Skip to product information
  • Vetonek Abedul artificial blanco con 96 LEDs blanco cálido 180 cm

White artificial birch with 96 warm white LEDs 180 cm

55,15 €
55,15 € 62,07 €
You save 11% (6,92 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Take the beauty of nature home with this versatile white bold with LED. LED tree: This Christmas tree is equipped with 72 LEDs of low consumption and warm white color, which illuminate the house.8 lighting effects: The artificial tree has 8 different lighting effects: a combination of all effects, brightness Slow, flicker / intermittent, in wave, chasing / running water, sequential, constant ignition and slow fading. Decoration striking: This birch -looking tree is designed with delicate branches, so it will attract all eyes in your home. This discreet tree also with a warm white tone that adapts perfectly to traditional and modern decoration. Note: If you use the product abroad, make sure the USB connection is plugged in in a dry environment. Each product comes with a mounting manual in the box to facilitate the assembly. The product has a USB connector, but it is not included The 5 V Certified USB supply source.

  • Light color: warm white
  • LED bulbs number: 96 LEDs
  • Dimensions: 21 x 21 x 180 cm (length x width x high)
  • Power cable length: 5 m
  • Output voltage: DC 5 V
  • Power: 5 w
  • With a USB of 8 functions
  • Material: steel, plastic
  • It can be used outdoors
  • Delivery includes:
  • LED lights with USB
  • Base
  • Instruction Manual
This device is not designed to be used by people (including children) with reduced physical, sensory or mental abilities, or with lack of experience and knowledge, unless they have received supervision or instructions on the use of the apparatus by a responsible person of your safety. This product is not a toy. Do not allow children to play with the device. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.