{"title":"Compressor Accessories and Spare Parts","description":"\u003cp\u003eEverything you need to install, maintain and get the most out of your \u003cstrong\u003eair compressor\u003c\/strong\u003e: hoses and hose reels, quick couplers and fittings, threaded connectors, regulators, pressure gauges, lubricators, tyre inflators, air receivers and compressor oils.\u003c\/p\u003e\u003cp\u003eAlso includes \u003cstrong\u003ecompressor spare parts\u003c\/strong\u003e (pump heads, connecting rod, piston and valve kits, pressure switches, safety valves and intake filters) and \u003cstrong\u003ecompressed air treatment\u003c\/strong\u003e: filters, refrigerated dryers, automatic drains and oil-water separators.\u003c\/p\u003e","products":[{"product_id":"conector-regulador-compresor-pro10sa","title":"Pressure regulator connector for PRO10SA compressor","description":"\u003cp\u003eA leak in the regulator makes the compressor lose pressure, start more often than it should and use more electricity. If the problem is in the connector, you don't have to replace the whole regulator: this \u003cb\u003epressure regulator connector for the PRO10SA compressor\u003c\/b\u003e is the exact part to \u003cb\u003estop the leak\u003c\/b\u003e in a few minutes.\u003c\/p\u003e\n\u003cp\u003eIt is a \u003cb\u003especific spare part\u003c\/b\u003e from the PRO10SA parts breakdown, designed to replace a broken or leaking connector. An inexpensive repair that extends the life of your compressor.\u003c\/p\u003e\n\u003cp\u003eHaving the spare to hand avoids leaving the compressor out of action because of a small part: with the right spanner and a little thread sealant, the repair is done in minutes.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSpecific part:\u003c\/b\u003e for the PRO10SA compressor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStops leaks:\u003c\/b\u003e restores pressure and prevents constant restarts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInexpensive repair:\u003c\/b\u003e without replacing the whole regulator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQuick change:\u003c\/b\u003e with basic tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEnergy saving:\u003c\/b\u003e a leak-free compressor starts less often.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing a broken or leaking regulator connector.\u003c\/li\u003e\n\u003cli\u003eRepairing the PRO10SA regulation system.\u003c\/li\u003e\n\u003cli\u003ePreventive compressor maintenance.\u003c\/li\u003e\n\u003cli\u003eWorkshop spare to keep to hand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePart:\u003c\/b\u003e pressure regulator connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible compressor:\u003c\/b\u003e PRO10SA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e threaded, with sealant or PTFE tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e to locate the leak, spray soapy water on the joints with the compressor under pressure: wherever bubbles appear, that's where the leak is. Replace the connector with the compressor disconnected and the tank empty.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs it suitable for other compressors?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for the PRO10SA. For other models, check the part in their parts breakdown.\u003c\/p\u003e\n\u003ch3\u003eHow do I replace it?\u003c\/h3\u003e\n\u003cp\u003eDisconnect the compressor, drain the tank, unscrew the damaged connector and fit the new one with PTFE tape or thread sealant.\u003c\/p\u003e\n\u003ch3\u003eHow do I know if the leak is in the connector?\u003c\/h3\u003e\n\u003cp\u003eWith the compressor under pressure, spray soapy water: if bubbles appear at the connector, that's the part.\u003c\/p\u003e\n\u003ch3\u003eWhy is it important to fix a leak?\u003c\/h3\u003e\n\u003cp\u003eBecause the compressor loses pressure, starts more often, uses more energy and wears out sooner.\u003c\/p\u003e\n\u003ch3\u003eDo I need special tools?\u003c\/h3\u003e\n\u003cp\u003eNo, all you need is a suitable spanner and PTFE tape or thread sealant.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is it suitable for other compressors?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is intended for the PRO10SA. For other models, check the part in their parts breakdown.\"}},{\"@type\":\"Question\",\"name\":\"How do I replace it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Disconnect the compressor, drain the tank, unscrew the damaged connector and fit the new one with PTFE tape or thread sealant.\"}},{\"@type\":\"Question\",\"name\":\"How do I know if the leak is in the connector?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"With the compressor under pressure, spray soapy water: if bubbles appear at the connector, that's the part.\"}},{\"@type\":\"Question\",\"name\":\"Why is it important to fix a leak?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Because the compressor loses pressure, starts more often, uses more energy and wears out sooner.\"}},{\"@type\":\"Question\",\"name\":\"Do I need special tools?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, all you need is a suitable spanner and PTFE tape or thread sealant.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641391010139,"sku":"CEVIK-CA-PRO10SA-42","price":4.9,"currency_code":"EUR","in_stock":true}]},{"product_id":"kit-segmentos-juntas-piston-ap1500","title":"Piston ring and seal kit for AP1500 pump","description":"\u003cp\u003eIs your compressor taking longer and longer to fill, or no longer reaching cut-out pressure? With use, the piston ring wears and the pump \u003cb\u003eloses compression\u003c\/b\u003e. This \u003cb\u003episton ring and seal kit\u003c\/b\u003e restores the pump's tightness and your compressor's \u003cb\u003eoriginal air flow\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is the spare for the \u003cb\u003eAP1500\u003c\/b\u003e oil-free silent pump fitted to \u003cb\u003ePRO104 and PRO204\u003c\/b\u003e compressors. It includes the \u003cb\u003episton ring and seals\u003c\/b\u003e, everything needed for a complete, leak-free repair.\u003c\/p\u003e\n\u003cp\u003eIt is one of the most cost-effective repairs on an oil-free compressor: small, inexpensive parts that restore the lost performance to the unit.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRestores compression:\u003c\/b\u003e the compressor fills at its normal rate again.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eComplete kit:\u003c\/b\u003e piston ring and seals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpecific to AP1500:\u003c\/b\u003e for PRO104 and PRO204.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLeak-free after repair:\u003c\/b\u003e new seals every time the pump is opened.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInexpensive repair:\u003c\/b\u003e avoids replacing the whole pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRepairing the AP1500 pump.\u003c\/li\u003e\n\u003cli\u003eRestoring air flow on the PRO104 and PRO204.\u003c\/li\u003e\n\u003cli\u003eMaintenance of oil-free silent compressors.\u003c\/li\u003e\n\u003cli\u003eOverhaul after many working hours.\u003c\/li\u003e\n\u003cli\u003eRepair when the compressor doesn't reach cut-out pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePump:\u003c\/b\u003e AP1500 silent, oil-free\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompressors:\u003c\/b\u003e PRO104 and PRO204\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eContents:\u003c\/b\u003e piston ring and seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e fit the new ring carefully so as not to score the cylinder and always replace the seals when opening the pump; reusing an old seal is the most common cause of leaks after a repair.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhen do the piston rings need replacing?\u003c\/h3\u003e\n\u003cp\u003eWhen the compressor loses air flow or takes a long time to reach pressure and the valve plate is in good condition.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for the AP1100?\u003c\/h3\u003e\n\u003cp\u003eNo, this kit is for the AP1500 pump.\u003c\/p\u003e\n\u003ch3\u003eWhat's included?\u003c\/h3\u003e\n\u003cp\u003eThe piston ring and seals for the AP1500 pump.\u003c\/p\u003e\n\u003ch3\u003eIs it worth replacing anything else?\u003c\/h3\u003e\n\u003cp\u003eAlso check the connecting rod and the valve plate, which have their own replacement kits.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it myself?\u003c\/h3\u003e\n\u003cp\u003eWith mechanical experience, yes. Disconnect the compressor and drain the tank before starting.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"When do the piston rings need replacing?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"When the compressor loses air flow or takes a long time to reach pressure and the valve plate is in good condition.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for the AP1100?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, this kit is for the AP1500 pump.\"}},{\"@type\":\"Question\",\"name\":\"What's included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The piston ring and seals for the AP1500 pump.\"}},{\"@type\":\"Question\",\"name\":\"Is it worth replacing anything else?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Also check the connecting rod and the valve plate, which have their own replacement kits.\"}},{\"@type\":\"Question\",\"name\":\"Can I fit it myself?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"With mechanical experience, yes. Disconnect the compressor and drain the tank before starting.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641391305051,"sku":"CEVIK-CA-PRO104-KIT5","price":13.38,"currency_code":"EUR","in_stock":true}]},{"product_id":"kit-biela-cabezal-sin-aceite","title":"Connecting rod kit for oil-free silent compressor pump","description":"\u003cp\u003eA metallic knocking in the pump, unusual vibrations or a compressor that delivers less air even though the motor turns normally: these are the typical symptoms of a \u003cb\u003eworn connecting rod\u003c\/b\u003e. With this \u003cb\u003econnecting rod kit\u003c\/b\u003e you can repair it yourself and the compressor works \u003cb\u003esmoothly and at full air flow\u003c\/b\u003e again.\u003c\/p\u003e\n\u003cp\u003eIt is the spare for the \u003cb\u003eAP1100\u003c\/b\u003e (\u003cb\u003ePRO103SILENT\u003c\/b\u003e compressor) and \u003cb\u003eAP1500\u003c\/b\u003e (\u003cb\u003ePRO104 and PRO204\u003c\/b\u003e compressors) oil-free silent pumps. An inexpensive repair that saves replacing the whole pump.\u003c\/p\u003e\n\u003cp\u003eAs these are oil-free pumps, the condition of the connecting rod is key: with play, the piston runs off-centre and wears the ring and cylinder sooner.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEliminates knocking:\u003c\/b\u003e corrects play caused by wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRestores air flow:\u003c\/b\u003e the piston works properly again.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo versions:\u003c\/b\u003e AP1100 and AP1500.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInexpensive repair:\u003c\/b\u003e without replacing the whole pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOil-free pumps:\u003c\/b\u003e specific to silent units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRepairing AP1100 pumps on the PRO103SILENT.\u003c\/li\u003e\n\u003cli\u003eRepairing AP1500 pumps on the PRO104 and PRO204.\u003c\/li\u003e\n\u003cli\u003eFixing noise and vibration in the pump.\u003c\/li\u003e\n\u003cli\u003eMaintenance of silent compressors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAP1100:\u003c\/b\u003e for PRO103SILENT compressor\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAP1500:\u003c\/b\u003e for PRO104 and PRO204 compressors\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePump type:\u003c\/b\u003e silent, oil-free\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eContents:\u003c\/b\u003e connecting rod kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e if you replace the connecting rod, take the opportunity to check the piston ring and seals and the valve plate: the pump is already open and the cost of the kit is small. Always work with the compressor disconnected and the tank empty.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if the connecting rod is faulty?\u003c\/h3\u003e\n\u003cp\u003eMetallic knocking in the pump, abnormal vibration or loss of air flow while the motor turns normally.\u003c\/p\u003e\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\n\u003cp\u003eThe AP1100 for the PRO103SILENT and the AP1500 for the PRO104 and PRO204.\u003c\/p\u003e\n\u003ch3\u003eWhat else is worth replacing at the same time?\u003c\/h3\u003e\n\u003cp\u003eCheck the piston ring and seals and the valve plate, which also have replacement kits.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it myself?\u003c\/h3\u003e\n\u003cp\u003eWith mechanical experience, yes. Disconnect the compressor and drain the tank before opening the pump.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for lubricated pumps?\u003c\/h3\u003e\n\u003cp\u003eNo, it is for the AP1100 and AP1500 oil-free silent pumps.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How do I know if the connecting rod is faulty?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Metallic knocking in the pump, abnormal vibration or loss of air flow while the motor turns normally.\"}},{\"@type\":\"Question\",\"name\":\"Which one do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The AP1100 for the PRO103SILENT and the AP1500 for the PRO104 and PRO204.\"}},{\"@type\":\"Question\",\"name\":\"What else is worth replacing at the same time?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Check the piston ring and seals and the valve plate, which also have replacement kits.\"}},{\"@type\":\"Question\",\"name\":\"Can I fit it myself?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"With mechanical experience, yes. Disconnect the compressor and drain the tank before opening the pump.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for lubricated pumps?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, it is for the AP1100 and AP1500 oil-free silent pumps.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"AP1100 · PRO103SILENT","offer_id":54641391632731,"sku":"CEVIK-CA-PRO103-KIT4","price":16.46,"currency_code":"EUR","in_stock":true},{"title":"AP1500 · PRO104\/PRO204","offer_id":54641391665499,"sku":"CEVIK-CA-PRO104-KIT4","price":16.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/kit-biela-cabezal-sin-aceite-vica-work-1.jpg?v=1793863605"},{"product_id":"kit-placa-valvulas-cabezal-sin-aceite","title":"Valve plate kit for silent compressor pump","description":"\u003cp\u003eWhen a compressor \u003cb\u003etakes a long time to fill\u003c\/b\u003e, doesn't reach cut-out pressure or the pump \u003cb\u003eoverheats\u003c\/b\u003e, the valve plate is usually the culprit. With this \u003cb\u003evalve plate kit\u003c\/b\u003e you replace the damaged part and the compressor regains its \u003cb\u003enormal air flow and working temperature\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is the spare for the \u003cb\u003eAP1100\u003c\/b\u003e (\u003cb\u003ePRO103\u003c\/b\u003e compressor) and \u003cb\u003eAP1500\u003c\/b\u003e (\u003cb\u003ePRO104 and PRO204\u003c\/b\u003e compressors) oil-free silent pumps. A simple, inexpensive repair that saves replacing the whole pump.\u003c\/p\u003e\n\u003cp\u003eThe reeds on the plate work thousands of times a minute and, over time or with dirt in the intake, lose their seal: replacing them is the quickest way to restore the compressor's performance.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRestores air flow:\u003c\/b\u003e the tank fills at its normal rate again.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLower temperature:\u003c\/b\u003e the pump stops overheating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo versions:\u003c\/b\u003e AP1100 and AP1500.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInexpensive repair:\u003c\/b\u003e without replacing the whole pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOil-free pumps:\u003c\/b\u003e specific to silent units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRepairing AP1100 pumps on the PRO103.\u003c\/li\u003e\n\u003cli\u003eRepairing AP1500 pumps on the PRO104 and PRO204.\u003c\/li\u003e\n\u003cli\u003eCompressors that don't reach cut-out pressure.\u003c\/li\u003e\n\u003cli\u003eMaintenance of silent compressors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAP1100:\u003c\/b\u003e for PRO103 compressor\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAP1500:\u003c\/b\u003e for PRO104 and PRO204 compressors\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePump type:\u003c\/b\u003e silent, oil-free\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eContents:\u003c\/b\u003e valve plate kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e replace the valve plate with the compressor disconnected and the tank empty, clean the cylinder head seat thoroughly and tighten the bolts in a cross pattern, gradually. Also check the intake filter: dirt damages the valves.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhen does the valve plate need replacing?\u003c\/h3\u003e\n\u003cp\u003eIf the compressor loses air flow, is slow to fill the tank or doesn't reach cut-out pressure, while the motor runs normally.\u003c\/p\u003e\n\u003ch3\u003eWhich one do I need?\u003c\/h3\u003e\n\u003cp\u003eThe AP1100 for the PRO103 and the AP1500 for the PRO104 and PRO204.\u003c\/p\u003e\n\u003ch3\u003eWhy does the pump overheat?\u003c\/h3\u003e\n\u003cp\u003eA valve plate that doesn't close properly causes the air to be recompressed and the pump runs hotter.\u003c\/p\u003e\n\u003ch3\u003eWhat else should I check?\u003c\/h3\u003e\n\u003cp\u003eThe piston ring and seals, the connecting rod and the intake filter.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it myself?\u003c\/h3\u003e\n\u003cp\u003eWith mechanical experience, yes: disconnect the compressor, drain the tank and tighten the bolts in a cross pattern when fitting.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"When does the valve plate need replacing?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"If the compressor loses air flow, is slow to fill the tank or doesn't reach cut-out pressure, while the motor runs normally.\"}},{\"@type\":\"Question\",\"name\":\"Which one do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The AP1100 for the PRO103 and the AP1500 for the PRO104 and PRO204.\"}},{\"@type\":\"Question\",\"name\":\"Why does the pump overheat?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A valve plate that doesn't close properly causes the air to be recompressed and the pump runs hotter.\"}},{\"@type\":\"Question\",\"name\":\"What else should I check?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The piston ring and seals, the connecting rod and the intake filter.\"}},{\"@type\":\"Question\",\"name\":\"Can I fit it myself?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"With mechanical experience, yes: disconnect the compressor, drain the tank and tighten the bolts in a cross pattern when fitting.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"AP1100 · PRO103","offer_id":54641391993179,"sku":"CEVIK-CA-PRO103-KIT3","price":16.46,"currency_code":"EUR","in_stock":true},{"title":"AP1500 · PRO104\/PRO204","offer_id":54641392025947,"sku":"CEVIK-CA-PRO104-KIT3","price":16.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/kit-placa-valvulas-cabezal-sin-aceite-vica-work-1.jpg?v=1793863630"},{"product_id":"kit-ruedas-compresor-silencioso","title":"Replacement wheel kit for PRO103, PRO104 and PRO204 compressors","description":"\u003cp\u003eA broken or jammed wheel turns moving the compressor into a problem. With this \u003cb\u003ereplacement wheel kit\u003c\/b\u003e for \u003cb\u003ePRO103, PRO104 and PRO204\u003c\/b\u003e compressors you restore the \u003cb\u003eunit's mobility\u003c\/b\u003e with the exact part from its parts breakdown, with no adaptations.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cb\u003e76 mm front swivel castor with brake\u003c\/b\u003e, with its bolt (parts 59-60-61 in the parts breakdown), or the \u003cb\u003e200 mm puncture-proof rear wheel\u003c\/b\u003e (parts 53-54-55-56 in the parts breakdown). The front castor lets you turn the compressor and brake it in place; the rear wheel takes the weight and site terrain without puncturing.\u003c\/p\u003e\n\u003cp\u003eKeeping the wheels in good condition is also a matter of safety: a compressor that moves on its own or tips over can damage the installation or injure people.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eExact part from the parts breakdown:\u003c\/b\u003e direct fit on PRO103, PRO104 and PRO204.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront swivel castor with brake:\u003c\/b\u003e manoeuvring and locking the compressor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePuncture-proof rear wheel:\u003c\/b\u003e no inner tubes or punctures on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e76 and 200 mm diameters:\u003c\/b\u003e depending on the position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRestores mobility:\u003c\/b\u003e move the compressor effortlessly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing broken or jammed wheels.\u003c\/li\u003e\n\u003cli\u003eRepair after knocks or wear on site.\u003c\/li\u003e\n\u003cli\u003eMaintenance of PRO103, PRO104 and PRO204 compressors.