Skip to product information
  • Vetonek Sillas de jardín 8 uds madera maciza de teca cojines gris

Garden chairs 8 UDS Macker Wood Teak Gray cushions

1.365,52 €
1.365,52 € 1.536,87 €
You save 11% (171,35 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With a rustic and practical design, this set of garden wood chairs will make your outdoor space level up! Built with very durable teak wood, these teak furniture have been dried in the oven and finely sanded to give them a very smooth appearance. Teak wood is known for its exceptional robustness and weather resistance, which makes it much more suitable for garden furniture than any other type of wood. Teak wood is the perfect choice if you want to buy a lasting garden furniture. These garden chairs have a refined appearance that integrates instantly into any garden or patio decoration. The set is also the ideal option for relaxing moments in the romantic garden of a country house or near an idyllic garden pond. The included cushion is practical and has a decorative function. Note: To prolong the useful life of exterior furniture, we recommend that you clean them regularly and not leave them outdoors unnecessarily. Cleaning: Use a soft soap solution Sharement: If possible, keep the product in a place fresh and dry inside. If the product is stored outdoors, protégelo with a waterproof case. Clean and dry the excess water or snow of flat surfaces after a rain or snowfall. Allows ventilation to avoid moisture -related damage.

  • Cushion color: Gray
  • Material: Teak hard wood with fine sanding and aqueous base finish
  • Cushion material: fabric (100% polyester)
  • Dimensions: 58 x 60 x 90 cm (wide x high x high)
  • Seat width: 58 cm
  • Seat depth: 50 cm
  • Seat height from the floor: 45 cm
  • Height of the floor from the ground: 66.5 cm
  • Cushion dimensions: 50 x 50 x 3 cm (length x width x thickness)
  • Requires assembly: Yes
  • Delivery includes:
  • 8 x garden chairs
  • 8 x cushions
Maximum 110 kg per seat.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.