Skip to product information

Wooden Gardener 35x35cm. 35 liters

69,90 €
69,90 €
Tax included. Shipping calculated at checkout.

Description

Transform your exteriors into an oasis of tranquility and style with the exclusive planters from Vetonek.com. Made of resistant Nordic pine wood, these pieces are ideal for decorating terraces, balconies, and more, without requiring varnish for maintenance. Its unique design not only enhances the beauty of your spaces, but also invites the creation of environments full of life and nature. At Vetonek.com, we know that the success of your plants begins with the right substrate . Therefore, we invite you to explore our special selection of substrates, designed to promote healthy and vigorous growth of your plantations. Discover the perfect combination of elegance, durability and plant care by visiting our substrates section. Give your outdoor spaces the green and sophisticated touch they deserve with our planters, and enjoy the lasting beauty that only nature can offer.

Square planter assembled and ready to use. It is perfect for decorating terraces, balconies, porches, attics or any place where you want to create an elegant and natural atmosphere. Fabracada Made of high-quality Nordic pine wood, suitable for outdoor use without the need for varnish.

  • Capacity:
    • 35 L
  • Measures:
    • 35x35x40 cm.
  • This product is delivered assembled.
  • Includes geotextile fabric for proper water drainage.
  • Made of slow-growing Nordic pine.
  • Autoclave treatment level 4. Suitable for outdoor use.
  • Weight:
    • 7 kg.

How much stone do I need?

How much stone do I need for the floor?

For boulders and gravel:
• ±80kg per m², based on a 5cm layer. *For grain sizes >32mm a thicker layer is necessary. • Consumption per bag: 1000kg = 0.625m³.
• Covering capacity: ±12.5m² with a layer of 5 cm.

For pine bark:
• ±70L per m², based on a 5cm layer.
• Consumption per bag: 1000L = ±1m³ = ±600kg
• Covering capacity: ±14m² with a layer of 5 cm.

For volcanic, slate and chamotte:
• ±50kg per m², based on a 5cm layer.
• Consumption per bag: 1000kg = ±1m³
• Covering capacity: ±20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ±1,650kg per 1m³.

The calculation is very easy to understand with an example, if you have a 100x50x30 cm gabion. you have to do the following accounts:
1x0.5x0.3= 0.15m³
0.15x1.650= 247.50kg. of stone.
*It is always good to calculate an extra 5%, since when the gabions are filled they widen a little and there is always a little more stone included than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sieve sizes

The actual sizes may vary slightly, since when we talk about a 60-80mm stone, for example, it means that the stones pass through a 80x80mm square mesh. and they do not pass through a 60x60mm one.
A 100mm stone can pass through that 80x80 mesh. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

stone breaking

On the other hand, in stones larger than 60mm. There is a percentage of up to 10% of stones that can break during classification, washing, loading and unloading. Today we do not have machinery that prevents these breakages.

In the photos you can see, you only see real products, no broken parts have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transportation. This is not a problem when using it; The stone will wash itself over time or you can pour water on it before using it.