Skip to product information
  • EISL Conjunto de ducha STILOVAL cromado

EISL Shower set chrome

110,06 €
110,06 € 123,87 €
You save 11% (13,81 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Enjoy an extraordinary shower! EISL's Stilval shower chromed set transforms the shower into a small spa. Nice and simple design: The shower set is made of brass coated with a chrome finish. It has a great fixed sprayer and a modern hand artichoke, both with antical nozzles. Easy use to use: You can change your fixed shower with artichoke with the switch. The hand artichoke also has a 1.5 -meter flexo, so it is perfect for showering. Practice shower system: if you are looking The perfect choice. Easy to assemble: The assembly kit included, with all the necessary accessories, facilitates the installation of this shower. You will not worry about whether the holes you have serves or not, you can use them again!

  • Color: Chromed
  • Material: Coated brass
  • Dimensions: 38 x 24 x 101 cm (length x width x high)
  • Fixed shower diameter: 24 cm
  • Hand artichoke dimensions: 4 x 24 cm (length x wide)
  • Shower bar height: 101 cm
  • With antical nozzles
  • Wall supports adjustable in height
  • Metallic shower flexo length: approx. 150 cm
  • Metallic connection flexo length: approx. 80 cm
  • Easily change between fixed shower and hand artichoke
  • Chrome stainless steel shower bar, with shine
  • Water surface extension: approx. 380 mm (no wall support)
  • Easy to ride
    • Delivery contains:
  • 1 x switch (Change your fixed shower to artichoke)
  • 1 x Water savings board (save up to 50%)
  • 1 x 150 cm shower flex
  • 1 x Flexo of connection to the 80 cm tap (tap not included)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.