Skip to product information
  • Vetonek Silla de jardín Adirondack con reposapiés y mesa HDPE blanco

Adirondack garden chair with headpiece and white HDPE table

216,74 €
216,74 € 243,93 €
You save 11% (27,19 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This adirondack chair with restraint and table is a practical and elegant contribution for your garden, patio or terrace. First quality material: the patio chair with restraint and table is made with HDPE (high density polyethylene), weather resistant and UV rays. This material improves the defects of solid wood, which is easily broken and cracked, especially on rainy days. Low maintenance surface: the exterior furniture game does not require paint, coloration, waterproofing or similar maintenance. You just need to wash with soap, water and a soft bristle brush. With minimal care, to this furniture set will last years. DESIGN COMFORTED: Equipped with wide arms and high back, this exterior chair offers you optimal comfort. The restraint is removable and can provide additional support for the feet. Practice Table: The Adirondack table allows you to place the phone, sunglasses, drinks and other small objects. Note: To prolong the life of your outdoor furniture, we recommend that you protect them with a waterproof case.

  • Color: White
  • Material: HDPE (high density polyethylene), steel
  • Table dimensions: 38 x 38 x 46 cm (wide x high x high)
  • Total dimensions: 73 x 83 x 92 cm (wide x high x high)
  • Seat width: 50 cm
  • Seat depth: 47 cm
  • Backup length: 77 cm
  • Height of the floor from the ground: 52.5 cm
  • Dimensions of the support: 45 x 44 x 36 cm (width x high x high)
  • Long duration
  • Low maintenance
  • It can detach from water easily
  • You can handle different types of weather conditions better than most types of wood
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x Adirondack garden table
  • 1 x adirondack garden chair
  • 1 x rest
Maximum 110 kg per seat.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.