\u003c\/li\u003e\n\u003cli\u003eSpare for workshops with several units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eFront:\u003c\/b\u003e swivel castor with brake and bolt · Ø 76 mm · parts 59-60-61\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRear:\u003c\/b\u003e puncture-proof wheel · Ø 200 mm · parts 53-54-55-56\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible compressors:\u003c\/b\u003e PRO103, PRO104 and PRO204\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e tighten the front castor bolt without overdoing it so that it can swivel freely, and always apply the brake when the compressor is working on a sloping surface.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow many wheels does the kit include?\u003c\/h3\u003e\n\u003cp\u003eEach kit corresponds to the position indicated (front or rear) with the parts listed in the parts breakdown.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for other compressors?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for the PRO103, PRO104 and PRO204. For other models, check the diameter and fixing.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the front and rear wheels?\u003c\/h3\u003e\n\u003cp\u003eThe front one is a 76 mm swivel castor with brake; the rear one is a 200 mm puncture-proof wheel.\u003c\/p\u003e\n\u003ch3\u003eCan the rear wheel get a puncture?\u003c\/h3\u003e\n\u003cp\u003eNo, it is a puncture-proof wheel.\u003c\/p\u003e\n\u003ch3\u003eAre the bolts included?\u003c\/h3\u003e\n\u003cp\u003eThe front castor includes its bolt (parts 59-60-61); the rear wheel, parts 53-54-55-56 of the parts breakdown.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How many wheels does the kit include?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Each kit corresponds to the position indicated (front or rear) with the parts listed in the parts breakdown.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for other compressors?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is intended for the PRO103, PRO104 and PRO204. For other models, check the diameter and fixing.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between the front and rear wheels?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The front one is a 76 mm swivel castor with brake; the rear one is a 200 mm puncture-proof wheel.\"}},{\"@type\":\"Question\",\"name\":\"Can the rear wheel get a puncture?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, it is a puncture-proof wheel.\"}},{\"@type\":\"Question\",\"name\":\"Are the bolts included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The front castor includes its bolt (parts 59-60-61); the rear wheel, parts 53-54-55-56 of the parts breakdown.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Front swivel castor with brake Ø 76 mm","offer_id":54641392288091,"sku":"CEVIK-CA-PRO103-KIT1","price":12.35,"currency_code":"EUR","in_stock":true},{"title":"Rear puncture-proof wheel Ø 200 mm","offer_id":54641392320859,"sku":"CEVIK-CA-PRO103-KIT2","price":16.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/kit-ruedas-compresor-silencioso-vica-work-1.jpg?v=1793863642"},{"product_id":"kit-recambios-separador-aceite-agua-ew30","title":"Spare parts kit for EW30 oil-water separator","description":"\u003cp\u003e\u003cstrong\u003eClean drain water, every time.\u003c\/strong\u003e Spare parts kit for the \u003cstrong\u003eEW30\u003c\/strong\u003e oil-water separator, the unit that treats the condensate drained from the compressor and air receiver to separate the oil from the water before it is discharged.\u003c\/p\u003e\n\u003cp\u003eReplacing the separator elements when due is what keeps the outlet water clean and stops the unit from becoming saturated: simple maintenance that avoids discharge problems and extends the life of the separator.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDedicated spare part:\u003c\/strong\u003e for the EW30 condensate separator.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClean outlet water:\u003c\/strong\u003e the separator performs like new again.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePrevents saturation:\u003c\/strong\u003e no oil overflow or blockages.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEasy maintenance:\u003c\/strong\u003e hassle-free periodic replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePeriodic maintenance of the EW30 separator.\u003c\/li\u003e\n\u003cli\u003eInstallations with screw compressors and automatic drains.\u003c\/li\u003e\n\u003cli\u003eWorkshops and industry that treat their own condensate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy maintenance matters\u003c\/h3\u003e\n\u003cp\u003eA separator with saturated elements lets oil through into the outlet water, which is exactly what you want to avoid when treating condensate. Replacing the kit when due keeps the unit working as it should.\u003c\/p\u003e\n\u003ch3\u003eTechnical features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e spare parts kit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e EW30 condensate oil\/water separator\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e periodic maintenance of the separator\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReference:\u003c\/strong\u003e CA-8193440\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVetonek tip:\u003c\/strong\u003e write the date of each change on the separator itself: that way you will know when the next one is due without relying on memory. If the outlet water starts to look cloudy, bring the change forward.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich unit is this kit for?\u003c\/h3\u003e\n\u003cp\u003eFor the EW30 model condensate oil-water separator.\u003c\/p\u003e\n\u003ch3\u003eHow often does it need replacing?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the compressor running hours and the amount of condensate; follow the instructions in the separator manual.\u003c\/p\u003e\n\u003ch3\u003eHow do I know when it is due?\u003c\/h3\u003e\n\u003cp\u003eWhen the outlet water no longer looks clean or the interval given in the manual has been reached.\u003c\/p\u003e\n\u003ch3\u003eWhat is the EW30 separator for?\u003c\/h3\u003e\n\u003cp\u003eIt treats the condensate drained from the compressor and air receiver to separate the oil from the water before it is discharged.\u003c\/p\u003e\n\u003ch3\u003eIs it difficult to install?\u003c\/h3\u003e\n\u003cp\u003eIt is a periodic maintenance spare part; follow the steps in the EW30 separator manual.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which unit is this kit for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For the EW30 model condensate oil-water separator.\"}},{\"@type\":\"Question\",\"name\":\"How often does it need replacing?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It depends on the compressor running hours and the amount of condensate; follow the instructions in the separator manual.\"}},{\"@type\":\"Question\",\"name\":\"How do I know when it is due?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"When the outlet water no longer looks clean or the interval given in the manual has been reached.\"}},{\"@type\":\"Question\",\"name\":\"What is the EW30 separator for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It treats the condensate drained from the compressor and air receiver to separate the oil from the water before it is discharged.\"}},{\"@type\":\"Question\",\"name\":\"Is it difficult to install?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is a periodic maintenance spare part; follow the steps in the EW30 separator manual.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641392845147,"sku":"CEVIK-CA-8193440","price":214.62,"currency_code":"EUR","in_stock":true}]},{"product_id":"cabezal-compresor-sin-aceite","title":"Replacement motor-pump for oil-free silent compressor","description":"\u003cp\u003eA replacement \u003cb\u003eoil-free silent motor and pump\u003c\/b\u003e unit, \u003cb\u003e230 V\u003c\/b\u003e, to bring back to life a silent compressor whose motor has burnt out or whose pump has lost performance. The complete assembly is replaced, without having to change the compressor.\u003c\/p\u003e\n\u003cp\u003eEach model corresponds to a specific compressor range: \u003cb\u003eAP400T\u003c\/b\u003e (1 HP) for PRO6XS, \u003cb\u003eAP750\u003c\/b\u003e (1.5 HP) for PRO24SILENC and PRO80SILENC, \u003cb\u003eAP1100\u003c\/b\u003e (1.5 HP) for PRO103SILENT, \u003cb\u003eAP1500T\u003c\/b\u003e (2 HP) for PRO27XS and PRO52XS, and \u003cb\u003eAP1500\u003c\/b\u003e (2 HP) for PRO104SILENT. Check the model on your compressor's rating plate.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eExact replacement:\u003c\/b\u003e each pump is matched to its compressor model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOil-free:\u003c\/b\u003e no lubrication or oil changes required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSilent:\u003c\/b\u003e keeps the compressor's original low noise level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e230 V:\u003c\/b\u003e single-phase, like the compressor it replaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCheaper than a new compressor:\u003c\/b\u003e you reuse the tank, pressure switch and accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRepairing silent compressors with a burnt-out motor.\u003c\/li\u003e\n\u003cli\u003eRestoring air flow on worn pumps.\u003c\/li\u003e\n\u003cli\u003eService centres and compressor repair workshops.\u003c\/li\u003e\n\u003cli\u003eKeeping the workshop or home compressor running.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAP400T:\u003c\/b\u003e 1 HP · 230 V · 105 L\/min intake · for PRO6XS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAP750:\u003c\/b\u003e 1.5 HP · 230 V · 4-pole · for PRO24SILENC and PRO80SILENC\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAP1100:\u003c\/b\u003e 1.5 HP · 230 V · 4-pole · 150 L\/min intake · for PRO103SILENT\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAP1500T:\u003c\/b\u003e 2 HP · 230 V · 2-pole · 230 L\/min intake · for PRO27XS and PRO52XS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAP1500:\u003c\/b\u003e 2 HP · 4-pole · low rpm · for PRO104SILENT\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLubrication:\u003c\/b\u003e oil-free\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e silent pump with electric motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e before replacing the pump, check the \u003cb\u003estart capacitor\u003c\/b\u003e and the pressure switch: a motor that hums but won't start often just has a faulty capacitor. If the pump is fine but delivers little air, first check the valve plate and piston rings, which have replacement kits.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know which pump my compressor has?\u003c\/h3\u003e\n\u003cp\u003eCheck the model on the compressor's rating plate (PRO6XS, PRO24SILENC, PRO80SILENC, PRO103SILENT, PRO104SILENT, PRO27XS or PRO52XS) and choose the pump specified for it.\u003c\/p\u003e\n\u003ch3\u003eDoes it include the electric motor?\u003c\/h3\u003e\n\u003cp\u003eYes, it is the complete oil-free silent motor and pump assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat voltage does it need?\u003c\/h3\u003e\n\u003cp\u003e230 V single-phase.\u003c\/p\u003e\n\u003ch3\u003eIs it difficult to fit?\u003c\/h3\u003e\n\u003cp\u003eIt can be fitted by a user with mechanical and electrical experience, after disconnecting the compressor and draining the tank. If in doubt, go to a service centre.\u003c\/p\u003e\n\u003ch3\u003eDoes it need oil?\u003c\/h3\u003e\n\u003cp\u003eNo, it is an oil-free pump: there is no lubricant to top up or change and the air comes out clean from the source.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How do I know which pump my compressor has?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Check the model on the compressor's rating plate (PRO6XS, PRO24SILENC, PRO80SILENC, PRO103SILENT, PRO104SILENT, PRO27XS or PRO52XS) and choose the pump specified for it.\"}},{\"@type\":\"Question\",\"name\":\"Does it include the electric motor?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, it is the complete oil-free silent motor and pump assembly.\"}},{\"@type\":\"Question\",\"name\":\"What voltage does it need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"230 V single-phase.\"}},{\"@type\":\"Question\",\"name\":\"Is it difficult to fit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It can be fitted by a user with mechanical and electrical experience, after disconnecting the compressor and draining the tank. If in doubt, go to a service centre.\"}},{\"@type\":\"Question\",\"name\":\"Does it need oil?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, it is an oil-free pump: there is no lubricant to top up or change and the air comes out clean from the source.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"AP400T · 1 HP · PRO6XS","offer_id":54641393041755,"sku":"CEVIK-CA-AP400T","price":93.1,"currency_code":"EUR","in_stock":true},{"title":"AP750 · 1.5 HP · PRO24\/PRO80SILENC","offer_id":54641393074523,"sku":"CEVIK-CA-AP750B","price":122.5,"currency_code":"EUR","in_stock":true},{"title":"AP1100 · 1.5 HP · PRO103SILENT","offer_id":54641393107291,"sku":"CEVIK-CA-AP1100","price":171.5,"currency_code":"EUR","in_stock":true},{"title":"AP1500T · 2 HP · PRO27XS\/PRO52XS","offer_id":54641393140059,"sku":"CEVIK-CA-AP1500T","price":112.7,"currency_code":"EUR","in_stock":true},{"title":"AP1500 · 2 HP · PRO104SILENT","offer_id":54641393172827,"sku":"CEVIK-CA-AP1500","price":185.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/cabezal-compresor-sin-aceite-vica-work-1.jpg?v=1793863688"},{"product_id":"cabezal-compresor-correas-hierro-fundido","title":"Lubricated cast iron belt-driven compressor pump","description":"\u003cp\u003eThe \u003cb\u003ecompressor pump\u003c\/b\u003e is the heart of a belt-driven compressor. These \u003cb\u003elubricated cast iron pumps\u003c\/b\u003e serve as replacements for workshop belt-driven compressors or for building your own unit, from \u003cb\u003e2 HP to 7.5 HP\u003c\/b\u003e, single- or two-stage and up to \u003cb\u003e10 bar\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003eMK102, MK103 and BK113\u003c\/b\u003e have a cast iron cylinder block, cylinder head with large fins, balanced spheroidal graphite iron crankshaft, stainless steel valves, high-flow pulley with deflector and labyrinth intake filter. The \u003cb\u003eBK114 and BK119\u003c\/b\u003e are \u003cb\u003etwo-stage with intercooler and inter-stage safety valve\u003c\/b\u003e, cast iron cylinder and aluminium crankcase and head, and are supplied \u003cb\u003ewith a 1B pulley\u003c\/b\u003e. The \u003cb\u003eK28\u003c\/b\u003e is a 4 HP high-performance pump.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCast iron:\u003c\/b\u003e robust cylinders for many hours of work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLow speed:\u003c\/b\u003e smooth running, less wear and longer maintenance intervals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSingle or two-stage:\u003c\/b\u003e choose between single-stage MK102\/MK103 or two-stage BK113, BK114 and BK119.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInter-stage cooling:\u003c\/b\u003e BK114 and BK119 with intercooler and intermediate safety valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eComplete range:\u003c\/b\u003e from 2 to 7.5 HP and from 235 to 840 L\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing the worn pump of a belt-driven compressor.\u003c\/li\u003e\n\u003cli\u003eBuilding or rebuilding workshop compressors.\u003c\/li\u003e\n\u003cli\u003eService centres and repair workshops.\u003c\/li\u003e\n\u003cli\u003eAir units for machinery and industrial use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMK102:\u003c\/b\u003e 2 HP · 2 cylinders, 1 stage · 235 L\/min free air delivery · 10 bar · 8 kg · 27 x 26 x 28 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMK103:\u003c\/b\u003e 3 HP · 2 cylinders, 1 stage · 365 L\/min free air delivery · 10 bar · 8 kg (9 kg packed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eK28:\u003c\/b\u003e 4 HP · 539 L\/min intake · 10 bar · 1,400 rpm · 26.5 kg packed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBK113:\u003c\/b\u003e 5.5 HP · 2 cylinders, 2 stages · 550 L\/min free air delivery · 10 bar · 17 kg packed (pump of the PRO300-5.5TF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBK114 with 1B pulley:\u003c\/b\u003e 5.5 HP · 2 cylinders, 2 stages · 10 bar (14 bar version on the 90 L compressor) · 25.5 kg packed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBK119 with 1B pulley:\u003c\/b\u003e 7.5 HP (5.5 kW) · 2 stages · 840 L\/min · 10 bar · 1,250 rpm · 27 kg packed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLubrication:\u003c\/b\u003e oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrive:\u003c\/b\u003e belts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e when you replace the pump, also replace the \u003cb\u003ebelt\u003c\/b\u003e and check the pulley alignment; an old or misaligned belt will wear out the new pump in a few hours. Fill it with compressor oil of the specified viscosity and do the first oil change after the initial running-in hours.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich pump do I need?\u003c\/h3\u003e\n\u003cp\u003eThe same model fitted to your compressor (MK102, MK103, K28, BK113, BK114 or BK119), or one with power equivalent to the motor and the same pulley.\u003c\/p\u003e\n\u003ch3\u003eAre they supplied with oil?\u003c\/h3\u003e\n\u003cp\u003eThey are lubricated pumps; check the level and fill with compressor oil before starting up.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between single and two-stage?\u003c\/h3\u003e\n\u003cp\u003eIn two-stage pumps the air is compressed in two phases with intercooling; it runs cooler and performs better at high pressures and in heavy-duty use.\u003c\/p\u003e\n\u003ch3\u003eDo they include a pulley?\u003c\/h3\u003e\n\u003cp\u003eThe BK114 and BK119 are supplied with a 1B pulley; the MK102, MK103 and BK113 have a high-flow pulley with deflector.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between intake air and free air delivery?\u003c\/h3\u003e\n\u003cp\u003eIntake air is what enters the pump; free air delivery is what it actually delivers to the tank, which is always somewhat less. To compare pumps, always use the same figure.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which pump do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The same model fitted to your compressor (MK102, MK103, K28, BK113, BK114 or BK119), or one with power equivalent to the motor and the same pulley.\"}},{\"@type\":\"Question\",\"name\":\"Are they supplied with oil?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"They are lubricated pumps; check the level and fill with compressor oil before starting up.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between single and two-stage?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"In two-stage pumps the air is compressed in two phases with intercooling; it runs cooler and performs better at high pressures and in heavy-duty use.\"}},{\"@type\":\"Question\",\"name\":\"Do they include a pulley?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The BK114 and BK119 are supplied with a 1B pulley; the MK102, MK103 and BK113 have a high-flow pulley with deflector.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between intake air and free air delivery?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Intake air is what enters the pump; free air delivery is what it actually delivers to the tank, which is always somewhat less. To compare pumps, always use the same figure.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"MK102 · 2 HP · 1 stage","offer_id":54641393828187,"sku":"CEVIK-CA41P0017SGLF","price":171.5,"currency_code":"EUR","in_stock":true},{"title":"MK103 · 3 HP · 1 stage","offer_id":54641393860955,"sku":"CEVIK-CA41P0019SGLF","price":191.1,"currency_code":"EUR","in_stock":true},{"title":"K28 · 4 HP","offer_id":54641393893723,"sku":"CEVIK-CASH0000A","price":587.02,"currency_code":"EUR","in_stock":true},{"title":"BK113 · 5.5 HP · 2 stages","offer_id":54641393926491,"sku":"CEVIK-CABU0000AF","price":456.68,"currency_code":"EUR","in_stock":true},{"title":"BK114 · 5.5 HP · 2 stages · 1B pulley","offer_id":54641393959259,"sku":"CEVIK-CA-BZ0000M","price":514.5,"currency_code":"EUR","in_stock":true},{"title":"BK119 · 7.5 HP · 2 stages · 1B pulley","offer_id":54641393992027,"sku":"CEVIK-CA-BR0001R","price":645.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/cabezal-compresor-correas-hierro-fundido-vica-work-1.jpg?v=1793863737"},{"product_id":"filtro-industrial-aceite-aire-comprimido","title":"Industrial compressed air oil filter with cartridge","description":"\u003cp\u003e\u003cstrong\u003eOil-free air for unforgiving tools, paintwork and machinery.\u003c\/strong\u003e An industrial in-line filter that traps the oil carried over in compressed air in workshops and industry. It is fitted at the compressor or air receiver outlet so that much cleaner air reaches tools, spray guns and process equipment.\u003c\/p\u003e\n\u003cp\u003eThree series and four flow rates to suit your installation: \u003cstrong\u003eQF and DK\u003c\/strong\u003e with 0.01 micron filtration and \u003cstrong\u003eVK\u003c\/strong\u003e with 0.003 micron filtration, for 570, 1,300, 2,000 and 3,500 L\/min. All are supplied with the filter cartridge included.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVery fine filtration:\u003c\/strong\u003e 0.01 µm (QF and DK) or 0.003 µm (VK).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFour flow rates:\u003c\/strong\u003e from 570 to 3,500 L\/min for every compressor size.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCartridge included:\u003c\/strong\u003e ready to install.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtects your investment:\u003c\/strong\u003e less oil in pipework, tools and finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAir installations in workshops and industry.