Skip to product information
  • Vetonek Arco de jardín acero negro Ø180x255 cm

Black steel garden arc Ø180x255 cm

125,33 €
125,33 € 141,05 €
You save 11% (15,72 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This elegant garden arch is the perfect choice for climbing plants and for rosemal. Without a doubt, it will be a point of attraction in any garden, patio or terrace. Stable material: steel is a very hard and strong material. It offers solidity and stability. The powder coating on steel creates a protective layer against use and wear. Multiple uses: You can plant your favorite climbing plants in the garden pergola according to the different stations. You can even decorate yourself the arc of roses with tulle, balloons and lights. Robust structure: the resistant steel structure with powder coating from the garden cenor is strong enough to withstand many living climbing plants. From the garden lattice arc is a perfect complement as entrance, step or to decorate the path of the garden. Useful information: To facilitate assembly, each product is delivered with a manual.

  • Color: black
  • Material: Powder coating steel
  • Dimensions: 180 x 255 cm (High diameter)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.