Skip to product information
  • Vetonek Cojín banco jardín tela Oxford a rayas azul y blanco 150x50x7cm

Cushion Garden Bank Oxford Wowbugs with blue and white stripes 150x50x7cm

46,45 €
46,45 € 52,28 €
You save 11% (5,83 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Give a new air to your outdoor space with this comfortable cushion for garden bank in an instant! Durable material: Oxford fabric is light, water resistant and also damage and dirt. The thread used for the fabric makes the cloth lasting and breathable. It is also naturally resistant to wrinkles. Soft filling: The outdoor cushion is stuffed with hollow fiber for an optimal and ultra soft seat comfort. The cushion recovers its original form after each use. Various uses: The cushion is not only suitable for outdoor use, such as garden and patio furniture, but can also be used indoors such as family bank and pad cushion to sit in the living room. In addition, it is a beautiful ornament that gives a new appearance to the house. Non -slip design: The strings facilitate placing the cushion in the furniture so that they do not move from their site. Useful information: The product is packaged in the void, so it requires time to expand and recover its original form.

  • Material: Oxford fabric (100% polyester)
  • Fill material: hollow fiber
  • Dimensions: 150 x 50 x 7 cm (length x width x thickness)
  • Rope length (each): 30 cm
  • Blue and white stripes
  • With 2 rope games
  • Repel the water

How much stone do I need?

How much stone do I need for the floor?

For boulders and gravel:
• ±80kg per m², based on a 5cm layer. *For grain sizes >32mm a thicker layer is necessary. • Consumption per bag: 1000kg = 0.625m³.
• Covering capacity: ±12.5m² with a layer of 5 cm.

For pine bark:
• ±70L per m², based on a 5cm layer.
• Consumption per bag: 1000L = ±1m³ = ±600kg
• Covering capacity: ±14m² with a layer of 5 cm.

For volcanic, slate and chamotte:
• ±50kg per m², based on a 5cm layer.
• Consumption per bag: 1000kg = ±1m³
• Covering capacity: ±20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ±1,650kg per 1m³.

The calculation is very easy to understand with an example, if you have a 100x50x30 cm gabion. you have to do the following accounts:
1x0.5x0.3= 0.15m³
0.15x1.650= 247.50kg. of stone.
*It is always good to calculate an extra 5%, since when the gabions are filled they widen a little and there is always a little more stone included than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sieve sizes

The actual sizes may vary slightly, since when we talk about a 60-80mm stone, for example, it means that the stones pass through a 80x80mm square mesh. and they do not pass through a 60x60mm one.
A 100mm stone can pass through that 80x80 mesh. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

stone breaking

On the other hand, in stones larger than 60mm. There is a percentage of up to 10% of stones that can break during classification, washing, loading and unloading. Today we do not have machinery that prevents these breakages.

In the photos you can see, you only see real products, no broken parts have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transportation. This is not a problem when using it; The stone will wash itself over time or you can pour water on it before using it.