\u003c\/li\u003e\n\u003cli\u003eSpray booths and paint lines that need clean air.\u003c\/li\u003e\n\u003cli\u003eCascade installation with particulate pre-filters and dryer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e industrial oil filter for compressed air\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e QF and DK (0.01 micron) · VK (0.003 micron)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFlow rates:\u003c\/strong\u003e 570 \/ 1,300 \/ 2,000 \/ 3,500 L\/min\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCartridge:\u003c\/strong\u003e included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVetonek tip:\u003c\/strong\u003e choose the filter for the actual flow rate of your compressor (or slightly above), never below: an undersized filter causes a pressure drop. For very clean air, install filters in cascade, from coarsest to finest, and fit an automatic drain on each bowl.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich flow rate should I choose?\u003c\/h3\u003e\n\u003cp\u003eOne equal to or higher than the flow your compressor delivers in L\/min, so as not to restrict the installation.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the series?\u003c\/h3\u003e\n\u003cp\u003eAccording to the manufacturer's price list, QF and DK filter down to 0.01 micron and the VK series down to 0.003 micron.\u003c\/p\u003e\n\u003ch3\u003eDoes it include the filter element?\u003c\/h3\u003e\n\u003cp\u003eYes, each filter is supplied with its cartridge included.\u003c\/p\u003e\n\u003ch3\u003eWhere is it installed?\u003c\/h3\u003e\n\u003cp\u003eAt the compressor or air receiver outlet, in the main air line, before the points of use.\u003c\/p\u003e\n\u003ch3\u003eDo I need a pre-filter?\u003c\/h3\u003e\n\u003cp\u003eTo extend the life of the cartridge, it is advisable to fit a particulate filter upstream, from coarsest to finest.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which flow rate should I choose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"One equal to or higher than the flow your compressor delivers in L\/min, so as not to restrict the installation.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between the series?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"According to the manufacturer's price list, QF and DK filter down to 0.01 micron and the VK series down to 0.003 micron.\"}},{\"@type\":\"Question\",\"name\":\"Does it include the filter element?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, each filter is supplied with its cartridge included.\"}},{\"@type\":\"Question\",\"name\":\"Where is it installed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"At the compressor or air receiver outlet, in the main air line, before the points of use.\"}},{\"@type\":\"Question\",\"name\":\"Do I need a pre-filter?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"To extend the life of the cartridge, it is advisable to fit a particulate filter upstream, from coarsest to finest.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"QF · 570 L\/min · 0.01 µm","offer_id":54641394057563,"sku":"CEVIK-CA-QKF570","price":127.4,"currency_code":"EUR","in_stock":true},{"title":"QF · 1,300 L\/min · 0.01 µm","offer_id":54641394090331,"sku":"CEVIK-CA-QKF1300","price":147.0,"currency_code":"EUR","in_stock":true},{"title":"QF · 2,000 L\/min · 0.01 µm","offer_id":54641394123099,"sku":"CEVIK-CA-QKF2000","price":166.6,"currency_code":"EUR","in_stock":true},{"title":"QF · 3,500 L\/min · 0.01 µm","offer_id":54641394155867,"sku":"CEVIK-CA-QKF3500","price":205.8,"currency_code":"EUR","in_stock":true},{"title":"DK · 570 L\/min · 0.01 µm","offer_id":54641394188635,"sku":"CEVIK-CA-DKF570","price":127.4,"currency_code":"EUR","in_stock":true},{"title":"DK · 1,300 L\/min · 0.01 µm","offer_id":54641394221403,"sku":"CEVIK-CA-DKF1300","price":147.0,"currency_code":"EUR","in_stock":true},{"title":"DK · 2,000 L\/min · 0.01 µm","offer_id":54641394254171,"sku":"CEVIK-CA-DKF2000","price":166.6,"currency_code":"EUR","in_stock":true},{"title":"DK · 3,500 L\/min · 0.01 µm","offer_id":54641394286939,"sku":"CEVIK-CA-DKF3500","price":205.8,"currency_code":"EUR","in_stock":true},{"title":"VK · 570 L\/min · 0.003 µm","offer_id":54641394319707,"sku":"CEVIK-CA-VKF570","price":127.4,"currency_code":"EUR","in_stock":true},{"title":"VK · 1,300 L\/min · 0.003 µm","offer_id":54641394352475,"sku":"CEVIK-CA-VKF1300","price":147.0,"currency_code":"EUR","in_stock":true},{"title":"VK · 2,000 L\/min · 0.003 µm","offer_id":54641394385243,"sku":"CEVIK-CA-VKF2000","price":166.6,"currency_code":"EUR","in_stock":true},{"title":"VK · 3,500 L\/min · 0.003 µm","offer_id":54641394418011,"sku":"CEVIK-CA-VKF3500","price":205.8,"currency_code":"EUR","in_stock":true}]},{"product_id":"cabezal-recambio-compresor-pro100vc-3m","title":"Replacement pump for PRO100VC-3M belt-driven compressor","description":"\u003cp\u003eIf your \u003cb\u003ePRO100VC-3M\u003c\/b\u003e compressor no longer fills as it used to, makes strange noises or the pump is damaged, there is no need to replace the whole unit. This \u003cb\u003ereplacement pump\u003c\/b\u003e for the \u003cb\u003ePRO100VC-3M belt-driven compressor (100 litres, 3 HP, 230 V)\u003c\/b\u003e restores its performance while keeping the motor, tank and other components.\u003c\/p\u003e\n\u003cp\u003eIt is the cheapest and fastest solution when the original pump has lost compression or broken down: replace the pump, check the belt and oil, and the compressor is back to work.\u003c\/p\u003e\n\u003cp\u003eAs it is the specific spare for this model, the fixings, pulley and connections match, so fitting is straightforward with no adaptations.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSpecific spare:\u003c\/b\u003e for the PRO100VC-3M compressor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSavings:\u003c\/b\u003e much cheaper than a new compressor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRestores air flow:\u003c\/b\u003e fills the tank normally again.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDirect fit:\u003c\/b\u003e no adaptations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eKeep your unit:\u003c\/b\u003e motor, tank and pressure switch remain in service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing the damaged pump of the PRO100VC-3M.\u003c\/li\u003e\n\u003cli\u003eRestoring performance after wear.\u003c\/li\u003e\n\u003cli\u003eRepair after seizure or breakage.\u003c\/li\u003e\n\u003cli\u003eMaintenance in workshops using this compressor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e replacement compressor pump \/ unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with:\u003c\/b\u003e PRO100VC-3M belt-driven compressor\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompressor:\u003c\/b\u003e 100 L, 3 HP, 230 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrive:\u003c\/b\u003e belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLubrication:\u003c\/b\u003e oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e use the pump replacement as an opportunity to check the belt, intake filter and oil: that way the new pump starts in the best conditions. Do the first oil change after the initial running-in hours.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich compressor is it for?\u003c\/h3\u003e\n\u003cp\u003eFor the 100 L, 3 HP PRO100VC-3M belt-driven compressor.\u003c\/p\u003e\n\u003ch3\u003eDoes it need oil when fitting?\u003c\/h3\u003e\n\u003cp\u003eYes, check the level and use specific compressor oil before starting up.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for other compressors?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for the PRO100VC-3M; for other models, compare the pump and pulley before buying.\u003c\/p\u003e\n\u003ch3\u003eWhat else should I check when replacing it?\u003c\/h3\u003e\n\u003cp\u003eThe belt, intake filter, oil level and pulley alignment.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it myself?\u003c\/h3\u003e\n\u003cp\u003eWith mechanical experience, yes: disconnect the compressor and drain the tank before starting.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which compressor is it for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For the 100 L, 3 HP PRO100VC-3M belt-driven compressor.\"}},{\"@type\":\"Question\",\"name\":\"Does it need oil when fitting?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, check the level and use specific compressor oil before starting up.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for other compressors?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is intended for the PRO100VC-3M; for other models, compare the pump and pulley before buying.\"}},{\"@type\":\"Question\",\"name\":\"What else should I check when replacing it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The belt, intake filter, oil level and pulley alignment.\"}},{\"@type\":\"Question\",\"name\":\"Can I fit it myself?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"With mechanical experience, yes: disconnect the compressor and drain the tank before starting.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641394614619,"sku":"CEVIK-CA-PRO100VC-100","price":147.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"filtro-aire-comprimido-3-micras","title":"3 micron 15 bar compressed air particulate filter","description":"\u003cp\u003eThe first step towards clean air: this \u003cb\u003eindustrial in-line filter\u003c\/b\u003e traps dust and \u003cb\u003esolid and liquid particles down to 3 microns\u003c\/b\u003e, protecting refrigerated dryers, pneumatic tools, vacuum pumps and blowers.\u003c\/p\u003e\n\u003cp\u003eIt works up to \u003cb\u003e15 bar\u003c\/b\u003e and is available in four sizes from \u003cb\u003e570 to 3,500 L\/min\u003c\/b\u003e, with 1\/2\", 3\/4\" or 1\" thread depending on the flow rate. It is supplied with the \u003cb\u003efilter cartridge included\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003e3 micron filtration:\u003c\/b\u003e traps dust, rust and droplets before they reach the air network.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eProtects the dryer:\u003c\/b\u003e fitted upstream, it extends the life of the refrigerated dryer.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eUp to 15 bar:\u003c\/b\u003e suitable for piston and screw compressor installations.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eCartridge included:\u003c\/b\u003e delivered ready to install in the air line.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eFour flow rates:\u003c\/b\u003e from 570 to 3,500 L\/min for every compressor size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePre-filter upstream of the refrigerated dryer.\u003c\/li\u003e\n\u003cli\u003eAir installations in workshops, joinery shops and industry.\u003c\/li\u003e\n\u003cli\u003eProtecting pneumatic tools and automated machinery.\u003c\/li\u003e\n\u003cli\u003eVacuum pumps and blowers that need clean air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eFiltration grade:\u003c\/b\u003e 3 microns (dust and solid and liquid particles)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eModels:\u003c\/b\u003e 570 L\/min 1\/2\" · 1,300 L\/min 3\/4\" · 2,000 L\/min 3\/4\" · 3,500 L\/min 1\"\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eMaximum pressure:\u003c\/b\u003e 15 bar\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eReplacement cartridge:\u003c\/b\u003e PKC570 (570 L\/min) · PKC2000 (2,000 L\/min) · PKC3500 (3,500 L\/min)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eIncludes:\u003c\/b\u003e filter cartridge\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eWeight with packaging:\u003c\/b\u003e 1.2 kg (570) · 2 kg (2,000) · 3 kg (3,500)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e choose the filter by the \u003cb\u003ecompressor flow rate\u003c\/b\u003e, not by the pipe thread: an undersized filter causes a pressure drop. Replace the cartridge when you notice a loss of pressure at the outlet or at least once a year.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhere is the filter fitted?\u003c\/h3\u003e\n\u003cp\u003eAfter the air receiver and before the refrigerated dryer, so that the air reaches the dryer free of particles.\u003c\/p\u003e\n\u003ch3\u003eWhich size should I choose?\u003c\/h3\u003e\n\u003cp\u003eOne with a flow rate equal to or higher than your compressor: 570, 1,300, 2,000 or 3,500 L\/min.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with the cartridge?\u003c\/h3\u003e\n\u003cp\u003eYes, it is supplied with the filter cartridge included.\u003c\/p\u003e\n\u003ch3\u003eHow often should the cartridge be replaced?\u003c\/h3\u003e\n\u003cp\u003eWhen the pressure drop across the filter increases or, as a preventive measure, once a year.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure can it withstand?\u003c\/h3\u003e\n\u003cp\u003eUp to 15 bar.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Where is the filter fitted?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"After the air receiver and before the refrigerated dryer, so that the air reaches the dryer free of particles.\"}},{\"@type\":\"Question\",\"name\":\"Which size should I choose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"One with a flow rate equal to or higher than your compressor: 570, 1,300, 2,000 or 3,500 L\/min.\"}},{\"@type\":\"Question\",\"name\":\"Does it come with the cartridge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, it is supplied with the filter cartridge included.\"}},{\"@type\":\"Question\",\"name\":\"How often should the cartridge be replaced?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"When the pressure drop across the filter increases or, as a preventive measure, once a year.\"}},{\"@type\":\"Question\",\"name\":\"What pressure can it withstand?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Up to 15 bar.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"570 L\/min · 1\/2\"","offer_id":54641394778459,"sku":"CEVIK-CA-PKF570","price":127.4,"currency_code":"EUR","in_stock":true},{"title":"1,300 L\/min · 3\/4\"","offer_id":54641394811227,"sku":"CEVIK-CA-PKF1300","price":147.0,"currency_code":"EUR","in_stock":true},{"title":"2,000 L\/min · 3\/4\"","offer_id":54641394843995,"sku":"CEVIK-CA-PKF2000","price":166.6,"currency_code":"EUR","in_stock":true},{"title":"3,500 L\/min · 1\"","offer_id":54641394876763,"sku":"CEVIK-CA-PKF3500","price":205.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/filtro-aire-comprimido-3-micras-vica-work-1.jpg?v=1793863780"},{"product_id":"cabezal-compresor-alto-rendimiento-k","title":"High-performance compressor pump for belt-driven units","description":"\u003cp\u003eWhen the pump of a belt-driven compressor loses performance, the unit takes longer and longer to fill and can't keep up. Before replacing the whole compressor, replace just its heart: these \u003cb\u003eK17, K30 and K50 high-performance pumps\u003c\/b\u003e restore your compressor's \u003cb\u003eworking air flow\u003c\/b\u003e for a fraction of the cost.\u003c\/p\u003e\n\u003cp\u003eChoose the model to suit the power of your unit: \u003cb\u003e3 HP K17\u003c\/b\u003e high-performance, \u003cb\u003eK30\u003c\/b\u003e for \u003cb\u003e7.5 HP\u003c\/b\u003e compressors and K30 models, or \u003cb\u003eK50\u003c\/b\u003e for \u003cb\u003e10 HP\u003c\/b\u003e compressors. They are lubricated compressor pumps for \u003cb\u003ebelt-driven\u003c\/b\u003e compressors.\u003c\/p\u003e\n\u003cp\u003eA spare part designed for workshops and industries that depend on compressed air and cannot afford to have the compressor out of action.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRestores air flow:\u003c\/b\u003e your compressor performs like new again.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSavings compared with a new unit:\u003c\/b\u003e you only replace the compressor pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThree models:\u003c\/b\u003e K17 (3 HP), K30 (7.5 HP) and K50 (10 HP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh performance:\u003c\/b\u003e designed for heavy-duty use in workshops and industry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFor belt-driven compressors:\u003c\/b\u003e you keep the motor, tank and the rest of the unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing a damaged or worn pump.\u003c\/li\u003e\n\u003cli\u003eRestoring air flow on belt-driven compressors.\u003c\/li\u003e\n\u003cli\u003eMaintenance of workshop and industrial compressors.\u003c\/li\u003e\n\u003cli\u003eRepair after seizure or breakage of the pump.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e replacement compressor pump \/ unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eK17:\u003c\/b\u003e 3 HP, high performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eK30:\u003c\/b\u003e for 7.5 HP compressors and K30 models\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eK50:\u003c\/b\u003e for 10 HP compressors\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrive:\u003c\/b\u003e belt\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLubrication:\u003c\/b\u003e oil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e before ordering, check the pump model fitted to your compressor (usually on the rating plate or stamped on the pump) and the pulley: that way you fit the exact replacement. Take the opportunity to replace the belt and the intake filter.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know which pump I need?\u003c\/h3\u003e\n\u003cp\u003eLook at the model stamped on the current pump or on your compressor's rating plate and choose the same one: K17, K30 or K50.\u003c\/p\u003e\n\u003ch3\u003eIs it supplied with oil?\u003c\/h3\u003e\n\u003cp\u003eAlways check the level and fill with compressor oil before first start-up.\u003c\/p\u003e\n\u003ch3\u003eIs it a spare part for belt-driven compressors?\u003c\/h3\u003e\n\u003cp\u003eYes, they are pumps for 3, 7.5 and 10 HP belt-driven compressors.\u003c\/p\u003e\n\u003ch3\u003eWhat should I check when replacing it?\u003c\/h3\u003e\n\u003cp\u003eThe belt, pulley alignment, intake filter and safety valve.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it myself?\u003c\/h3\u003e\n\u003cp\u003eIf you have mechanical experience, yes; disconnect the compressor and drain the tank before starting. If in doubt, go to a service centre.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How do I know which pump I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Look at the model stamped on the current pump or on your compressor's rating plate and choose the same one: K17, K30 or K50.\"}},{\"@type\":\"Question\",\"name\":\"Is it supplied with oil?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Always check the level and fill with compressor oil before first start-up.\"}},{\"@type\":\"Question\",\"name\":\"Is it a spare part for belt-driven compressors?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, they are pumps for 3, 7.5 and 10 HP belt-driven compressors.\"}},{\"@type\":\"Question\",\"name\":\"What should I check when replacing it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The belt, pulley alignment, intake filter and safety valve.\"}},{\"@type\":\"Question\",\"name\":\"Can I fit it myself?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"If you have mechanical experience, yes; disconnect the compressor and drain the tank before starting. If in doubt, go to a service centre.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"K17 · 3 HP","offer_id":54641395204443,"sku":"CEVIK-CASD0000B","price":352.8,"currency_code":"EUR","in_stock":true},{"title":"K30 · 7.5 HP","offer_id":54641395237211,"sku":"CEVIK-CA-SL0000A","price":861.42,"currency_code":"EUR","in_stock":true},{"title":"K50 · 10 HP","offer_id":54641395269979,"sku":"CEVIK-CA-SM0000A","price":1127.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"cabezal-silencioso-ap-compresor","title":"Replacement AP silent compressor pump","description":"\u003cp\u003eA silent compressor is only as good as its pump. If yours has started making noise, is slow to fill or has broken down, this \u003cb\u003ereplacement AP silent pump\u003c\/b\u003e lets you \u003cb\u003erestore the compressor to full performance\u003c\/b\u003e without buying a new one, keeping the tank, pressure switch and the rest of the unit.\u003c\/p\u003e\n\u003cp\u003eIt is a \u003cb\u003esilent compressor pump unit\u003c\/b\u003e available in two power ratings: \u003cb\u003e1 HP AP400\u003c\/b\u003e and \u003cb\u003e1.5 HP AP750\u003c\/b\u003e. Simply check the model stamped on your current pump and choose the same one.\u003c\/p\u003e\n\u003cp\u003eIt is the most sensible repair when the rest of the compressor is in good condition: the tank, pressure switch and connections are still serviceable and you only replace the part that has worn.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSilence is back:\u003c\/b\u003e restores the unit's quiet operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo power ratings:\u003c\/b\u003e AP400 (1 HP) and AP750 (1.5 HP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSavings:\u003c\/b\u003e much cheaper than a new compressor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eKeep your unit:\u003c\/b\u003e tank, pressure switch and connections stay in use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSimple fitting:\u003c\/b\u003e for users with mechanical experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing the damaged pump in silent compressors.\u003c\/li\u003e\n\u003cli\u003eRestoring air flow after wear.\u003c\/li\u003e\n\u003cli\u003eRepairing compressors that won't start due to a pump fault.