Skip to product information
  • Dolomita granulada comprar online fabricante y cantera
  • Cal viva dolomita granulada agricultura enmienda
  • Dolomita granulada para el campo comprar
  • Chaux calcinee granule 3-8 mm. Cal viva de dolomita calcinada

Quicklime Dolomite Granules | Calcium and Magnesium Booster

309,00 €
309,00 €
Tax included. Shipping calculated at checkout.
Container
Size
Color

Description
  • Form: Granulated
  • Particle size: 3-8 mm
  • Composition:
    • Calcium oxide (CaO): 55% in oxide state.
    • Magnesium oxide (MgO): 35% in oxide state.
    • Oligo-elements: Copper, zinc, among others.
  • Advice for use: An application of 0.6 to 0.8 tons per hectare is recommended, depending on the specific needs of the soil.
  • Advantages:
    • Rapid action on the pH of acidic soils, balancing it towards a neutral pH close to 7.
    • It provides a significant amount of calcium that acts effectively in raising the pH of the soil.
    • Magnesium is essential for the synthesis of chlorophyll and participates in various synthetic functions of the plant, avoiding loss of yield due to antagonism between potash and magnesium.
    • It contributes to obtaining a mature soil rich in humus.
  • Recommendations:
    • It is vital not to exceed the indicated dose to avoid an imbalance in the soil.
    • Perform a soil analysis prior to application to determine specific needs.
  • Container: 600 kg Big Bag.
  • Neutralizing Value: 102

Granulated Dolomite Quicklime is an excellent amendment for those soils that require a quick correction of their acidity and a supply of magnesium. By providing both calcium and magnesium, this product is a comprehensive solution for improving soil health and fertility. It is essential to always follow the recommended indications and dosages to obtain the best results.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.