Skip to product information
  • Vetonek Sillas de jardín 2 uds con cojines azul real madera de teca

Garden Chairs 2 UDS WITH BLUE BLUE COJINES TELA WOOD

160,22 €
160,22 € 180,33 €
You save 11% (20,11 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These wooden folding garden chairs, with a simple but elegant design, are designed to provide a comfortable seat experience. Built with very durable teak wood, these teak furniture have been dried in the oven and finely sanded to give them a very smooth appearance. Teak wood is known for its exceptional robustness and weather resistance, which makes it much more suitable for garden furniture than any other type of wood. Teak wood is the perfect choice if you want to buy a lasting garden furniture. The sanded surface is easy to clean with a damp cloth. These garden dining chairs are also light, which makes them completely flexible and easy to move. Exterior chairs can be easily folded when they are not in use. In addition, the including seat cushions also provide greater comfort when sitting.

  • Cushion color: real blue
  • Material: Teak hard wood with fine sanding and aqueous base finish
  • Cushion material: 100% polyester
  • Dimensions: 47 x 60 x 89 cm (wide x high x high)
  • Seat depth: 37 cm
  • Seat height from the floor: 46 cm
  • Cushion dimensions: 40 x 40 x 3 cm (length x width x thickness)
  • Delivery includes:
  • 2 x garden chairs
  • 2 x seat cushions
Maximum 110 kg per seat.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.