\u003c\/li\u003e\n\u003cli\u003eMaintenance in workshops, clinics and laboratories with a silent compressor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e replacement silent pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModels:\u003c\/b\u003e AP400 (1 HP) · AP750 (1.5 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUse:\u003c\/b\u003e silent compressors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e check that the model stamped on your current pump matches (AP400 or AP750) before making the change. Disconnect the compressor and drain the tank before dismantling anything, and check the intake filter when fitting the new pump.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich model do I need?\u003c\/h3\u003e\n\u003cp\u003eThe same one your compressor has: AP400 if it is 1 HP or AP750 if it is 1.5 HP.\u003c\/p\u003e\n\u003ch3\u003eIs it for silent compressors?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a silent pump for compressors of this type.\u003c\/p\u003e\n\u003ch3\u003eWhere can I find my pump's model?\u003c\/h3\u003e\n\u003cp\u003eIt is usually stamped on the pump itself or shown on the compressor's rating plate.\u003c\/p\u003e\n\u003ch3\u003eCan I fit it myself?\u003c\/h3\u003e\n\u003cp\u003eIf you have mechanical and electrical experience, yes. Disconnect the compressor and drain the tank first. If in doubt, go to a service centre.\u003c\/p\u003e\n\u003ch3\u003eIs it worth replacing just the pump?\u003c\/h3\u003e\n\u003cp\u003eYes, if the tank and the rest of the unit are in good condition: it costs much less than a new compressor.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which model do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The same one your compressor has: AP400 if it is 1 HP or AP750 if it is 1.5 HP.\"}},{\"@type\":\"Question\",\"name\":\"Is it for silent compressors?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, it is a silent pump for compressors of this type.\"}},{\"@type\":\"Question\",\"name\":\"Where can I find my pump's model?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is usually stamped on the pump itself or shown on the compressor's rating plate.\"}},{\"@type\":\"Question\",\"name\":\"Can I fit it myself?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"If you have mechanical and electrical experience, yes. Disconnect the compressor and drain the tank first. If in doubt, go to a service centre.\"}},{\"@type\":\"Question\",\"name\":\"Is it worth replacing just the pump?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, if the tank and the rest of the unit are in good condition: it costs much less than a new compressor.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"AP400 · 1 HP","offer_id":54641395532123,"sku":"CEVIK-CA-AP400","price":100.94,"currency_code":"EUR","in_stock":true},{"title":"AP750 · 1.5 HP","offer_id":54641395564891,"sku":"CEVIK-CA-AP750","price":112.7,"currency_code":"EUR","in_stock":true}]},{"product_id":"calderin-vertical-aire-comprimido","title":"Vertical compressed air receiver 11 bar with pressure gauge and valve","description":"\u003cp\u003e\u003cstrong\u003eThe lungs of your air installation: more reserve, fewer starts and a compressor that lasts longer.\u003c\/strong\u003e The air receiver stores air, absorbs demand peaks and reduces compressor starts. These vertical receivers of 270, 500, 720 and 900 litres take up little floor space and are designed for workshops and industry.\u003c\/p\u003e\u003cp\u003eThey have an epoxy powder coat finish applied at 200 °C, resistant to corrosion and wear, and come equipped with a safety valve, pressure gauge, air outlet valve and drain valve; they also accept an automatic condensate drain (optional).\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore air reserve:\u003c\/strong\u003e covers demand peaks and the compressor starts less often.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical format:\u003c\/strong\u003e large capacity in a small footprint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully equipped:\u003c\/strong\u003e safety valve, pressure gauge, outlet valve and drain valve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEpoxy paint applied at 200 °C:\u003c\/strong\u003e long-lasting protection against corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccepts an automatic drain:\u003c\/strong\u003e so you can forget about draining by hand (optional).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIncreasing the capacity of a screw or piston compressor.\u003c\/li\u003e\n\u003cli\u003eCreating a buffer close to the points of highest consumption.\u003c\/li\u003e\n\u003cli\u003eCompressed air installations in workshops and industrial units.\u003c\/li\u003e\n\u003cli\u003eReducing how often the compressor starts and extending its life.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacities:\u003c\/strong\u003e 270 · 500 · 720 · 900 litres\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 11 bar (recommended working pressure up to 10 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 3\/4\" BSP (270, 500 and 720 L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 270 L: 158 x 53 x 53 cm · 500 L: Ø 660 x 2,160 mm · 720 L: 210 x 80 x 80 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquipment:\u003c\/strong\u003e safety valve, pressure gauge, air outlet valve and drain valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional:\u003c\/strong\u003e automatic condensate drain valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e epoxy powder coating applied at 200 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacked weight:\u003c\/strong\u003e 90 · 125 · 202 · 190 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eAs a rule of thumb, the receiver should hold at least one third of the compressor's flow rate in litres per minute (a 1,500 L\/min compressor needs 500 L or more). Drain it daily or fit an automatic drain, and check the safety valve at least once a year.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat receiver capacity do I need?\u003c\/h3\u003e\u003cp\u003eAs a guide, a volume in litres equal to one third of the compressor's flow rate in L\/min or more. If there are heavy demand peaks, it is worth going up a size.\u003c\/p\u003e\u003ch3\u003eWhat pressure does it work at?\u003c\/h3\u003e\u003cp\u003eIt is rated at 11 bar; a working pressure of no more than 10 bar is recommended.\u003c\/p\u003e\u003ch3\u003eWhat is included?\u003c\/h3\u003e\u003cp\u003eSafety valve, pressure gauge, air outlet valve and drain valve. The automatic drain is optional.\u003c\/p\u003e\u003ch3\u003eHow often should it be drained?\u003c\/h3\u003e\u003cp\u003eIdeally every day, or fit an automatic drain that expels the water without any intervention.\u003c\/p\u003e\u003ch3\u003eWhat maintenance does it need?\u003c\/h3\u003e\u003cp\u003eDrain the condensate, check the safety valve and the pressure gauge, and touch up the epoxy paint if it deteriorates.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What receiver capacity do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"As a guide, a volume in litres equal to one third of the compressor's flow rate in L\/min or more. If there are heavy demand peaks, it is worth going up a size.\"}},{\"@type\":\"Question\",\"name\":\"What pressure does it work at?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is rated at 11 bar; a working pressure of no more than 10 bar is recommended.\"}},{\"@type\":\"Question\",\"name\":\"What is included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Safety valve, pressure gauge, air outlet valve and drain valve. The automatic drain is optional.\"}},{\"@type\":\"Question\",\"name\":\"How often should it be drained?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Ideally every day, or fit an automatic drain that expels the water without any intervention.\"}},{\"@type\":\"Question\",\"name\":\"What maintenance does it need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Drain the condensate, check the safety valve and the pressure gauge, and touch up the epoxy paint if it deteriorates.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"270 L","offer_id":54641395859803,"sku":"CEVIK-CA-LT270CE","price":577.22,"currency_code":"EUR","in_stock":true},{"title":"500 L","offer_id":54641395892571,"sku":"CEVIK-CA-LT500CE","price":881.02,"currency_code":"EUR","in_stock":true},{"title":"720 L","offer_id":54641395925339,"sku":"CEVIK-CA-LT720CE","price":1175.02,"currency_code":"EUR","in_stock":true},{"title":"900 L","offer_id":54641395958107,"sku":"CEVIK-CA-LT900CE","price":1469.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/calderin-vertical-aire-comprimido-vica-work-1.jpg?v=1793863826"},{"product_id":"secador-frigorifico-aire-comprimido","title":"Refrigerated compressed air dryer with digital display","description":"\u003cp\u003eThe air leaving the compressor is laden with moisture, and that water ends up in pipework, tools and paint finishes. A \u003cb\u003erefrigerated dryer\u003c\/b\u003e cools the air to condense the water and expels it, so that \u003cb\u003edry air\u003c\/b\u003e reaches the network, with a dew point of \u003cb\u003eclass 5 according to ISO 8573-1\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eRange from \u003cb\u003e700 to 6,100 L\/min\u003c\/b\u003e at 230 V, with \u003cb\u003edigital display\u003c\/b\u003e and \u003cb\u003eelectronic control with dual temperature probe\u003c\/b\u003e that regulates the dew point and condensing pressure. Its heat exchanger is designed for maximum performance with minimum pressure drop, and it is built with eco-friendly refrigerants and recyclable materials.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eDry air:\u003c\/b\u003e removes water from compressed air and protects tools and installation.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eElectronic control:\u003c\/b\u003e dual temperature probe for a stable dew point.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eMinimum pressure drop:\u003c\/b\u003e high-performance heat exchanger that does not penalise the network.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eDigital display:\u003c\/b\u003e operating status and dew point in plain view.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e230 V across the range:\u003c\/b\u003e plugs into a single-phase outlet, even the large models.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eEight sizes:\u003c\/b\u003e from 700 to 6,100 L\/min to match your compressor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBody and paint shops that need water-free air.\u003c\/li\u003e\n\u003cli\u003eInstallations with high-flow screw or piston compressors.\u003c\/li\u003e\n\u003cli\u003eProtecting pneumatic tools, solenoid valves and machinery.\u003c\/li\u003e\n\u003cli\u003eFood industry, joinery and processes requiring quality air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eModels (flow rate):\u003c\/b\u003e 700 · 1,000 · 1,500 · 2,000 · 2,500 · 3,200 · 4,000 · 6,100 L\/min\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eFlow rate in m³\/h:\u003c\/b\u003e 42 · 60 · 90 · 120 · 150 · 192 · 240 · 366\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eVoltage:\u003c\/b\u003e 230 V \/ 50 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eDew point:\u003c\/b\u003e class 5 according to ISO 8573-1\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eReference conditions:\u003c\/b\u003e ISO 7183: 25 ºC ambient, 7 bar inlet\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eControl:\u003c\/b\u003e electronic with dual temperature probe and digital display\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eWeight with packaging:\u003c\/b\u003e 18 · 18 · 21 · 21 · 27 · 35 · 41 · 72 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e choose a dryer with a flow rate \u003cb\u003eequal to or higher than the compressor's\u003c\/b\u003e (not the tools') and fit it after the air receiver, with a particulate filter upstream. Place it in a cool, ventilated location: in high ambient temperatures the dryer loses capacity.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size dryer do I need?\u003c\/h3\u003e\n\u003cp\u003eOne matching your compressor flow rate or slightly higher. If the compressor delivers 1,050 L\/min, choose the 1,500 L\/min model; if it delivers 700 L\/min, the 700 or 1,000 L\/min model.\u003c\/p\u003e\n\u003ch3\u003eWhere is it installed?\u003c\/h3\u003e\n\u003cp\u003eAfter the compressor and air receiver, before the distribution network. It is advisable to fit one filter upstream and another downstream.\u003c\/p\u003e\n\u003ch3\u003eWhat power supply does it need?\u003c\/h3\u003e\n\u003cp\u003eAll models run on 230 V \/ 50 Hz.\u003c\/p\u003e\n\u003ch3\u003eWhat does ISO 8573-1 class 5 mean?\u003c\/h3\u003e\n\u003cp\u003eIt is the air quality class for humidity according to the ISO 8573-1 standard; it corresponds to a pressure dew point of +7 ºC, suitable for most workshop and industrial uses.\u003c\/p\u003e\n\u003ch3\u003eDoes it need maintenance?\u003c\/h3\u003e\n\u003cp\u003eClean the dust off the condenser, check that the condensate drain is working and check on the display that the dew point is correct.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What size dryer do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"One matching your compressor flow rate or slightly higher. If the compressor delivers 1,050 L\/min, choose the 1,500 L\/min model; if it delivers 700 L\/min, the 700 or 1,000 L\/min model.\"}},{\"@type\":\"Question\",\"name\":\"Where is it installed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"After the compressor and air receiver, before the distribution network. It is advisable to fit one filter upstream and another downstream.\"}},{\"@type\":\"Question\",\"name\":\"What power supply does it need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"All models run on 230 V \/ 50 Hz.\"}},{\"@type\":\"Question\",\"name\":\"What does ISO 8573-1 class 5 mean?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is the air quality class for humidity according to the ISO 8573-1 standard; it corresponds to a pressure dew point of +7 ºC, suitable for most workshop and industrial uses.\"}},{\"@type\":\"Question\",\"name\":\"Does it need maintenance?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Clean the dust off the condenser, check that the condensate drain is working and check on the display that the dew point is correct.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"700 L\/min","offer_id":54641397268827,"sku":"CEVIK-CA-DRY700PRO","price":881.02,"currency_code":"EUR","in_stock":true},{"title":"1,000 L\/min","offer_id":54641397301595,"sku":"CEVIK-CA-DRY1000PRO","price":979.02,"currency_code":"EUR","in_stock":true},{"title":"1,500 L\/min","offer_id":54641397334363,"sku":"CEVIK-CA-DRY1500PRO","price":1029.0,"currency_code":"EUR","in_stock":true},{"title":"2,000 L\/min","offer_id":54641397367131,"sku":"CEVIK-CA-DRY2000PRO","price":1077.02,"currency_code":"EUR","in_stock":true},{"title":"2,500 L\/min","offer_id":54641397399899,"sku":"CEVIK-CA-DRY2500PRO","price":1225.0,"currency_code":"EUR","in_stock":true},{"title":"3,200 L\/min","offer_id":54641397432667,"sku":"CEVIK-CA-DRY3200PRO","price":1764.0,"currency_code":"EUR","in_stock":true},{"title":"4,000 L\/min","offer_id":54641397465435,"sku":"CEVIK-CA-DRY4000PRO","price":1862.0,"currency_code":"EUR","in_stock":true},{"title":"6,100 L\/min","offer_id":54641397498203,"sku":"CEVIK-CA-DRY6100PRO","price":3332.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/secador-frigorifico-aire-comprimido-vica-work-1.jpg?v=1793863883"},{"product_id":"separador-aceite-agua-condensados","title":"3,000 L\/min oil-water separator for compressor condensate","description":"\u003cp\u003eThe water drained from compressors, air receivers, dryers and filters carries oil and must not go straight down the drain. This \u003cb\u003eEW30 oil-water separator\u003c\/b\u003e treats the condensate from installations of up to \u003cb\u003e3,000 L\/min (180 m³\/h)\u003c\/b\u003e of compressed air and separates out \u003cb\u003emineral and synthetic oils\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eIts \u003cb\u003emulti-stage twin-tower\u003c\/b\u003e design combines a \u003cb\u003epolypropylene fibre\u003c\/b\u003e element and an \u003cb\u003eactivated carbon\u003c\/b\u003e element, reducing the residual oil in the water well below the usual discharge limits. It is compact, lightweight and easy to maintain.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eTwin tower:\u003c\/b\u003e polypropylene for free oil and activated carbon for residual oil.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eMineral and synthetic oils:\u003c\/b\u003e suitable for the usual screw compressor lubricants.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eCompatible with all drains:\u003c\/b\u003e float, timed and capacitive.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eCompact and light:\u003c\/b\u003e easy to install next to the compressor and to maintain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInstallations with oil-lubricated screw compressors.\u003c\/li\u003e\n\u003cli\u003eCollecting the drains from the compressor, air receiver, dryer and filters.\u003c\/li\u003e\n\u003cli\u003eMeeting the company's water discharge requirements.\u003c\/li\u003e\n\u003cli\u003eCompressor rooms in workshops and industry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eModel:\u003c\/b\u003e EW30\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eInstallation air flow:\u003c\/b\u003e up to 3,000 L\/min (180 m³\/h · 106 CFM)\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eTreatment:\u003c\/b\u003e two towers: polypropylene fibre + activated carbon\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eOils:\u003c\/b\u003e mineral and synthetic\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eCompatible drains:\u003c\/b\u003e float, timed and capacitive\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eApplication:\u003c\/b\u003e screw compressor condensate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e size the separator for the \u003cb\u003etotal air flow\u003c\/b\u003e of the installation, not for a single compressor, and route all drains to it. Replace the filter elements when the outlet water no longer looks clean.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is an oil-water separator for?\u003c\/h3\u003e\n\u003cp\u003eTo treat the condensate drained from the compressed air installation, separating the oil from the water before it is discharged.\u003c\/p\u003e\n\u003ch3\u003eUp to what installation size is it suitable?\u003c\/h3\u003e\n\u003cp\u003eFor installations of up to 3,000 L\/min (180 m³\/h) of compressed air.\u003c\/p\u003e\n\u003ch3\u003eDoes it work with any drain?\u003c\/h3\u003e\n\u003cp\u003eYes, it is compatible with float, timed and capacitive drains.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for synthetic oil?\u003c\/h3\u003e\n\u003cp\u003eYes, it separates mineral and synthetic oils.\u003c\/p\u003e\n\u003ch3\u003eWhat maintenance does it need?\u003c\/h3\u003e\n\u003cp\u003eReplace the polypropylene and activated carbon elements when they become saturated; its compact design makes this easy.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is an oil-water separator for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"To treat the condensate drained from the compressed air installation, separating the oil from the water before it is discharged.\"}},{\"@type\":\"Question\",\"name\":\"Up to what installation size is it suitable?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For installations of up to 3,000 L\/min (180 m³\/h) of compressed air.\"}},{\"@type\":\"Question\",\"name\":\"Does it work with any drain?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, it is compatible with float, timed and capacitive drains.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for synthetic oil?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, it separates mineral and synthetic oils.\"}},{\"@type\":\"Question\",\"name\":\"What maintenance does it need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Replace the polypropylene and activated carbon elements when they become saturated; its compact design makes this easy.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641398186331,"sku":"CEVIK-CA-8193409","price":465.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/separador-aceite-agua-condensados-vica-work-1.jpg?v=1793863917"},{"product_id":"kit-mantenimiento-compresor-tornillo-michelin","title":"Maintenance kit for Michelin screw compressors","description":"\u003cp\u003e\u003cb\u003ePreventive maintenance\u003c\/b\u003e kits for \u003cb\u003eMichelin (MC, RSX and RSX Silver ranges)\u003c\/b\u003e and FIAC screw compressors from 3 to 20 HP, grouped by service interval: \u003cb\u003e2,000 hours\u003c\/b\u003e (or every year), \u003cb\u003e4,000 hours\u003c\/b\u003e (or every two years) and \u003cb\u003e6,000 hours\u003c\/b\u003e (or every three years), whichever comes first.\u003c\/p\u003e\n\u003cp\u003eChoose the kit according to your compressor's hours and power. As a general rule, the 2,000 h kit includes an \u003cb\u003eoil filter and air filter\u003c\/b\u003e; the 4,000 h kit adds the \u003cb\u003eoil separator\u003c\/b\u003e; and the 6,000 h kits also include \u003cb\u003evalve\u003c\/b\u003e kits (minimum pressure, thermostatic and\/or intake, depending on model). Always check the kit reference in your unit's manual.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAll in one kit:\u003c\/b\u003e the parts for each service grouped together, with no need to look up individual references.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBy interval:\u003c\/b\u003e 2,000, 4,000 and 6,000-hour kits according to the maintenance schedule.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBy range and power:\u003c\/b\u003e MC, RSX and RSX Silver from 3 to 20 HP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProtects the airend:\u003c\/b\u003e filters and separator in good condition keep temperature and oil consumption under control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePreventive maintenance of Michelin and FIAC screw compressors.