Skip to product information
  • @Pet Conejera Queensland blanca y marrón 147x53x85 cm

@Pet Conejera Queensland Blanca and Brown 147x53x85 cm

198,14 €
198,14 € 223,01 €
You save 11% (24,87 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The luxurious Conejera Queensland of @pet is perfect for your rabbits. The house for rabbits, which has a loft, a corral and a ladder, offers a spacious home so that your hairy friends rest, play and exercise. The loft is easy to clean thanks to its removable dirt tray. The small upper door makes it easy for you to place food and water for your rabbit, and lift it and remove it from the cage. It also has a lateral opening for access between this and the wooden ladder to run freely. The right side of the corral can also be removed if you want to expand the loft with additional space for the race. The fine mesh wire allows you to between fresh air, keep your pets in their place and allow them to monitor their surroundings. Also, this booth for rabbits is manufactured very carefully to give a rustic touch to your garden.

  • Color: White and Brown
  • Material: Wood
  • Dimensions: 147 x 53 x 85 cm (wide x high x high)
  • Upper level with 1 door and window
  • Outdoor running area with 3 doors and wire mesh
  • Extensible
  • With a non -slip ramp for easier access to the upper floor
  • Easy to clean thanks to the retractable tray
  • Fixed bituminous roof
  • Easy assembly

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.