Skip to product information
  • Vetonek Sillas de jardín 2 unidades ratán sintético marrón

Garden chairs 2 units Brown synthetic

148,19 €
148,19 € 166,79 €
You save 11% (18,60 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This set of Ratán chairs will be a great contribution to your garden, patio or terrace. Its simple design will contribute a modern touch to its patio or garden. The firmly woven Ratán structure produces a smooth and bright finish, which makes these chairs not only attractive, but also comfortable. Thanks to the steel structure and aluminum legs, the chairs are robust, stable and durable. As is outpatient and waterproof, Ratán PE's chair set is very easy to clean. Thick, removable cushions add comfort to the seat. Delivery includes 2 chairs and 2 cushions. Note: We recommend that you cover the furniture in conditions of rain, snow and frost.

  • Ratán color: brown
  • Cushion color: cream white
  • Material: Ratán pe + steel structure + aluminum legs
  • Dimensions: 58 x 61 x 88 cm (wide x high x high)
  • Seat width: 47 cm
  • Seat depth: 43 cm
  • Seat height from the ground: 42 cm
  • Height of the floor from the ground: 65 cm
  • Cushion material: 100% polyester
  • Removable and washable cushion covers
  • Delivery includes 2 chairs and 2 cushions
Maximum 110 kg per seat. Take into account the risk of open fire and other sources of intense heat in the vicinity of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.