Skip to product information

Concentrated neutral detergent

11,50 €
11,50 €
Tax included. Shipping calculated at checkout.
Container
Color

Description

Eliminates spots of all types of pavements respecting the treated surfaces, ideal for delicate pavements of natural stone such as marble, ceramics or mud, it is also very effective with sensitive surfaces to strong detergents such as wood and laminates and the maintenance of all surfaces waned.

Very concentrated, it can be used in several dilutions, From 1:30 to 1: 200 according to the needs.

Advantages

  • High performance, high cleaning power and high biodegradability.
  • It does not need clarified and leaves no fences or waste.
  • Thoroughly eliminate the spots that other cleaners do not arrive.
  • It is very effective for cleaning spots on polished stones such as marble, travertine, agglomerates without damaging them.
  • Perfect on low absorption ceramic surfaces (porcelain stoneware, monochocation with rough surface).

 

Mode of employment

For maintenance any type of pavement:

  1. Shake the container before using.
  2. Dilute a cover in a water cube (25 ml in 5 liters). 
  3. Scrub the pavement normally.
  4. It is not necessary to clarify.

For cleaning of Very dirty pavements:

  1. Shake the container before using.
  2. Dilute in water in 1:30 proportion. 
  3. Wash with a cloth and a brush.
  4. Collect dirt.
  5. Clear with clean water

 

WARNINGS

Do not use in tissue pavements or in wax treated.

 

 

How much stone do I need?

How much stone do I need for the floor?

For boulders and gravel:
• ±80kg per m², based on a 5cm layer. *For grain sizes >32mm a thicker layer is necessary. • Consumption per bag: 1000kg = 0.625m³.
• Covering capacity: ±12.5m² with a layer of 5 cm.

For pine bark:
• ±70L per m², based on a 5cm layer.
• Consumption per bag: 1000L = ±1m³ = ±600kg
• Covering capacity: ±14m² with a layer of 5 cm.

For volcanic, slate and chamotte:
• ±50kg per m², based on a 5cm layer.
• Consumption per bag: 1000kg = ±1m³
• Covering capacity: ±20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ±1,650kg per 1m³.

The calculation is very easy to understand with an example, if you have a 100x50x30 cm gabion. you have to do the following accounts:
1x0.5x0.3= 0.15m³
0.15x1.650= 247.50kg. of stone.
*It is always good to calculate an extra 5%, since when the gabions are filled they widen a little and there is always a little more stone included than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sieve sizes

The actual sizes may vary slightly, since when we talk about a 60-80mm stone, for example, it means that the stones pass through a 80x80mm square mesh. and they do not pass through a 60x60mm one.
A 100mm stone can pass through that 80x80 mesh. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

stone breaking

On the other hand, in stones larger than 60mm. There is a percentage of up to 10% of stones that can break during classification, washing, loading and unloading. Today we do not have machinery that prevents these breakages.

In the photos you can see, you only see real products, no broken parts have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transportation. This is not a problem when using it; The stone will wash itself over time or you can pour water on it before using it.