\u003c\/li\u003e\n\u003cli\u003eService centres and compressor room maintenance providers.\u003c\/li\u003e\n\u003cli\u003eCompanies that carry out maintenance with their own trained staff.\u003c\/li\u003e\n\u003cli\u003eAnnual, two-yearly and three-yearly services depending on hours of use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e2,000 h kits:\u003c\/b\u003e oil filter and air filter\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e4,000 h kits:\u003c\/b\u003e oil and air filters and oil separator\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e6,000 h 3-5.5 HP RSX Silver and 7.5-10 HP RSX Silver:\u003c\/b\u003e oil filter, air filter, thermostatic valve kit, minimum pressure valve kit and intake valve kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e6,000 h 4-10 HP MC:\u003c\/b\u003e oil filter, air filter, minimum pressure valve kit, thermostatic valve and intake valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e6,000 h 15-20 HP RSX:\u003c\/b\u003e oil filter, air filter, separator, minimum pressure valve kit and MPV mounting block kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible airends listed:\u003c\/b\u003e C43I (3-10 HP) · C55I \/ C40-C55 (15-20 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompressor type:\u003c\/b\u003e lubricated screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e record the hours of each service on the compressor itself. A clogged air filter or an exhausted separator won't stop the machine, but they push up temperature and oil consumption: replacing them on time is far cheaper than an airend repair.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich kit do I need?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the working hours and the power of your compressor. Check the hour meter and the rating plate, and choose the interval (2,000, 4,000 or 6,000 h) and the corresponding power range.\u003c\/p\u003e\n\u003ch3\u003eIf my compressor runs few hours, when should I service it?\u003c\/h3\u003e\n\u003cp\u003eBy time: the 2,000 h kit every year, the 4,000 h kit every two years and the 6,000 h kit every three years, whichever comes first.\u003c\/p\u003e\n\u003ch3\u003eIs the oil included?\u003c\/h3\u003e\n\u003cp\u003eNo. The kits include filters, separator and valves depending on the model; the oil is purchased separately.\u003c\/p\u003e\n\u003ch3\u003eWho should carry out the maintenance?\u003c\/h3\u003e\n\u003cp\u003eTrained maintenance staff, following the compressor manufacturer's manual and with the machine stopped, depressurised and disconnected.\u003c\/p\u003e\n\u003ch3\u003eWhat else should be checked at each service?\u003c\/h3\u003e\n\u003cp\u003eThe oil level, the condition of the air filter and a visual inspection of hoses, seals and components.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which kit do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It depends on the working hours and the power of your compressor. Check the hour meter and the rating plate, and choose the interval (2,000, 4,000 or 6,000 h) and the corresponding power range.\"}},{\"@type\":\"Question\",\"name\":\"If my compressor runs few hours, when should I service it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"By time: the 2,000 h kit every year, the 4,000 h kit every two years and the 6,000 h kit every three years, whichever comes first.\"}},{\"@type\":\"Question\",\"name\":\"Is the oil included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. The kits include filters, separator and valves depending on the model; the oil is purchased separately.\"}},{\"@type\":\"Question\",\"name\":\"Who should carry out the maintenance?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Trained maintenance staff, following the compressor manufacturer's manual and with the machine stopped, depressurised and disconnected.\"}},{\"@type\":\"Question\",\"name\":\"What else should be checked at each service?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The oil level, the condition of the air filter and a visual inspection of hoses, seals and components.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"2,000 h · 3-10 HP MC\/RSX","offer_id":54641399529819,"sku":"CEVIK-CA2901370003","price":64.96,"currency_code":"EUR","in_stock":true},{"title":"2,000 h · 7.5-10 HP RSX Silver","offer_id":54641399562587,"sku":"CEVIK-CA2901370006","price":82.58,"currency_code":"EUR","in_stock":true},{"title":"2,000 h · 10-15-20 HP","offer_id":54641399595355,"sku":"CEVIK-CA2901370000","price":93.59,"currency_code":"EUR","in_stock":true},{"title":"4,000 h · 3-6 HP RSX\/MC","offer_id":54641399628123,"sku":"CEVIK-CA2901370004","price":208.09,"currency_code":"EUR","in_stock":true},{"title":"4,000 h · 7.5-10 HP RSX Silver","offer_id":54641399660891,"sku":"CEVIK-CA2901370007","price":230.12,"currency_code":"EUR","in_stock":true},{"title":"4,000 h · 8-10 HP MC","offer_id":54641399693659,"sku":"CEVIK-CA2901370010","price":263.15,"currency_code":"EUR","in_stock":true},{"title":"4,000 h · 10-15-20 HP","offer_id":54641399726427,"sku":"CEVIK-CA2901370001","price":241.13,"currency_code":"EUR","in_stock":true},{"title":"6,000 h · 3-5.5 HP RSX Silver","offer_id":54641399759195,"sku":"CEVIK-CA2901370005","price":516.38,"currency_code":"EUR","in_stock":true},{"title":"6,000 h · 4-10 HP MC","offer_id":54641399791963,"sku":"CEVIK-CA2901370011","price":637.5,"currency_code":"EUR","in_stock":true},{"title":"6,000 h · 7.5-10 HP RSX Silver","offer_id":54641399824731,"sku":"CEVIK-CA2901370008","price":659.52,"currency_code":"EUR","in_stock":true},{"title":"6,000 h · 15-20 HP RSX","offer_id":54641399857499,"sku":"CEVIK-CA2901370002","price":692.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/kit-mantenimiento-compresor-tornillo-michelin-vica-work-1.jpg?v=1793864001"},{"product_id":"kit-accesorios-compresor-8-piezas-michelin","title":"Compressor accessory kit, 8 pieces","description":"\u003cp\u003e\u003cstrong\u003eStart working with your compressor from day one with a Michelin accessory kit.\u003c\/strong\u003e A compressor without accessories is just an air tank. This kit of 8 Michelin air compressor accessories gives you the basics so you have everything to hand and can start making the most of it at home, in the garage or in the workshop, without having to buy item by item.\u003c\/p\u003e\u003cp\u003eMichelin is a benchmark brand in compressed air accessories, and buying accessories as a kit is the most practical and economical way to equip a new compressor or replace the worn accessories of one you already own. Everything stays together and organised, ready for the next job.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 pieces in one kit:\u003c\/strong\u003e the basics for using your compressor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMichelin brand:\u003c\/strong\u003e accessories from a well-known brand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSavings:\u003c\/strong\u003e cheaper than buying each accessory separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEverything to hand:\u003c\/strong\u003e ready to get started from day one.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEquipping a new compressor for home or workshop use.\u003c\/li\u003e\n\u003cli\u003eReplacing your compressor's worn accessories.\u003c\/li\u003e\n\u003cli\u003eEveryday garage and workshop tasks with compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michelin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e 8 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e air compressor accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e CAKITMICHELIN8\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eCheck that your compressor's fitting matches that of the accessories; if not, an adaptor will solve it. If your compressor has a universal coupler, standardise all connections on that profile so any tool fits any hose.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow many pieces are included?\u003c\/h3\u003e\u003cp\u003e8 air compressor accessory pieces.\u003c\/p\u003e\u003ch3\u003eIs it compatible with my compressor?\u003c\/h3\u003e\u003cp\u003eWith compressors that use the same type of quick coupler; check the fitting on your machine.\u003c\/p\u003e\u003ch3\u003eWhat if my compressor's fitting is different?\u003c\/h3\u003e\u003cp\u003eYou can adapt it with a quick connector or coupler of the right profile. Contact us if you have any questions.\u003c\/p\u003e\u003ch3\u003eWhat brand is it?\u003c\/h3\u003e\u003cp\u003eIt is an accessory kit from the Michelin brand.\u003c\/p\u003e\u003ch3\u003eWhat kind of user is it for?\u003c\/h3\u003e\u003cp\u003eFor anyone who wants to have the compressor basics to hand, whether at home and in the garage or in the workshop.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How many pieces are included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"8 air compressor accessory pieces.\"}},{\"@type\":\"Question\",\"name\":\"Is it compatible with my compressor?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"With compressors that use the same type of quick coupler; check the fitting on your machine.\"}},{\"@type\":\"Question\",\"name\":\"What if my compressor's fitting is different?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"You can adapt it with a quick connector or coupler of the right profile. Contact us if you have any questions.\"}},{\"@type\":\"Question\",\"name\":\"What brand is it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is an accessory kit from the Michelin brand.\"}},{\"@type\":\"Question\",\"name\":\"What kind of user is it for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For anyone who wants to have the compressor basics to hand, whether at home and in the garage or in the workshop.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Kit · 8 pieces","offer_id":54641414111579,"sku":"CEVIK-CAKITMICHELIN8","price":38.22,"currency_code":"EUR","in_stock":true}]},{"product_id":"enrollador-manguera-aire-9-m-michelin","title":"Air hose reel 9 m Ø 8 mm","description":"\u003cp\u003e\u003cstrong\u003eYour air hose always ready, with no kinks and no tripping.\u003c\/strong\u003e Coiling the hose by hand after every job is tedious, and leaving it on the floor ends up with it being trodden on, cut, kinked and causing accidents. This Michelin 9-metre, 8 mm diameter hose reel keeps the hose coiled and tidy, prevents tangles, trips and damage, and extends the life of the hose in workshops and garages.\u003c\/p\u003e\u003cp\u003eIts 9 metres comfortably cover a garage or workstation, and the 8 mm diameter is the standard for blowing, tyre inflation, painting and nailers, making it a practical accessory for any compressor for home or light professional use.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant tidiness:\u003c\/strong\u003e the hose is coiled away after every use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9-metre reach:\u003c\/strong\u003e enough to move around the garage or workshop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eØ 8 mm:\u003c\/strong\u003e the most versatile diameter for general-purpose tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMichelin brand:\u003c\/strong\u003e a benchmark in compressed air accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHome garages and workshops with a compressor.\u003c\/li\u003e\n\u003cli\u003eTyre inflation, blowing and cleaning with air.\u003c\/li\u003e\n\u003cli\u003eWorkstations where the hose is used every day.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Michelin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 9 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e compressed air\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eInstall the reel close to the compressor outlet and guide the hose as it retracts: that way it does not slam at the end of its travel and lasts much longer. Fit a universal quick connector to the end so you can change tools instantly.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow long is it?\u003c\/h3\u003e\u003cp\u003e9 metres with an 8 mm diameter.\u003c\/p\u003e\u003ch3\u003eWhat is it used for?\u003c\/h3\u003e\u003cp\u003eFor storing your compressed air hose and keeping it tidy at all times.\u003c\/p\u003e\u003ch3\u003eWhich tools can I use with 8 mm?\u003c\/h3\u003e\u003cp\u003eGeneral-purpose tools: blow guns, tyre inflators, spray guns and nailers. For powerful impact wrenches, a larger diameter is better.\u003c\/p\u003e\u003ch3\u003eWhere should I install it?\u003c\/h3\u003e\u003cp\u003eIdeally close to the compressor outlet or the air outlet, in a convenient spot protected from knocks.\u003c\/p\u003e\u003ch3\u003eWhat connection do I need on the end?\u003c\/h3\u003e\u003cp\u003eThe most practical option is a universal-profile quick connector or coupler, compatible with most tools.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How long is it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"9 metres with an 8 mm diameter.\"}},{\"@type\":\"Question\",\"name\":\"What is it used for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For storing your compressed air hose and keeping it tidy at all times.\"}},{\"@type\":\"Question\",\"name\":\"Which tools can I use with 8 mm?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"General-purpose tools: blow guns, tyre inflators, spray guns and nailers. For powerful impact wrenches, a larger diameter is better.\"}},{\"@type\":\"Question\",\"name\":\"Where should I install it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Ideally close to the compressor outlet or the air outlet, in a convenient spot protected from knocks.\"}},{\"@type\":\"Question\",\"name\":\"What connection do I need on the end?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The most practical option is a universal-profile quick connector or coupler, compatible with most tools.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641416929627,"sku":"CEVIK-CA-2809914801","price":67.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/enrollador-manguera-aire-9-m-michelin-michelin-1.jpg?v=1793864760"},{"product_id":"kit-accesorios-compresor","title":"Compressor accessory kit with universal coupler","description":"\u003cp\u003e\u003cstrong\u003eStart using your compressor from day one with everything you need to blow, inflate, paint and clean.\u003c\/strong\u003e Buying a compressor and discovering you have neither a hose nor any guns is more common than you might think. This kit brings together the basics for getting started with a compressor at home or in the workshop, with a universal coupler compatible with most compressors on the market.\u003c\/p\u003e\u003cp\u003eChoose the version that suits your needs: 5 pieces (blow gun, inflation gun, spray gun, paraffin gun and 5 m coiled hose), 6 pieces (blow gun, inflation gun, 5 m coiled hose and 3 inflation nozzles) or 8 pieces (blow, inflation, spray and paraffin guns, 5 m coiled hose and 3 nozzles, in a toolbox).\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to use:\u003c\/strong\u003e hose and tools in a single order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal coupler:\u003c\/strong\u003e the most widespread on workshop and DIY compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree configurations:\u003c\/strong\u003e 5, 6 or 8 pieces, depending on what you need.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 m coiled hose:\u003c\/strong\u003e stretches out and retracts on its own, without tangling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInflating tyres, bicycles, balls and inflatables.\u003c\/li\u003e\n\u003cli\u003eBlowing and cleaning parts, machines and workbenches.\u003c\/li\u003e\n\u003cli\u003ePainting small surfaces and applying liquids or paraffin for degreasing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e universal coupler\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose:\u003c\/strong\u003e 5 m coiled hose (all kits)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 pieces:\u003c\/strong\u003e blow, inflation, spray and paraffin guns and coiled hose; cardboard box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 pieces:\u003c\/strong\u003e blow gun, inflation gun, coiled hose and 3 inflation nozzles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 pieces:\u003c\/strong\u003e blow, inflation, spray and paraffin guns, coiled hose and 3 nozzles; toolbox\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eFor painting and paraffin spraying, fit a pressure regulator with filter at the compressor outlet: clean air at just the right pressure improves the finish and protects the guns. Empty and clean the spray gun after every use.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs it suitable for my compressor?\u003c\/h3\u003e\u003cp\u003eIt has a universal coupler, the most widespread on workshop and DIY compressors.\u003c\/p\u003e\u003ch3\u003eWhich one should I choose?\u003c\/h3\u003e\u003cp\u003eThe 6-piece kit if you are only going to inflate and blow; the 5- or 8-piece kit if you also want to paint and spray paraffin.\u003c\/p\u003e\u003ch3\u003eHow long is the hose?\u003c\/h3\u003e\u003cp\u003eAll the kits include a 5-metre coiled hose.\u003c\/p\u003e\u003ch3\u003eWhat is the paraffin gun for?\u003c\/h3\u003e\u003cp\u003eFor spraying paraffin or degreasing liquids onto parts and engines before cleaning them.\u003c\/p\u003e\u003ch3\u003eWhich kit comes in a toolbox?\u003c\/h3\u003e\u003cp\u003eThe 8-piece kit comes in a toolbox; the 5-piece kit comes in a cardboard box.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is it suitable for my compressor?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It has a universal coupler, the most widespread on workshop and DIY compressors.\"}},{\"@type\":\"Question\",\"name\":\"Which one should I choose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The 6-piece kit if you are only going to inflate and blow; the 5- or 8-piece kit if you also want to paint and spray paraffin.\"}},{\"@type\":\"Question\",\"name\":\"How long is the hose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"All the kits include a 5-metre coiled hose.\"}},{\"@type\":\"Question\",\"name\":\"What is the paraffin gun for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For spraying paraffin or degreasing liquids onto parts and engines before cleaning them.\"}},{\"@type\":\"Question\",\"name\":\"Which kit comes in a toolbox?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The 8-piece kit comes in a toolbox; the 5-piece kit comes in a cardboard box.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"5 pieces","offer_id":54641423188315,"sku":"CEVIK-CA-CK3300\/B","price":24.5,"currency_code":"EUR","in_stock":true},{"title":"6 pieces · inflating and blowing","offer_id":54641423221083,"sku":"CEVIK-CA-CK220","price":17.64,"currency_code":"EUR","in_stock":true},{"title":"8 pieces · with toolbox","offer_id":54641423253851,"sku":"CEVIK-CAKIT8PRO","price":39.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/kit-accesorios-compresor-vica-work-1.jpg?v=1793864976"},{"product_id":"boquilla-hinchado-universal","title":"Universal inflation nozzle for tyre inflator","description":"\u003cp\u003e\u003cstrong\u003eInflate quickly and without leaks: renew your inflator head in a minute.\u003c\/strong\u003e With use, the inflator nozzle loses its grip, the seal wears and air escapes at the valve instead of going into the tyre. This universal inflation head is the replacement part for tyre inflators with a 6 mm connection: it grips the valve firmly so you can inflate without losses and measure pressure accurately.\u003c\/p\u003e\u003cp\u003eIt is an inexpensive spare that restores your inflator's efficiency, ideal for tyre workshops, vehicle fleets, service stations or any workshop that works with compressed air every day.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirm fit:\u003c\/strong\u003e grips the valve securely and prevents leaks while inflating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal:\u003c\/strong\u003e for inflators with a 6 mm connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick replacement:\u003c\/strong\u003e you replace only the head, not the whole inflator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccurate inflation:\u003c\/strong\u003e with no losses, the gauge reading is more reliable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing the worn or broken nozzle of a tyre inflator.\u003c\/li\u003e\n\u003cli\u003eInflating tyres on cars, motorbikes, vans and machinery.\u003c\/li\u003e\n\u003cli\u003eKeeping a spare in the workshop so you never have to stop.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e universal inflation nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e tyre inflators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e CA-1110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eBefore fitting the new nozzle, cut the end of the hose if it has stretched and secure the joint firmly with its clamp. Press the nozzle straight onto the valve: if it goes on at an angle, it loses air and the pressure reading will not be reliable.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my inflator?\u003c\/h3\u003e\u003cp\u003eYes, if your inflator hose is for a 6 mm connection.\u003c\/p\u003e\u003ch3\u003eHow do I maintain it?\u003c\/h3\u003e\u003cp\u003eClean it with a dry cloth and check the seal from time to time.\u003c\/p\u003e\u003ch3\u003eWhich valves is it suitable for?\u003c\/h3\u003e\u003cp\u003eIt is designed for the standard tyre valves found on cars, motorbikes and vans.\u003c\/p\u003e\u003ch3\u003eHow do I know when to replace it?\u003c\/h3\u003e\u003cp\u003eIf you hear air escaping from the nozzle when inflating, or it will not stay on the valve, it is time to replace it.\u003c\/p\u003e\u003ch3\u003eDoes it include the hose?