Self-leveling mortar Vetonek

655,00 €
655,00 € 14,60 €
Tax included. Shipping calculated at checkout.
Container

Description

Easy application mortar to repair and/or prepare soils to place parquet or tile for example.

If you want to change or improve the floor of a room today is cheaper and easier than ever. Thanks to its fluidity, it welcomes very smooth surfaces and with high planimetry, without fissures and with great hardness.

  

Save money | Take advantage of your time | Professional result

The Vetonek self -leveling mortar is used to repair very damaged soils or to improve concrete soils for example, to prepare the ground to place a parquet or any type of tile later. If you have another previous tile, you can fill with the self -leveling mortar and place a parquet or tile, from 5 to 50 mm thick so the height of the room will not rise excessively.

 

Preparation and placement of autoniverse

Of great resistance even with little thickness its preparation and placement is very simple, prior experience is not necessary for what you can do yourself or your trust.

It is a professional product, the result is not going to disappoint you, you just have to follow the indicated steps, the amount of water indicated and mix well.

It is important to clean the old soil, that you do not have wet, or dust and that is not flexible.

Pour in a capable 3.5 liters of clean water for each 25 kg sack, shake and mix to be able to be with low revolution electric blender, if it is not possible it can be done by hand, you have to waste a little more time, With about 5 minutes of kneading it is enough. Do not add in any case more water than the indicated, the mortar will lose properties.

Extend the material with a single layer between 5 and 50 mm with a leveling plain, if we pass a string roller we will help the occluded air out before.

In any case today you only have to look for tutorials, both writings and videos, check yourself that is very easy to apply.

 

Characteristics

For interior use only, it is suitable for soils with radiant heating, pedestrianly tramable at 24 hours and possibility of dressing it at 7 days. 25 kg bags.

 

5% discount if you buy complete pallets of 50 bags of 25 kg.

 

How much self -leveling mortar do I need?

1.9 kg is needed. by m² and mm thick. For example for 20 4 mm thick we will need 152 kg. of self -leveling mortar.

To clean the spots and fresh tools with a little water, it is sufficient, mechanical means are needed.

 

 

How much stone do I need?

How much stone do I need for the floor?

For boulders and gravel:
• ±80kg per m², based on a 5cm layer. *For grain sizes >32mm a thicker layer is necessary. • Consumption per bag: 1000kg = 0.625m³.
• Covering capacity: ±12.5m² with a layer of 5 cm.

For pine bark:
• ±70L per m², based on a 5cm layer.
• Consumption per bag: 1000L = ±1m³ = ±600kg
• Covering capacity: ±14m² with a layer of 5 cm.

For volcanic, slate and chamotte:
• ±50kg per m², based on a 5cm layer.
• Consumption per bag: 1000kg = ±1m³
• Covering capacity: ±20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ±1,650kg per 1m³.

The calculation is very easy to understand with an example, if you have a 100x50x30 cm gabion. you have to do the following accounts:
1x0.5x0.3= 0.15m³
0.15x1.650= 247.50kg. of stone.
*It is always good to calculate an extra 5%, since when the gabions are filled they widen a little and there is always a little more stone included than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sieve sizes

The actual sizes may vary slightly, since when we talk about a 60-80mm stone, for example, it means that the stones pass through a 80x80mm square mesh. and they do not pass through a 60x60mm one.
A 100mm stone can pass through that 80x80 mesh. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

stone breaking

On the other hand, in stones larger than 60mm. There is a percentage of up to 10% of stones that can break during classification, washing, loading and unloading. Today we do not have machinery that prevents these breakages.

In the photos you can see, you only see real products, no broken parts have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transportation. This is not a problem when using it; The stone will wash itself over time or you can pour water on it before using it.