Skip to product information
  • Vetonek Set de muebles de bar de jardín 3 pzas y cojines ratán PE gris

Garden bar furniture set 3 pcs and cushions ratán pe gray

252,66 €
252,66 € 284,36 €
You save 11% (31,70 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This elegant bar game in the garden gives you a pleasant and comfortable moment with your family and friends. With a steel structure with powder coating covered with PE ratán, this high bar table has guaranteed years of use abroad. In addition, the surface and the solid acacia wood base add greater robustness and stability. The stools have a strong construction of steel structure and are made of rattan pe -resistant, which guarantees stability and are easy to move. The cushion and rest also add additional comfort to the chair seat. Note: To prolong the useful life of outdoor furniture, we recommend that you clean them regularly and do not leave them outdoors unnecessarily. Cleaning: Use a soft soap solution Sharement: If possible, keep the product in a place fresh and dry inside. If the product is stored outdoors, protégelo with a waterproof case. Clean and dry the excess water or snow of flat surfaces after a rain or snowfall. Allows ventilation to avoid moisture -related damage.

  • Table:
  • Gray
  • Material: Ratán Pe, steel with powder coating, solid acacia wood with an oil finish
  • Dimensions: 60 x 60 x 110 cm (length x width x high)
  • Surface thickness: 2 cm
  • Stools:
  • Gray
  • Cushion color: anthracite gray
  • Material: Ratán Pe, Steel
  • Cushion material: fabric (100% polyester)
  • Dimensions: 38 x 38 x 76 cm (wide x high x high)
  • Cushion dimensions: 38 x 38 x 3 (length x width x thickness)
  • Requires assembly: Yes
  • Delivery includes:
  • 1 x table
  • 2 x stools
  • 2 x seat cushions
Maximum 110 kg per seat. Take into account the risk of open fire and other sources of intense heat in the vicinity of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.