Skip to product information
  • Vetonek Pérgola de jardín con tejado retráctil gris taupe 3x3m 180 g/m²

Garden pergola with gray roof taupe 3x3m 180 g/m²

353,63 €
353,63 € 398,01 €
You save 11% (44,38 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This versatile pergola will constitute a magnificent and decorative added for your garden or any other outer space, provides shadow against the sun and rain protection. This novel pergola is equipped with a sliding, adjustable and retractable awning, which can be lowered or climbing on both sides thanks to the integrated handles. Thus, you can decide how much light or shadow you want. Made of steel with powder coating, this dinner is very robust and durable. The roof is made of polyester fabric with PA cladding and is resistant to water and weathering. It can also be removed to wash or store it when not used. Delivery also includes land pins. Note: This product should never be used with bad weather, such as strong winds, heavy rains, snow, storms, etc.

  • Roof color: taupe
  • Material: powder coating steel, 100% polyester) with PA coating
  • Dimensions: 300 x 300 x 225 cm (length x width x high)
  • Fabor weight: 180 g/m²
  • Adjustable and retractable sliding awning
  • Earth plugs included
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.