Skip to product information
  • EISL Conjunto de ducha EASY ENERGY cromado

EISL Easy Energy Shower set chrome

87,18 €
87,18 € 98,12 €
You save 11% (10,94 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

The Easy Energy shower set of EISL transforms the shower into a small spa. Nice and simple design: The shower set is made of metal with a chrome finish. Thanks to the antical nozzles of the fixed shower and the hand artichoke, ending the lime is very simple. Easy use to use: You can change your fixed shower with artichoke with the switch. Hand artichoke also has a flexo of 1.5 meters, so it is perfect to shower. Practical shower system: If you are looking for a shower with an adequate chromed finish for bathrooms with instant water heaters, this shower set is the perfect choice.

  • Color: Chromed
  • Material: Coated brass
  • Dimensions: 42.5 x 17.6 x 103 cm (length x width x high)
  • Fixed shower dimensions: 17.5 x 17.5 cm (long x width)
  • Hand artichoke dimensions: 6.3 x 23 cm (long x width)
  • Shower bar height: 102 cm
  • With antical nozzles
  • Wall supports adjustable in height
  • Metallic shower flexo length: approx. 150 cm
  • Metallic connection flexo length: approx. 80 cm
  • Chrome stainless steel shower bar, with shine
  • Easily change between fixed shower and hand artichoke
  • Water surface extension: approx. 425 mm (without wall support)
  • Easy to ride
  • The delivery contains:
  • 1 x switch (Change your fixed shower to artichoke)
  • 1 x Water savings board (save up to 50%)
  • 1 x 150 cm shower flex
  • 1 x Flexo of connection to the tap of 80 cm double winding with standard 1/2 "(tap not included)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.