Skip to product information
  • RIDDER Asiento de inodoro Generation cierre suave blanco 2119101

Ridder Toilet seat generation soft closure white 2119101

46,94 €
46,94 € 52,83 €
You save 11% (5,89 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

The Ridder generation toilet seat, manufactured in thermoplastic, is not only functional, but also presents a double toilet seat solution with its built -in children's toilet seat. The smallest seat can be easily withdrawn when the little ones have grown. It has a soft closure automatic lid and a seat reduction mechanism, and only a small touch is needed to close the seat slowly and silently. The superior fixation mechanism facilitates the installation of the toilet seat in small spaces or in difficult access places, for example, in toilets without holes for bolts in the lower part. Thanks to the assembly accessories included, adjustable hinges and their classical shape, the toilet seat Ridder adapts to all standard toilet cups. The soft closing toilet seat is hygienic and easy to clean thanks to the click'n'clean system.

  • Color: White
  • Material: nylon, plastic, stainless steel fiberglass
  • Dimensions (including hinges): approx. 44.5 x 37.2 x 5.0 cm (length x width x high)
  • Interior width: 23.7 cm
  • Children's seat opening (width): 13.1 cm
  • Space between hinges: 4.7-18.4 cm
  • Seat thickness: 3.6 cm (with toilet seat for children), 2.6 cm (no toilet seat for children)
  • Soft closing mechanism
  • Higher fixing mechanism
  • With toilet seat for removable children
  • Hygienic and easy to clean
  • Delivery includes assembly kit

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.