\u003c\/h3\u003e\u003cp\u003eNo, it is only the inflation head. It fits onto your inflator's hose.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is it compatible with my inflator?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, if your inflator hose is for a 6 mm connection.\"}},{\"@type\":\"Question\",\"name\":\"How do I maintain it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Clean it with a dry cloth and check the seal from time to time.\"}},{\"@type\":\"Question\",\"name\":\"Which valves is it suitable for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is designed for the standard tyre valves found on cars, motorbikes and vans.\"}},{\"@type\":\"Question\",\"name\":\"How do I know when to replace it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"If you hear air escaping from the nozzle when inflating, or it will not stay on the valve, it is time to replace it.\"}},{\"@type\":\"Question\",\"name\":\"Does it include the hose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, it is only the inflation head. It fits onto your inflator's hose.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641425449307,"sku":"CEVIK-CA-1110","price":2.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/boquilla-hinchado-universal-vica-work-1.jpg?v=1793865069"},{"product_id":"hinchador-neumaticos-manometro","title":"Tyre inflator with pressure gauge","description":"\u003cp\u003e\u003cstrong\u003eInflate, deflate and read your tyre pressure in a single action.\u003c\/strong\u003e Checking and adjusting tyre pressure means safety and savings. This inflator connects to the compressor with a quick connector and lets you inflate, deflate and read the pressure in a single action.\u003c\/p\u003e\u003cp\u003eChoose the standard model, with an aluminium body, a rubber-protected 63 mm gauge and a dual bar\/psi scale, or the professional model approved to EN 12645:2014, with an 80 mm gauge and a 1-metre hose, designed for workshops.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect reading:\u003c\/strong\u003e you see the pressure as you inflate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick connection:\u003c\/strong\u003e connects to and disconnects from the compressor instantly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected gauge:\u003c\/strong\u003e rubber cover on the standard model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproved:\u003c\/strong\u003e the 80 mm model complies with EN 12645:2014.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 m hose:\u003c\/strong\u003e on the professional model, making it easy to reach every wheel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMechanical and tyre workshops and fleets.\u003c\/li\u003e\n\u003cli\u003eService stations and dealerships.\u003c\/li\u003e\n\u003cli\u003eHome use: car, motorbike, bicycle, trailer.\u003c\/li\u003e\n\u003cli\u003eAgricultural and construction machinery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e aluminium body, Ø 63 mm gauge with rubber protector, 0-12 bar \/ 0-174 psi scale, 30 cm hose, 1\/4\" quick connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproved:\u003c\/strong\u003e EN 12645:2014 standard, Ø 80 mm gauge reading in bar, 1 m hose, ergonomic handle, maximum pressure 12 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection to compressor:\u003c\/strong\u003e quick connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eAlways measure the pressure when the tyres are cold, before driving, and compare it with the vehicle label (door or fuel filler flap). Check the hose and nozzle from time to time: even a small leak distorts the reading.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat is the difference between the two?\u003c\/h3\u003e\u003cp\u003eThe standard model is for general use; the approved model has a larger gauge (80 mm), a 1 m hose and complies with EN 12645:2014 for professional use.\u003c\/p\u003e\u003ch3\u003eWhat units does it measure in?\u003c\/h3\u003e\u003cp\u003eThe standard model in bar and psi; the approved model in bar.\u003c\/p\u003e\u003ch3\u003eWhat is the maximum pressure?\u003c\/h3\u003e\u003cp\u003eBoth have a scale up to 12 bar.\u003c\/p\u003e\u003ch3\u003eIs it suitable for any compressor?\u003c\/h3\u003e\u003cp\u003eYes, using a quick connection to the hose coupler.\u003c\/p\u003e\u003ch3\u003eCan I deflate with it?\u003c\/h3\u003e\u003cp\u003eYes, it lets you adjust the pressure by releasing air until you reach the desired value.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is the difference between the two?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The standard model is for general use; the approved model has a larger gauge (80 mm), a 1 m hose and complies with EN 12645:2014 for professional use.\"}},{\"@type\":\"Question\",\"name\":\"What units does it measure in?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The standard model in bar and psi; the approved model in bar.\"}},{\"@type\":\"Question\",\"name\":\"What is the maximum pressure?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Both have a scale up to 12 bar.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for any compressor?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, using a quick connection to the hose coupler.\"}},{\"@type\":\"Question\",\"name\":\"Can I deflate with it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, it lets you adjust the pressure by releasing air until you reach the desired value.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Standard · Ø 63 mm","offer_id":54641427120475,"sku":"CEVIK-CA-1180\/1","price":15.68,"currency_code":"EUR","in_stock":true},{"title":"Approved · Ø 80 mm","offer_id":54641427153243,"sku":"CEVIK-CA-60G-T","price":60.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/hinchador-neumaticos-manometro-vica-work-1.jpg?v=1793865097"},{"product_id":"kit-boquillas-inflado","title":"Set of 3 inflation nozzles for balls, bicycles and inflatables","description":"\u003cp\u003e\u003cstrong\u003eGet more out of your compressor: inflate bikes, balls and air beds in seconds.\u003c\/strong\u003e A compressor is not just for car tyres. With these three nozzles you can use compressed air to inflate everything that is not a car tyre: bicycle tyres, balls and inflatable boats or other inflatables, in much less time than with a hand pump.\u003c\/p\u003e\u003cp\u003eThey have a universal connection, valid for most tyre inflators and compressors, and fit in any drawer. A small, inexpensive accessory that turns your compressor into the inflator for the whole family, the sports club or the pool area. And thanks to the universal connection, you can also use them on the workshop compressor or the one at home without adaptors.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree uses in one set:\u003c\/strong\u003e bicycle, balls and inflatables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal connection:\u003c\/strong\u003e for most tyre inflators and compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast inflation:\u003c\/strong\u003e much more convenient than a hand pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact:\u003c\/strong\u003e stores with the rest of your compressor accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInflating bicycle tyres.\u003c\/li\u003e\n\u003cli\u003eInflating footballs, basketballs or volleyballs.\u003c\/li\u003e\n\u003cli\u003eInflating boats, air beds and pool or beach inflatables.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e 3 nozzles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUses:\u003c\/strong\u003e bicycle tyres, balls, boats and inflatables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e CA-1110\/5\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eInflate balls and inflatables gradually and with the compressor pressure turned down: compressed air fills them very quickly and it is easy to overdo it. Moisten the ball needle slightly before inserting it to avoid damaging the valve.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow are they used?\u003c\/h3\u003e\u003cp\u003eThey attach to the head of the tyre inflator or the compressor's inflation gun.\u003c\/p\u003e\u003ch3\u003eIs it suitable for bikes?\u003c\/h3\u003e\u003cp\u003eYes, one of the nozzles is specifically for bicycle tyres.\u003c\/p\u003e\u003ch3\u003eWhich nozzles are included?\u003c\/h3\u003e\u003cp\u003eThree: one for bicycle tyres, one for balls and one for boats and inflatables.\u003c\/p\u003e\u003ch3\u003eIs it compatible with my compressor?\u003c\/h3\u003e\u003cp\u003eThey have a universal connection, compatible with most tyre inflators and inflation guns.\u003c\/p\u003e\u003ch3\u003eWhat pressure should I use?\u003c\/h3\u003e\u003cp\u003eThe pressure recommended by the manufacturer of each item. For balls and inflatables, it is best to reduce the pressure and inflate gradually.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How are they used?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"They attach to the head of the tyre inflator or the compressor's inflation gun.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for bikes?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, one of the nozzles is specifically for bicycle tyres.\"}},{\"@type\":\"Question\",\"name\":\"Which nozzles are included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Three: one for bicycle tyres, one for balls and one for boats and inflatables.\"}},{\"@type\":\"Question\",\"name\":\"Is it compatible with my compressor?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"They have a universal connection, compatible with most tyre inflators and inflation guns.\"}},{\"@type\":\"Question\",\"name\":\"What pressure should I use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The pressure recommended by the manufacturer of each item. For balls and inflatables, it is best to reduce the pressure and inflate gradually.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641427579227,"sku":"CEVIK-CA-1110\/5","price":4.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/kit-boquillas-inflado-vica-work-1.jpg?v=1793865113"},{"product_id":"codo-roscado-hembra-hembra-aire-comprimido","title":"90° female-female threaded elbow for compressed air","description":"\u003cp\u003e\u003cstrong\u003eTurn the air line through 90° in a tight space without straining hoses or pipes.\u003c\/strong\u003e When a fitting sits right up against a wall, the air receiver or the compressor housing, forcing the hose or pipe into a tight bend causes kinks and leaks. This 90° L-fitting has two female threads of the same size and is used to change the direction of a compressed air line or to mount accessories on the compressor neatly.\u003c\/p\u003e\u003cp\u003eAvailable in 1\/8\", 1\/4\" and 3\/8\", the most common sizes on workshop compressors, regulators, pressure gauges and air networks. Combined with hex nipples and reducers, it lets you solve almost any installation, however awkward the available space.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e90° change of direction:\u003c\/strong\u003e compact installations with no forced bends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFemale-female:\u003c\/strong\u003e connects two parts with male threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree sizes:\u003c\/strong\u003e 1\/8\", 1\/4\" and 3\/8\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop use:\u003c\/strong\u003e compressors, regulators, pressure gauges and air networks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePositioning a pressure gauge, a quick coupler or a regulator.\u003c\/li\u003e\n\u003cli\u003eGetting round corners in compressed air installations.\u003c\/li\u003e\n\u003cli\u003eMounting accessories on the compressor or air receiver outlet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e 90° elbow (L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreads:\u003c\/strong\u003e female - female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e 1\/8\" · 1\/4\" · 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e compressed air\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eAlways seal the male threads going into the elbow with PTFE tape or thread sealant, winding it in the direction of the thread. Tighten just enough: on tapered threads, too much torque can crack the female part.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need to use PTFE tape?\u003c\/h3\u003e\u003cp\u003eYes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\u003c\/p\u003e\u003ch3\u003eIs it suitable for water?\u003c\/h3\u003e\u003cp\u003eIt is designed for compressed air; for other fluids, please check with us first.\u003c\/p\u003e\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\u003cp\u003eThe same as the male thread of the parts you are going to join: 1\/8\", 1\/4\" or 3\/8\". Both threads on the elbow are the same.\u003c\/p\u003e\u003ch3\u003eCan I join two different sizes?\u003c\/h3\u003e\u003cp\u003eYes, by combining it with a male-female threaded reducer of the appropriate size.\u003c\/p\u003e\u003ch3\u003eWhat if I need to connect two female threads?\u003c\/h3\u003e\u003cp\u003eUse a male-male threaded hex nipple between the elbow and the other part.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Do I need to use PTFE tape?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for water?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is designed for compressed air; for other fluids, please check with us first.\"}},{\"@type\":\"Question\",\"name\":\"Which size do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The same as the male thread of the parts you are going to join: 1\/8\\\", 1\/4\\\" or 3\/8\\\". Both threads on the elbow are the same.\"}},{\"@type\":\"Question\",\"name\":\"Can I join two different sizes?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, by combining it with a male-female threaded reducer of the appropriate size.\"}},{\"@type\":\"Question\",\"name\":\"What if I need to connect two female threads?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Use a male-male threaded hex nipple between the elbow and the other part.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"1\/8\"","offer_id":54641442685275,"sku":"CEVIK-CA-260\/1","price":3.92,"currency_code":"EUR","in_stock":true},{"title":"1\/4\"","offer_id":54641442718043,"sku":"CEVIK-CA-260\/2","price":4.17,"currency_code":"EUR","in_stock":true},{"title":"3\/8\"","offer_id":54641442750811,"sku":"CEVIK-CA-260\/3","price":4.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/codo-roscado-hembra-hembra-aire-comprimido-vica-work-1.jpg?v=1793865526"},{"product_id":"reduccion-roscada-macho-hembra","title":"Male-female threaded reducer for compressed air","description":"\u003cp\u003e\u003cstrong\u003eConnect parts of different sizes in your air installation without any hassle.\u003c\/strong\u003e It is very common for the outlet of the compressor, receiver or regulator not to match the thread of the coupler, filter or hose you want to fit. This threaded reducer is the adaptor with a male thread on one side and a female thread of a different size on the other, for joining hoses, pipes or accessories of different diameters in your air installation.\u003c\/p\u003e\u003cp\u003eAvailable in four combinations: male 1\/8\" - female 1\/4\", male 1\/4\" - female 3\/8\", female 3\/8\" - male 1\/2\" and male 1\/2\" - female 3\/4\". With them you go from one size to another in a single part, without fitting several chained fittings that add leak points.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect adaptation:\u003c\/strong\u003e change size in a single part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMale-female:\u003c\/strong\u003e screws into one part and receives the other.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour combinations:\u003c\/strong\u003e from 1\/8\" to 3\/4\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFewer leaks:\u003c\/strong\u003e fewer chained fittings in the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAdapting the compressor or air receiver outlet to an accessory of a different size.\u003c\/li\u003e\n\u003cli\u003eFitting small-thread pressure gauges to larger ports.\u003c\/li\u003e\n\u003cli\u003eJoining hoses, pipes and accessories of different diameters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e male-female reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e M 1\/8\"-F 1\/4\" · M 1\/4\"-F 3\/8\" · F 3\/8\"-M 1\/2\" · M 1\/2\"-F 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e compressed air\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eSeal the male thread with PTFE tape in the direction of the thread and do not overtighten: on a tapered thread, too much torque can crack the female part. Check the joint with soapy water before considering the installation finished.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need to use PTFE tape?\u003c\/h3\u003e\u003cp\u003eYes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\u003c\/p\u003e\u003ch3\u003eHow do I know which size I need?\u003c\/h3\u003e\u003cp\u003eLook at the thread of the two parts you want to join: the reducer must have one male size and one female size that match them.\u003c\/p\u003e\u003ch3\u003eWhat combinations are available?\u003c\/h3\u003e\u003cp\u003eMale 1\/8\" - female 1\/4\", male 1\/4\" - female 3\/8\", female 3\/8\" - male 1\/2\" and male 1\/2\" - female 3\/4\".\u003c\/p\u003e\u003ch3\u003eDoes reducing cause a loss of flow?\u003c\/h3\u003e\u003cp\u003eWhen going down to a smaller size, the air passage is narrower; for high-consumption tools, keep the larger size for as long a section as possible.\u003c\/p\u003e\u003ch3\u003eWhat if both parts are male?\u003c\/h3\u003e\u003cp\u003eIn that case you need a female-female socket or, if they are of different sizes, a combination of socket and reducer.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Do I need to use PTFE tape?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\"}},{\"@type\":\"Question\",\"name\":\"How do I know which size I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Look at the thread of the two parts you want to join: the reducer must have one male size and one female size that match them.\"}},{\"@type\":\"Question\",\"name\":\"What combinations are available?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Male 1\/8\\\" - female 1\/4\\\", male 1\/4\\\" - female 3\/8\\\", female 3\/8\\\" - male 1\/2\\\" and male 1\/2\\\" - female 3\/4\\\".\"}},{\"@type\":\"Question\",\"name\":\"Does reducing cause a loss of flow?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"When going down to a smaller size, the air passage is narrower; for high-consumption tools, keep the larger size for as long a section as possible.\"}},{\"@type\":\"Question\",\"name\":\"What if both parts are male?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"In that case you need a female-female socket or, if they are of different sizes, a combination of socket and reducer.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"M 1\/8\" - F 1\/4\"","offer_id":54641442980187,"sku":"CEVIK-CA-270\/1","price":2.89,"currency_code":"EUR","in_stock":true},{"title":"M 1\/4\" - F 3\/8\"","offer_id":54641443012955,"sku":"CEVIK-CA-270\/3","price":3.14,"currency_code":"EUR","in_stock":true},{"title":"F 3\/8\" - M 1\/2\"","offer_id":54641443045723,"sku":"CEVIK-CA-270\/6","price":4.17,"currency_code":"EUR","in_stock":true},{"title":"M 1\/2\" - F 3\/4\"","offer_id":54641443078491,"sku":"CEVIK-CA-270\/9","price":4.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/reduccion-roscada-macho-hembra-vica-work-1.jpg?v=1793865548"},{"product_id":"machon-roscado-macho-macho","title":"Male-male threaded hex nipple for compressed air","description":"\u003cp\u003e\u003cstrong\u003eJoin two parts with female threads in seconds, of the same size or of different sizes.\u003c\/strong\u003e In an air installation, almost everything has a female thread: quick couplers, regulators, filters, shut-off valves or air receiver outlets. The threaded hex nipple is the fitting with two male threads, equal or of different sizes, that lets you join these parts directly, without lengths of pipe or makeshift adaptors.\u003c\/p\u003e\u003cp\u003eAvailable in six combinations: 1\/8\"-1\/4\", 1\/4\"-1\/4\", 1\/4\"-3\/8\", 3\/8\"-3\/8\", 3\/8\"-1\/2\" and 1\/2\"-1\/2\". The reducing versions act as both a connector and a size adaptor, so with a couple of hex nipples you can handle most workshop installations.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect connection:\u003c\/strong\u003e joins two female parts without an intermediate pipe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReducing hex nipples:\u003c\/strong\u003e join and adapt sizes in a single part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix sizes:\u003c\/strong\u003e from 1\/8\" to 1\/2\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact assembly:\u003c\/strong\u003e shorter installations with fewer leak points.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFitting a quick coupler to the outlet of a regulator or filter.\u003c\/li\u003e\n\u003cli\u003eJoining shut-off valves, filters and regulators in line.\u003c\/li\u003e\n\u003cli\u003eAdapting a 3\/8\" outlet to a 1\/2\" accessory (or vice versa).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e male-male hex nipple\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e 1\/8\"-1\/4\" · 1\/4\"-1\/4\" · 1\/4\"-3\/8\" · 3\/8\"-3\/8\" · 3\/8\"-1\/2\" · 1\/2\"-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e compressed air\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eWrap the threads with PTFE tape in the direction of the thread, leaving the first thread clear so no debris gets into the installation. Hold the female part with a second spanner while tightening so you do not strain the accessory.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need to use PTFE tape?