Skip to product information

Renew and protect marble countertops

13,90 €
13,90 €
Tax included. Shipping calculated at checkout.
Container

Description

Marble refresh row clean and renew marble countertops: lasting protection and professional cleaning

What is it for?

Marble Refresh row is designed to clean and renew natural stone surfaces that have already been treated with waterproofing. This product maintains and reinforces the protection of antimancha over time, being perfect for marble countertops, quartz and granite. It is also ideal for previously waterproofing ceramic countertops and adequate for marble and quartz resin surfaces.

Advantages

  • Biodegradable ingredients: Environmental respectful, perfect for daily use.
  • Protective treatment reinforcement: Clean and keep the surfaces, improving its spots resistance.
  • Neutral product: Ideal even for the most delicate natural stone surfaces.
  • Easy to use: It does not require rinse and dries quickly, facilitating its use.
  • Pleasant fragrance: Leave a feeling of freshness and cleaning on treated surfaces.
  • Food insurance: The treated surfaces are suitable for food contact, which makes it perfect for kitchens.
  • A+ certificate: It complies with the French regulation of volatile organic compounds (VOC), guaranteeing safe and healthy use.

Ideal for

  • Marble
  • Granite
  • Natural stone
  • Terrazos: Marble-Resina, Quartz-Resina
  • Marble-cement
  • Quartz

Mode of employment

Marble Refresh row is ready to use, without diluting.

Application:

  1. Rocía Marble refresh directly on the surface you want to clean and protect.
  2. Use a soft and dry cloth to clean and massage the surface until it is completely dry.
  3. It is not necessary to rinse.

With Marble Refresh row, keep your marble countertops and natural stone always in the best conditions. This renovator not only clean, but also reinforces the protection of your surfaces, ensuring prolonged durability and an impeccable finish. Trust in a row for superior cleaning and unmatched protection!

How much stone do I need?

How much stone do I need for the floor?

For boulders and gravel:
• ±80kg per m², based on a 5cm layer. *For grain sizes >32mm a thicker layer is necessary. • Consumption per bag: 1000kg = 0.625m³.
• Covering capacity: ±12.5m² with a layer of 5 cm.

For pine bark:
• ±70L per m², based on a 5cm layer.
• Consumption per bag: 1000L = ±1m³ = ±600kg
• Covering capacity: ±14m² with a layer of 5 cm.

For volcanic, slate and chamotte:
• ±50kg per m², based on a 5cm layer.
• Consumption per bag: 1000kg = ±1m³
• Covering capacity: ±20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ±1,650kg per 1m³.

The calculation is very easy to understand with an example, if you have a 100x50x30 cm gabion. you have to do the following accounts:
1x0.5x0.3= 0.15m³
0.15x1.650= 247.50kg. of stone.
*It is always good to calculate an extra 5%, since when the gabions are filled they widen a little and there is always a little more stone included than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sieve sizes

The actual sizes may vary slightly, since when we talk about a 60-80mm stone, for example, it means that the stones pass through a 80x80mm square mesh. and they do not pass through a 60x60mm one.
A 100mm stone can pass through that 80x80 mesh. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

stone breaking

On the other hand, in stones larger than 60mm. There is a percentage of up to 10% of stones that can break during classification, washing, loading and unloading. Today we do not have machinery that prevents these breakages.

In the photos you can see, you only see real products, no broken parts have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transportation. This is not a problem when using it; The stone will wash itself over time or you can pour water on it before using it.