clean and dry before applying Nomold Defense.
  2. If there is an present mold, eliminate it with Nomold Quitamoho active and then spray Nomold Defense.
  3. Spray the product evenly keeping the container vertical at a distance of 15-20 cm from the surface.
  4. On little absorbent surfaces, avoid the runoff of the product using a clean and dry cloth to remove the excess.

Attention:
Do not spray on plants. In case of contact, wash immediately with water. Use biocides safely; Always read the label and product information before using it.

Performance

With a liter of Nomold Defense row they can be treated between 20 and 40 m², depending on surface absorption. The performance is indicative and may vary according to the specific conditions.

Formats

Available in 500 ml plastic containers with pulverizer, in boxes of 12 units. This format is designed to offer a comfortable and efficient application, maximizing the protection of your surfaces.

With Nomold Defense row, you ensure active and lasting protection against mold. This treatment not only prevents mold formation, but also maintains your clean and safe surfaces, without altering its appearance. Trust in a row to keep your home or mold -free business effectively and sustainably!

How much stone do I need?

How much stone do I need for the floor?

For boulders and gravel:
• ±80kg per m², based on a 5cm layer. *For grain sizes >32mm a thicker layer is necessary. • Consumption per bag: 1000kg = 0.625m³.
• Covering capacity: ±12.5m² with a layer of 5 cm.

For pine bark:
• ±70L per m², based on a 5cm layer.
• Consumption per bag: 1000L = ±1m³ = ±600kg
• Covering capacity: ±14m² with a layer of 5 cm.

For volcanic, slate and chamotte:
• ±50kg per m², based on a 5cm layer.
• Consumption per bag: 1000kg = ±1m³
• Covering capacity: ±20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ±1,650kg per 1m³.

The calculation is very easy to understand with an example, if you have a 100x50x30 cm gabion. you have to do the following accounts:
1x0.5x0.3= 0.15m³
0.15x1.650= 247.50kg. of stone.
*It is always good to calculate an extra 5%, since when the gabions are filled they widen a little and there is always a little more stone included than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sieve sizes

The actual sizes may vary slightly, since when we talk about a 60-80mm stone, for example, it means that the stones pass through a 80x80mm square mesh. and they do not pass through a 60x60mm one.
A 100mm stone can pass through that 80x80 mesh. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

stone breaking

On the other hand, in stones larger than 60mm. There is a percentage of up to 10% of stones that can break during classification, washing, loading and unloading. Today we do not have machinery that prevents these breakages.

In the photos you can see, you only see real products, no broken parts have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transportation. This is not a problem when using it; The stone will wash itself over time or you can pour water on it before using it.