\u003c\/h3\u003e\u003cp\u003eYes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\u003c\/p\u003e\u003ch3\u003eWhat is a reducing hex nipple for?\u003c\/h3\u003e\u003cp\u003eFor joining two female parts of different sizes, for example a 3\/8\" outlet with a 1\/2\" coupler.\u003c\/p\u003e\u003ch3\u003eWhat is the difference from a socket?\u003c\/h3\u003e\u003cp\u003eThe hex nipple has two male threads; the socket has two female threads.\u003c\/p\u003e\u003ch3\u003eHow do I know which size I need?\u003c\/h3\u003e\u003cp\u003eCheck the female thread of the two parts you are going to join and choose the hex nipple with those two sizes.\u003c\/p\u003e\u003ch3\u003eIs it suitable for water?\u003c\/h3\u003e\u003cp\u003eIt is designed for compressed air installations; for other fluids, please contact us first.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Do I need to use PTFE tape?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\"}},{\"@type\":\"Question\",\"name\":\"What is a reducing hex nipple for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For joining two female parts of different sizes, for example a 3\/8\\\" outlet with a 1\/2\\\" coupler.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference from a socket?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The hex nipple has two male threads; the socket has two female threads.\"}},{\"@type\":\"Question\",\"name\":\"How do I know which size I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Check the female thread of the two parts you are going to join and choose the hex nipple with those two sizes.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for water?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is designed for compressed air installations; for other fluids, please contact us first.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"1\/8\" - 1\/4\"","offer_id":54641443373403,"sku":"CEVIK-CA-290\/2","price":3.09,"currency_code":"EUR","in_stock":true},{"title":"1\/4\" - 1\/4\"","offer_id":54641443406171,"sku":"CEVIK-CA-290\/5","price":3.09,"currency_code":"EUR","in_stock":true},{"title":"1\/4\" - 3\/8\"","offer_id":54641443438939,"sku":"CEVIK-CA-290\/6","price":3.33,"currency_code":"EUR","in_stock":true},{"title":"3\/8\" - 3\/8\"","offer_id":54641443471707,"sku":"CEVIK-CA-290\/8","price":3.33,"currency_code":"EUR","in_stock":true},{"title":"3\/8\" - 1\/2\"","offer_id":54641443504475,"sku":"CEVIK-CA-290\/9","price":4.02,"currency_code":"EUR","in_stock":true},{"title":"1\/2\" - 1\/2\"","offer_id":54641443537243,"sku":"CEVIK-CA-290\/10","price":4.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/machon-roscado-macho-macho-vica-work-1.jpg?v=1793865571"},{"product_id":"manguito-roscado-hembra-hembra","title":"Female-female threaded socket for compressed air","description":"\u003cp\u003e\u003cstrong\u003eJoin two male-threaded parts in line firmly, neatly and without leaks.\u003c\/strong\u003e Sometimes what you need is not a bend or a change of size, but simply to join two male-threaded accessories one after the other: a hex nipple with a coupler, a threaded pipe with a valve, or two sections of an installation. This threaded socket is a straight fitting with two female threads of the same size, designed precisely for that in compressed air installations.\u003c\/p\u003e\u003cp\u003eAvailable in 1\/4\", 3\/8\" and 1\/2\", the standard sizes on workshop compressors, air receivers, regulators and air networks. It is the part that turns two male threads into a solid, airtight joint and, combined with hex nipples and reducers, lets you put together almost any configuration.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight connection:\u003c\/strong\u003e does not change the direction of the air or add bends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFemale-female:\u003c\/strong\u003e connects two male-threaded parts of the same size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree sizes:\u003c\/strong\u003e 1\/4\", 3\/8\" and 1\/2\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple installation:\u003c\/strong\u003e all you need is PTFE tape and a spanner.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtending an air line by joining two threaded sections.\u003c\/li\u003e\n\u003cli\u003eJoining hex nipples, quick couplers and shut-off valves in line.\u003c\/li\u003e\n\u003cli\u003eRepairing or extending workshop compressed air installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e straight female-female socket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e 1\/4\" · 3\/8\" · 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e compressed air\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eSeal the male threads going into the socket with PTFE tape, in the direction of the thread, and tighten while holding the other part with a second spanner so you do not strain the installation. Then check the joint with soapy water.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need to use PTFE tape?\u003c\/h3\u003e\u003cp\u003eYes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\u003c\/p\u003e\u003ch3\u003eWhat is the difference from a hex nipple?\u003c\/h3\u003e\u003cp\u003eThe socket has two female threads; the hex nipple has two male threads.\u003c\/p\u003e\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\u003cp\u003eThe same as the male thread of the two parts you are going to join: 1\/4\", 3\/8\" or 1\/2\".\u003c\/p\u003e\u003ch3\u003eCan I join different sizes?\u003c\/h3\u003e\u003cp\u003eNot with this socket, because both threads are the same. For different sizes, combine it with a threaded reducer.\u003c\/p\u003e\u003ch3\u003eIs it suitable for water?\u003c\/h3\u003e\u003cp\u003eIt is designed for compressed air installations; for other fluids, please contact us first.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Do I need to use PTFE tape?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference from a hex nipple?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The socket has two female threads; the hex nipple has two male threads.\"}},{\"@type\":\"Question\",\"name\":\"Which size do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The same as the male thread of the two parts you are going to join: 1\/4\\\", 3\/8\\\" or 1\/2\\\".\"}},{\"@type\":\"Question\",\"name\":\"Can I join different sizes?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not with this socket, because both threads are the same. For different sizes, combine it with a threaded reducer.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for water?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is designed for compressed air installations; for other fluids, please contact us first.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"1\/4\"","offer_id":54641443832155,"sku":"CEVIK-CA-280\/5","price":4.61,"currency_code":"EUR","in_stock":true},{"title":"3\/8\"","offer_id":54641443864923,"sku":"CEVIK-CA-280\/8","price":4.31,"currency_code":"EUR","in_stock":true},{"title":"1\/2\"","offer_id":54641443897691,"sku":"CEVIK-CA-280\/10","price":6.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-280_5.jpg?v=1793866726"},{"product_id":"llave-paso-hembra-hembra-aire-comprimido","title":"Female-female shut-off valve for compressed air","description":"\u003cp\u003e\u003cstrong\u003eShut off the air exactly where you need to, without emptying the receiver or stopping the whole workshop.\u003c\/strong\u003e Without a shut-off valve, every change of filter, coupler or tool means switching off the compressor and emptying the installation. This valve shuts off or opens the air supply instantly: fitted at the compressor outlet or at each outlet in the installation, it lets you isolate a section or change tools without losing the stored pressure.\u003c\/p\u003e\u003cp\u003eAvailable as a compact 1\/4\" model or a lever model in 1\/4\", 3\/8\" and 1\/2\", with female threads on both sides so it can be mounted directly onto hex nipples, couplers and accessories.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant shut-off:\u003c\/strong\u003e open and close the air in a single movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy maintenance:\u003c\/strong\u003e isolate filters and outlets without emptying the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo formats:\u003c\/strong\u003e lever, which is easier to operate, or compact, which takes up less space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree sizes:\u003c\/strong\u003e 1\/4\", 3\/8\" and 1\/2\" female-female.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompressor or air receiver outlet.\u003c\/li\u003e\n\u003cli\u003eAir outlets on the workshop network.\u003c\/li\u003e\n\u003cli\u003eUpstream of filters, regulators and drains for maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreads:\u003c\/strong\u003e female - female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e lever or compact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSizes:\u003c\/strong\u003e 1\/4\" (compact and lever) · 3\/8\" · 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e compressed air\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eInstall a shut-off valve at the outlet of each air receiver and upstream of each filter: maintenance will be much easier. Seal the male threads going into the valve with PTFE tape and do not use it to regulate the flow: it is designed to open or close.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need to use PTFE tape?\u003c\/h3\u003e\u003cp\u003eYes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\u003c\/p\u003e\u003ch3\u003eWhich one should I choose?\u003c\/h3\u003e\u003cp\u003eThe lever version is easier to operate; the compact version takes up less space.\u003c\/p\u003e\u003ch3\u003eWhich size do I need?\u003c\/h3\u003e\u003cp\u003eThe size of the male threads you are going to connect on each side: 1\/4\", 3\/8\" or 1\/2\".\u003c\/p\u003e\u003ch3\u003eWhere is it best installed?\u003c\/h3\u003e\u003cp\u003eAt the air receiver outlet, upstream of filters and regulators, and at each air outlet in the installation.\u003c\/p\u003e\u003ch3\u003eCan it be used to regulate pressure?\u003c\/h3\u003e\u003cp\u003eNo, the shut-off valve opens or closes the air. To adjust the pressure, use a regulator with a pressure gauge.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Do I need to use PTFE tape?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\"}},{\"@type\":\"Question\",\"name\":\"Which one should I choose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The lever version is easier to operate; the compact version takes up less space.\"}},{\"@type\":\"Question\",\"name\":\"Which size do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The size of the male threads you are going to connect on each side: 1\/4\\\", 3\/8\\\" or 1\/2\\\".\"}},{\"@type\":\"Question\",\"name\":\"Where is it best installed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"At the air receiver outlet, upstream of filters and regulators, and at each air outlet in the installation.\"}},{\"@type\":\"Question\",\"name\":\"Can it be used to regulate pressure?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, the shut-off valve opens or closes the air. To adjust the pressure, use a regulator with a pressure gauge.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Compact · 1\/4\"","offer_id":54641444454747,"sku":"CEVIK-CA-495\/5P","price":6.96,"currency_code":"EUR","in_stock":true},{"title":"Lever · 1\/4\"","offer_id":54641444487515,"sku":"CEVIK-CA-495\/1","price":11.27,"currency_code":"EUR","in_stock":true},{"title":"Lever · 3\/8\"","offer_id":54641444520283,"sku":"CEVIK-CA-495\/2","price":11.27,"currency_code":"EUR","in_stock":true},{"title":"Lever · 1\/2\"","offer_id":54641444553051,"sku":"CEVIK-CA-495\/3","price":17.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/llave-paso-hembra-hembra-aire-comprimido-vica-work-1.jpg?v=1793865623"},{"product_id":"racor-y-3-vias-1-4","title":"3-way Y fitting 1\/4\" with 1 male and 2 female","description":"\u003cp\u003e\u003cstrong\u003eDouble your compressor's air outlets without touching the installation.\u003c\/strong\u003e Having only one outlet means disconnecting one tool every time you want to use another, or sharing a hose between two people. This three-way branch fitting, with 1 male and 2 female 1\/4\" threads, takes two air outlets from a single outlet: for example, to use two tools or to fit two quick couplers.\u003c\/p\u003e\u003cp\u003eIt screws directly into the outlet of the compressor, the regulator or a network outlet, and you fit the couplers or accessories you need into its two female threads. A small, inexpensive and very practical solution for workshops, garages and workstations where more than one air tool is used.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo outlets from one:\u003c\/strong\u003e more outlets without modifying the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 male + 2 female:\u003c\/strong\u003e screws into the outlet and accepts two accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4\" thread:\u003c\/strong\u003e the most common size on workshop compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact:\u003c\/strong\u003e takes up very little space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFitting two quick couplers to the compressor outlet.\u003c\/li\u003e\n\u003cli\u003eWorking with two tools or two operators at the same time.\u003c\/li\u003e\n\u003cli\u003eTaking off a separate outlet for the pressure gauge or an auxiliary accessory.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWays:\u003c\/strong\u003e 3 (1 male + 2 female)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Y\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e compressed air\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e CA-485\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eBefore doubling up outlets, check that your compressor delivers enough flow for both tools at once: if not, the pressure will drop on both. Seal the male thread with PTFE tape and fit a quick coupler to each female thread.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eDo I need to use PTFE tape?\u003c\/h3\u003e\u003cp\u003eYes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\u003c\/p\u003e\u003ch3\u003eCan I use two tools at the same time?\u003c\/h3\u003e\u003cp\u003eYes, as long as the compressor delivers enough flow for both.\u003c\/p\u003e\u003ch3\u003eWhat thread size does it have?\u003c\/h3\u003e\u003cp\u003eAll three ways are 1\/4\": one male for the outlet and two female for the accessories.\u003c\/p\u003e\u003ch3\u003eWhat do I fit on the outlets?\u003c\/h3\u003e\u003cp\u003eUsually two quick couplers with a 1\/4\" male thread, although you can fit any accessory of that size.\u003c\/p\u003e\u003ch3\u003eWhat if my outlet is a different size?\u003c\/h3\u003e\u003cp\u003eYou can adapt it with a threaded reducer or a reducing hex nipple of the right size.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Do I need to use PTFE tape?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\"}},{\"@type\":\"Question\",\"name\":\"Can I use two tools at the same time?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, as long as the compressor delivers enough flow for both.\"}},{\"@type\":\"Question\",\"name\":\"What thread size does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"All three ways are 1\/4\\\": one male for the outlet and two female for the accessories.\"}},{\"@type\":\"Question\",\"name\":\"What do I fit on the outlets?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Usually two quick couplers with a 1\/4\\\" male thread, although you can fit any accessory of that size.\"}},{\"@type\":\"Question\",\"name\":\"What if my outlet is a different size?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"You can adapt it with a threaded reducer or a reducing hex nipple of the right size.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641445011803,"sku":"CEVIK-CA-485","price":4.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/racor-y-3-vias-1-4-vica-work-1.jpg?v=1793865641"},{"product_id":"grifo-purgador-calderin-compresor","title":"Tank drain valve for compressors","description":"\u003cp\u003eCompressed air carries moisture, and that moisture condenses at the bottom of the tank. If it isn't drained, the water \u003cb\u003erusts the tank from the inside\u003c\/b\u003e and eventually reaches your tools and paint. The \u003cb\u003etank drain valve\u003c\/b\u003e is the part that lets you empty it in seconds.\u003c\/p\u003e\n\u003cp\u003eIt screws into the bottom of the tank and is available in \u003cb\u003e1\/4\" and 3\/8\"\u003c\/b\u003e. If yours drips, is seized or broken, replace it: it is an inexpensive spare that \u003cb\u003eextends the life of the tank\u003c\/b\u003e and protects everything you connect to the compressor.\u003c\/p\u003e\n\u003cp\u003eDraining daily is the simplest and most cost-effective compressor maintenance, and with a valve in good condition it takes seconds and keeps your hands clean.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEmpties condensate:\u003c\/b\u003e protects the tank from corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo threads:\u003c\/b\u003e 1\/4\" and 3\/8\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInexpensive spare:\u003c\/b\u003e replaces a drain valve that drips or won't open.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProtects your tools:\u003c\/b\u003e less water in the air line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstant fitting:\u003c\/b\u003e screws in with PTFE tape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing the tank drain valve.\u003c\/li\u003e\n\u003cli\u003eDaily compressor maintenance.\u003c\/li\u003e\n\u003cli\u003eFixing drips at the bottom of the tank.\u003c\/li\u003e\n\u003cli\u003eWorkshop, site and DIY compressors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eUse:\u003c\/b\u003e manual tank draining\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread sizes:\u003c\/b\u003e 1\/4\" · 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e threaded, with PTFE tape or sealant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e drain the tank at the end of each day with some pressure still inside: the water comes out more easily and you prevent internal rust. If you'd rather not have to remember, a programmable automatic drain does it for you.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat size do I need?\u003c\/h3\u003e\n\u003cp\u003eThe thread size of your compressor's current drain valve: 1\/4\" or 3\/8\".\u003c\/p\u003e\n\u003ch3\u003eDo I need to use PTFE tape?\u003c\/h3\u003e\n\u003cp\u003eYes, on tapered male threads apply PTFE tape or thread sealant to prevent leaks.\u003c\/p\u003e\n\u003ch3\u003eHow often should I drain it?\u003c\/h3\u003e\n\u003cp\u003eIdeally at the end of each working day, with some pressure in the tank.\u003c\/p\u003e\n\u003ch3\u003eHow do I replace it?\u003c\/h3\u003e\n\u003cp\u003eWith the compressor disconnected and the tank completely empty, unscrew the old drain valve and screw in the new one with PTFE tape.\u003c\/p\u003e\n\u003ch3\u003eIs there an automatic option?\u003c\/h3\u003e\n\u003cp\u003eYes, a programmable automatic condensate drain empties the water without you having to remember.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What size do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The thread size of your compressor's current drain valve: 1\/4\\\" or 3\/8\\\".\"}},{\"@type\":\"Question\",\"name\":\"Do I need to use PTFE tape?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, on tapered male threads apply PTFE tape or thread sealant to prevent leaks.\"}},{\"@type\":\"Question\",\"name\":\"How often should I drain it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Ideally at the end of each working day, with some pressure in the tank.\"}},{\"@type\":\"Question\",\"name\":\"How do I replace it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"With the compressor disconnected and the tank completely empty, unscrew the old drain valve and screw in the new one with PTFE tape.\"}},{\"@type\":\"Question\",\"name\":\"Is there an automatic option?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, a programmable automatic condensate drain empties the water without you having to remember.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"1\/4\"","offer_id":54641445208411,"sku":"CEVIK-CA-490\/1","price":3.87,"currency_code":"EUR","in_stock":true},{"title":"3\/8\"","offer_id":54641445241179,"sku":"CEVIK-CA-490\/2","price":4.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-490_1.jpg?v=1793866727"},{"product_id":"tuerca-fresada-1-4-neumatica","title":"1\/4\" knurled nut for pneumatic connections","description":"\u003cp\u003e\u003cstrong\u003eA firm hose joint that you tighten by hand and that does not work loose.\u003c\/strong\u003e On pneumatic hoses, the union nut is a small part that makes the difference between a secure connection and a constant leak. This 1\/4\" metal nut is used for pneumatic hose joints and connections of that size, and its knurled surface improves grip when fitting and tightening it.\u003c\/p\u003e\u003cp\u003eThe anti-slip knurling lets you do the initial tightening by hand, even when wearing gloves or with oily fingers, and then finish off with a spanner. It is a practical spare for repairing worn joints or completing hose assemblies in the workshop, without having to replace the whole connection. It is worth keeping a few in the spares drawer: they cost little and save you stopping a job because of a joint that has stripped its thread or got lost during disassembly.