Remove active mold

12,90 €
12,90 €
Tax included. Shipping calculated at checkout.
Container

Description

Nomold Quitamoho Active Row: Eliminates and protects against mold forever

What is it for?

Active Nomold Quitamoho is designed to quickly remove the mold from a wide variety of surfaces, including painted walls, natural and artificial stone, cement, mud, joints, ceramics and glass. This product sains the affected surfaces, restoring its original status and preventing future mold problems.

Advantages

  • Easy application: It comes in a practical spray container that facilitates its use in any situation.
  • Ideal viscosity: Formulated for an effective application on vertical surfaces, such as walls.
  • Fast action: Act in a few minutes, eliminating the mold efficiently.
  • Versatile: Effective even in the removal of mold in the joints, an area difficult to treat.

Ideal for

  • Porcelain sets
  • Ceramics
  • Mud
  • Painted walls
  • Cement and joints
  • Mud and face view
  • Extruded sets

Mode of employment

Nomold Quitamoho Active row comes ready to use, without diluting.

Application:

  1. Spray directly on the affected surface, maintaining the container vertical at a distance of 15-20 cm of the area to be treated.
  2. Leave act for about 15 minutes.
  3. Eliminate excess product with a humid cloth to avoid runoff.
  4. Repeat the operation if necessary and clarify with a wet sponge.
  5. To prevent mold reappearance, it is recommended to use Nomold Defense as posterior active protection.

Ventilation: Ventila the rooms during and after use (at least 4 hours of ventilation, or more if chlorine smell). Before painting, wait about 12 hours to ensure safe application.

Precautions:
Do not spray on plants, fabrics or metals. In case of accidental contact, wash immediately with water. Do not use polished stones as marble. For colored paintings, try first in a small area to check possible color alterations. Always use biocides safely and follow the instructions on the label. It is recommended to wear gloves and protective clothing, as well as a respiratory mask in areas with little ventilation.

Performance

With a liter of product they can be treated between 10 and 20 m², depending on surface absorption. The performance is indicative and may vary according to the conditions of use.

Formats

Available in 500 ml plastic containers with pulverizer, in boxes of 12 units. This format is designed to offer a comfortable and precise application, ensuring effective results in each use.


With Active Nomold Quitamoho, it eliminates the mold quickly and definitively, restoring and protecting your surfaces easily. Combine it with Nomold Defense for complete and lasting protection. Trust in a row to keep your home free of mold!

How much stone do I need?

How much stone do I need for the floor?

For boulders and gravel:
• ±80kg per m², based on a 5cm layer. *For grain sizes >32mm a thicker layer is necessary. • Consumption per bag: 1000kg = 0.625m³.
• Covering capacity: ±12.5m² with a layer of 5 cm.

For pine bark:
• ±70L per m², based on a 5cm layer.
• Consumption per bag: 1000L = ±1m³ = ±600kg
• Covering capacity: ±14m² with a layer of 5 cm.

For volcanic, slate and chamotte:
• ±50kg per m², based on a 5cm layer.
• Consumption per bag: 1000kg = ±1m³
• Covering capacity: ±20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ±1,650kg per 1m³.

The calculation is very easy to understand with an example, if you have a 100x50x30 cm gabion. you have to do the following accounts:
1x0.5x0.3= 0.15m³
0.15x1.650= 247.50kg. of stone.
*It is always good to calculate an extra 5%, since when the gabions are filled they widen a little and there is always a little more stone included than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sieve sizes

The actual sizes may vary slightly, since when we talk about a 60-80mm stone, for example, it means that the stones pass through a 80x80mm square mesh. and they do not pass through a 60x60mm one.
A 100mm stone can pass through that 80x80 mesh. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

stone breaking

On the other hand, in stones larger than 60mm. There is a percentage of up to 10% of stones that can break during classification, washing, loading and unloading. Today we do not have machinery that prevents these breakages.

In the photos you can see, you only see real products, no broken parts have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transportation. This is not a problem when using it; The stone will wash itself over time or you can pour water on it before using it.