Agricultural Polyester Rope

59,00 €
59,00 €
Tax included. Shipping calculated at checkout.
Size
Color

Description

Mineravi Agricultural Polyester Cable is the perfect ally for your agricultural needs. This polyester thread is a high-strength material with a wide range of applications in the agricultural sector, from the construction of greenhouses to the creation of supports for meshes and fruit structures. This polyester cable, available in 10 kg rolls in various gauges, is the ideal solution to resist mechanical loads and maintain tension without stressing the structures.

Calibers and Meters per Roll:

  • 2.2 mm (1800 meters)
  • 2.6 mm (1400 meters)
  • 3 mm (1000 meters)
  • 4 mm (600 meters)
  • 5 mm (300 meters)
  • 3x3 mm (900 meters)

Product Features:

  • High resistance and controlled elasticity
  • Impact resistence
  • High retraction capacity for permanent tension
  • No maintenance required
  • Resistant to oxidation and phytosanitary products
  • Resistant to UV rays, extreme temperatures and humidity
  • Does not conduct electricity, reducing the risk of accidents
  • Lightweight for easy installation
  • Mechanical resistance of 60 Kgf
  • Resists temperatures from -40ºC to +70ºC
  • Varied diameters for different applications

Applications:

  • Fruit structures
  • Mesh support
  • Headrest attachment
  • Cherry Blossom Roof
  • Greenhouse construction
  • Thermal screens
  • Vineyards and intensive olive groves

With a useful life of more than 30 years, Agricultural Polyester Cable does not rust and is less abrasive with meshes and plastics, which extends its useful life. It can be placed on any post and structure, whether made of wood, cement or iron, and offers resistance without deformation at extreme temperatures. Save time and labor with its permanent tension, without the need to re-tension it.

Mineravi is proud to offer Agricultural Polyester Cable, the perfect solution for your agricultural needs. Trust the strength and durability of this product to keep your structures and crops safe and supported.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.