Skip to product information

Tierra Plantas Flervi

1,80 €
1,80 €
Tax included. Shipping calculated at checkout.
Container

Description

Tierra Plantas Flervi

If you have a wide variety of plants, our Flervi multipurpose substrate is a perfect soil to use with all of them, it is a substrate perfectly usable with any type of plant, of course we can buy a substrate for each specific type of plant but obviously we will spend more money and The improvement in results is often not worth it.

Universal or multipurpose substrate, Flervi.

Our universal Flervi substrate is a product with a balanced physical structure between aeration and water retention, and is composed of a formula that offers great results, including Perlite to obtain a higher level of aeration.

Composition Earth plants Flervi

Peat, Coconut, Compost, Perlite, organically certified fertilizer and nitrate of Lime.

Particle size distribution 0-20 mm, pH 6.5

Substrate Containers

Available in 10, 20 and 50 liter bags, approximate weight (depends on humidity), 10 liter bag, 4.5 kg, 20 liter bag, 9 kg, 50 liter bag, 23 kg.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.