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnurled surface:\u003c\/strong\u003e better grip when fitting and tightening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal:\u003c\/strong\u003e sturdy and durable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4\" thread:\u003c\/strong\u003e the most common size for workshop connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInexpensive spare:\u003c\/strong\u003e repairs the joint without replacing the whole connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" pneumatic hose joints.\u003c\/li\u003e\n\u003cli\u003eReplacing a damaged or lost union nut.\u003c\/li\u003e\n\u003cli\u003eHose assembly and repairs in the workshop.\u003c\/li\u003e\n\u003cli\u003eTopping up the spares in your pneumatic toolbox.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e anti-slip knurling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e CA-49A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eDo the initial tightening by hand to make sure the thread goes in straight, then finish off with a spanner without overtightening. A thread that goes in crooked gets damaged and ends up leaking however hard you tighten it. Check the joints from time to time with soapy water: a bubble reveals a leak that is costing you air and electricity.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat is it for?\u003c\/h3\u003e\u003cp\u003eFor joining 1\/4\" pneumatic hoses and connections.\u003c\/p\u003e\u003ch3\u003eCan it be tightened by hand?\u003c\/h3\u003e\u003cp\u003eYes, the knurling helps with the initial tightening by hand.\u003c\/p\u003e\u003ch3\u003eWhat material is it made of?\u003c\/h3\u003e\u003cp\u003eIt is a metal nut with an anti-slip knurled finish.\u003c\/p\u003e\u003ch3\u003eWhat size is it?\u003c\/h3\u003e\u003cp\u003e1\/4\" thread, the standard for workshop pneumatic connections.\u003c\/p\u003e\u003ch3\u003eHow many units are included?\u003c\/h3\u003e\u003cp\u003eIt is sold individually.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is it for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For joining 1\/4\\\" pneumatic hoses and connections.\"}},{\"@type\":\"Question\",\"name\":\"Can it be tightened by hand?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, the knurling helps with the initial tightening by hand.\"}},{\"@type\":\"Question\",\"name\":\"What material is it made of?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is a metal nut with an anti-slip knurled finish.\"}},{\"@type\":\"Question\",\"name\":\"What size is it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"1\/4\\\" thread, the standard for workshop pneumatic connections.\"}},{\"@type\":\"Question\",\"name\":\"How many units are included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is sold individually.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641445634395,"sku":"CEVIK-CA-49A","price":3.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/tuerca-fresada-1-4-neumatica-vica-work-1.jpg?v=1793865683"},{"product_id":"valvula-seguridad-compresor","title":"Threaded safety valve for compressors","description":"\u003cp\u003eIf the pressure switch fails and the motor doesn't stop, the pressure keeps rising inside the tank. The \u003cb\u003esafety valve\u003c\/b\u003e is what prevents an accident: \u003cb\u003eit releases the air as soon as the pressure exceeds its limit\u003c\/b\u003e. It is an essential safety component on any compressor.\u003c\/p\u003e\n\u003cp\u003eThis \u003cb\u003ethreaded safety valve\u003c\/b\u003e is compact and robust, with a \u003cb\u003e1\/4\" or 3\/8\" thread for up to 11 bar\u003c\/b\u003e, or \u003cb\u003e3\/8\" 14 bar\u003c\/b\u003e for higher-pressure units. Replace it if yours releases air at normal pressure, is seized or has been tampered with.\u003c\/p\u003e\n\u003cp\u003eNo compressor should run with a doubtful safety valve: it is an inexpensive part that protects the tank, the installation and the people working nearby.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOverpressure protection:\u003c\/b\u003e releases the air if the pressure switch fails.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThree versions:\u003c\/b\u003e 1\/4\" 11 bar, 3\/8\" 11 bar and 3\/8\" 14 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact and robust:\u003c\/b\u003e designed for workshop and industrial compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTest ring:\u003c\/b\u003e lets you check it isn't seized.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEssential safety:\u003c\/b\u003e protects tank, equipment and people.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing the tank safety valve.\u003c\/li\u003e\n\u003cli\u003eRepairing valves that leak air or are seized.\u003c\/li\u003e\n\u003cli\u003e11 bar workshop compressors.\u003c\/li\u003e\n\u003cli\u003e14 bar high-pressure compressors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModels:\u003c\/b\u003e 1\/4\" up to 11 bar · 3\/8\" up to 11 bar · 3\/8\" 14 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFunction:\u003c\/b\u003e overpressure protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInstallation:\u003c\/b\u003e threaded into the tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e always replace it with one of the same thread and pressure as the original (check the compressor's rating plate) and pull the ring from time to time to check it isn't seized. Never replace it with a plug.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat pressure should I choose?\u003c\/h3\u003e\n\u003cp\u003eThe same as your compressor's original valve, never a higher-pressure one.\u003c\/p\u003e\n\u003ch3\u003eWhy is my valve leaking air?\u003c\/h3\u003e\n\u003cp\u003eIf it releases air at normal pressure it may be dirty or damaged: it needs replacing.\u003c\/p\u003e\n\u003ch3\u003eWhat threads are available?\u003c\/h3\u003e\n\u003cp\u003e1\/4\" and 3\/8\" for up to 11 bar, and 3\/8\" for 14 bar.\u003c\/p\u003e\n\u003ch3\u003eHow do I check that it works?\u003c\/h3\u003e\n\u003cp\u003eWith the compressor under pressure, pull the ring briefly: it should release air and close again when you let go.\u003c\/p\u003e\n\u003ch3\u003eCan I run without a safety valve?\u003c\/h3\u003e\n\u003cp\u003eNo, never: it is the component that prevents dangerous overpressure in the tank.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What pressure should I choose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The same as your compressor's original valve, never a higher-pressure one.\"}},{\"@type\":\"Question\",\"name\":\"Why is my valve leaking air?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"If it releases air at normal pressure it may be dirty or damaged: it needs replacing.\"}},{\"@type\":\"Question\",\"name\":\"What threads are available?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"1\/4\\\" and 3\/8\\\" for up to 11 bar, and 3\/8\\\" for 14 bar.\"}},{\"@type\":\"Question\",\"name\":\"How do I check that it works?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"With the compressor under pressure, pull the ring briefly: it should release air and close again when you let go.\"}},{\"@type\":\"Question\",\"name\":\"Can I run without a safety valve?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, never: it is the component that prevents dangerous overpressure in the tank.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"1\/4\" · 11 bar","offer_id":54641446584667,"sku":"CEVIK-CA-565\/1","price":5.0,"currency_code":"EUR","in_stock":true},{"title":"3\/8\" · 11 bar","offer_id":54641446617435,"sku":"CEVIK-CA-565\/4","price":8.77,"currency_code":"EUR","in_stock":true},{"title":"3\/8\" · 14 bar","offer_id":54641446650203,"sku":"CEVIK-CA1127190252","price":26.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/valvula-seguridad-compresor-vica-work-1.jpg?v=1793865716"},{"product_id":"purgador-automatico-programable-1-4","title":"1\/4\" programmable automatic condensate drain","description":"\u003cp\u003eThe water that condenses in the air receiver and air network is the enemy of tools, paintwork and pipework. This \u003cb\u003eprogrammable automatic drain\u003c\/b\u003e removes it for you at the intervals you choose, without relying on someone remembering to open the tap.\u003c\/p\u003e\n\u003cp\u003eIt fits a \u003cb\u003e1\/4\"\u003c\/b\u003e thread at the low point of the air receiver, filter or installation, and lets you \u003cb\u003eadjust the drain intervals\u003c\/b\u003e to suit the workload so you do not waste air.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eAutomatic draining:\u003c\/b\u003e the air receiver does not collect water even if nobody remembers.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eProgrammable:\u003c\/b\u003e set the drain intervals to suit your air consumption.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eLess wasted air:\u003c\/b\u003e drains at just the right frequency for your installation.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e1\/4\" thread:\u003c\/b\u003e direct fitting on air receivers and filters.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eDrier air:\u003c\/b\u003e protects tools, paintwork and pipework.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAir receivers on piston and screw compressors.\u003c\/li\u003e\n\u003cli\u003eLow points in compressed air networks.\u003c\/li\u003e\n\u003cli\u003eInstallations where air quality is critical, such as painting or food processing.\u003c\/li\u003e\n\u003cli\u003eWorkshops and industry with compressors running for long hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eType:\u003c\/b\u003e programmable automatic drain\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eThread:\u003c\/b\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eDrain interval:\u003c\/b\u003e programmable\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ePresentation:\u003c\/b\u003e blister pack\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ePackaging:\u003c\/b\u003e 13 x 8 x 2.5 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e install it with a \u003cb\u003eshut-off valve\u003c\/b\u003e upstream: you will be able to remove it for cleaning without emptying the air receiver. And start with short intervals in summer, when the most water condenses.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch3\u003eComplete your installation\u003c\/h3\u003e\u003cp\u003eFit a shut-off valve upstream of the drain so you can remove it without emptying the air receiver, and combine it with particulate filters or a refrigerated dryer if you need truly dry air for painting or sensitive processes.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhere is it installed?\u003c\/h3\u003e\n\u003cp\u003eAt the lowest point of the air receiver, filter or air network, with a 1\/4\" thread.\u003c\/p\u003e\n\u003ch3\u003eWhat advantage does it have over a manual tap?\u003c\/h3\u003e\n\u003cp\u003eIt drains automatically and regularly, with nothing forgotten, so the air receiver never collects water.\u003c\/p\u003e\n\u003ch3\u003eCan it be adjusted?\u003c\/h3\u003e\n\u003cp\u003eYes, the drain intervals are programmable.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for screw compressors?\u003c\/h3\u003e\n\u003cp\u003eYes, for any air receiver or drain point with a 1\/4\" thread.\u003c\/p\u003e\n\u003ch3\u003eDoes it need maintenance?\u003c\/h3\u003e\n\u003cp\u003eClean its filter or inlet regularly so that it does not become clogged with dirt.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Where is it installed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"At the lowest point of the air receiver, filter or air network, with a 1\/4\\\" thread.\"}},{\"@type\":\"Question\",\"name\":\"What advantage does it have over a manual tap?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It drains automatically and regularly, with nothing forgotten, so the air receiver never collects water.\"}},{\"@type\":\"Question\",\"name\":\"Can it be adjusted?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, the drain intervals are programmable.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for screw compressors?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, for any air receiver or drain point with a 1\/4\\\" thread.\"}},{\"@type\":\"Question\",\"name\":\"Does it need maintenance?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Clean its filter or inlet regularly so that it does not become clogged with dirt.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641446912347,"sku":"CEVIK-CA1127560108","price":81.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/purgador-automatico-programable-1-4-vica-work-1.jpg?v=1793865747"},{"product_id":"purgador-automatico-condensados","title":"Programmable automatic condensate drain","description":"\u003cp\u003e\u003cstrong\u003eNo more opening the air receiver drain tap.\u003c\/strong\u003e An automatic drain that removes condensed water from air receivers and compressed air networks without anyone having to remember. You set the frequency and duration of the drain cycles to get the water out without wasting air.\u003c\/p\u003e\n\u003cp\u003eAvailable with \u003cstrong\u003e1\/4\"\u003c\/strong\u003e or \u003cstrong\u003e1\/2\"\u003c\/strong\u003e thread, for fitting directly at the drain point without adaptors. Less water in the installation means less rust, longer-lasting tools and flawless paint finishes.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAutomatic draining:\u003c\/strong\u003e the water comes out by itself, nothing forgotten.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProgrammable:\u003c\/strong\u003e adjustable drain frequency and duration.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSaves air:\u003c\/strong\u003e short drain cycles at just the right frequency.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo threads:\u003c\/strong\u003e 1\/4\" or 1\/2\", no adaptors needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAir receivers on piston and screw compressors.\u003c\/li\u003e\n\u003cli\u003eLow points in compressed air networks.\u003c\/li\u003e\n\u003cli\u003eFilter bowls, dryers and auxiliary tanks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to programme it\u003c\/h3\u003e\n\u003cp\u003eStart with frequent, short drain cycles and watch how much water comes out. If only air comes out on each cycle, lengthen the interval; if you see water building up between cycles, shorten it. More water condenses in summer or in humid environments, so review the setting when the seasons change. Fine-tuning gives you dry air with the minimum use of compressed air. That way the air receiver does not collect water even when the compressor runs for many hours.\u003c\/p\u003e\n\u003ch3\u003eTechnical features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e programmable automatic drain\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThread:\u003c\/strong\u003e 1\/4\" · 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSettings:\u003c\/strong\u003e drain frequency and duration\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReferences:\u003c\/strong\u003e CA-PA1-4 · CA-PA1-2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVetonek tip:\u003c\/strong\u003e fit a shut-off valve upstream of the drain so you can clean it without emptying the tank. More water condenses in summer: shorten the interval between drain cycles.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhere is it installed?\u003c\/h3\u003e\n\u003cp\u003eAt the lowest point of the air receiver or air network.\u003c\/p\u003e\n\u003ch3\u003eWhich thread should I choose?\u003c\/h3\u003e\n\u003cp\u003eThe one that matches the drain port on your air receiver or installation: 1\/4\" or 1\/2\".\u003c\/p\u003e\n\u003ch3\u003eWhat can be programmed?\u003c\/h3\u003e\n\u003cp\u003eThe frequency and duration of the drain cycles.\u003c\/p\u003e\n\u003ch3\u003eDoes it waste a lot of air?\u003c\/h3\u003e\n\u003cp\u003eNo, by adjusting frequency and duration you only drain what is necessary.\u003c\/p\u003e\n\u003ch3\u003eHow do I maintain it?\u003c\/h3\u003e\n\u003cp\u003eFit a shut-off valve upstream and clean it from time to time without having to empty the air receiver.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Where is it installed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"At the lowest point of the air receiver or air network.\"}},{\"@type\":\"Question\",\"name\":\"Which thread should I choose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The one that matches the drain port on your air receiver or installation: 1\/4\\\" or 1\/2\\\".\"}},{\"@type\":\"Question\",\"name\":\"What can be programmed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The frequency and duration of the drain cycles.\"}},{\"@type\":\"Question\",\"name\":\"Does it waste a lot of air?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, by adjusting frequency and duration you only drain what is necessary.\"}},{\"@type\":\"Question\",\"name\":\"How do I maintain it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Fit a shut-off valve upstream and clean it from time to time without having to empty the air receiver.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"1\/4\"","offer_id":54641447207259,"sku":"CEVIK-CA-PA1-4","price":53.9,"currency_code":"EUR","in_stock":true},{"title":"1\/2\"","offer_id":54641447240027,"sku":"CEVIK-CA-PA1-2","price":53.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/purgador-automatico-condensados-vica-work-2.jpg?v=1793865767"},{"product_id":"racor-rapido-push-in-tubo-8-mm","title":"Push-in quick fitting for 8 mm tube","description":"\u003cp\u003e\u003cstrong\u003ePneumatic connections that fit in a single movement and do not leak.\u003c\/strong\u003e On machines, whip hoses and small installations, screwing and unscrewing every joint is slow and ends up leaking. These push-in fittings for Ø 8 mm pneumatic tube work differently: the tube is pushed in to connect and released by pressing the collet. No tools, no clamps and no PTFE tape on the tube side.\u003c\/p\u003e\u003cp\u003eThe range covers almost any installation: straight fittings with 1\/8\" or 1\/4\" BSPT tapered male thread, a 1\/4\" male elbow in technopolymer, intermediate elbow, T and Y connectors between tubes, and long-body fittings with O-ring in 1\/8\" or 1\/4\". Ideal for automation, machinery and low-flow air networks.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant fitting:\u003c\/strong\u003e push the tube in to connect, press the collet to release.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight formats:\u003c\/strong\u003e straight, elbow, T, Y and long body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBSPT tapered thread:\u003c\/strong\u003e on the straight male fittings, for reliable sealing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime saving:\u003c\/strong\u003e tube changes and repairs in seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eØ 8 mm pneumatic tube whip hoses and networks.\u003c\/li\u003e\n\u003cli\u003eConnecting cylinders, valves and automation equipment.\u003c\/li\u003e\n\u003cli\u003eBranches and changes of direction between tubes (elbow, T and Y).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube:\u003c\/strong\u003e Ø 8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight male:\u003c\/strong\u003e 1\/8\" and 1\/4\" BSPT tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMale elbow:\u003c\/strong\u003e 1\/4\", technopolymer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermediate connectors:\u003c\/strong\u003e elbow, T and Y between 8 mm tubes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong body:\u003c\/strong\u003e 1\/8\" and 1\/4\" with O-ring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eCut the tube with a tube cutter, straight and burr-free, and push it in as far as it will go: that way the fitting seals without leaks. To remove it, first push the tube inwards, then press the collet while pulling.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow is the tube released?\u003c\/h3\u003e\u003cp\u003ePush the fitting's collet inwards and pull the tube out.\u003c\/p\u003e\u003ch3\u003eIs it suitable for 6 or 10 mm tube?\u003c\/h3\u003e\u003cp\u003eNo, these fittings are for tube with an 8 mm external diameter.\u003c\/p\u003e\u003ch3\u003eDo I need to use PTFE tape?\u003c\/h3\u003e\u003cp\u003eNot on the tube side. On the male thread, if it does not have pre-applied sealant, apply PTFE tape or thread sealant.\u003c\/p\u003e\u003ch3\u003eWhat are the long-body fittings for?\u003c\/h3\u003e\u003cp\u003eFor connecting to cylinders and equipment where the thread is more recessed; they have an O-ring for sealing.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between T and Y?\u003c\/h3\u003e\u003cp\u003eBoth split one tube into two, but the T takes the outlets off at a right angle and the Y at an open angle.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How is the tube released?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Push the fitting's collet inwards and pull the tube out.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for 6 or 10 mm tube?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, these fittings are for tube with an 8 mm external diameter.\"}},{\"@type\":\"Question\",\"name\":\"Do I need to use PTFE tape?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not on the tube side. On the male thread, if it does not have pre-applied sealant, apply PTFE tape or thread sealant.\"}},{\"@type\":\"Question\",\"name\":\"What are the long-body fittings for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For connecting to cylinders and equipment where the thread is more recessed; they have an O-ring for sealing.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between T and Y?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Both split one tube into two, but the T takes the outlets off at a right angle and the Y at an open angle.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Straight male 1\/8\"","offer_id":54641448190299,"sku":"CEVIK-CA-RM6033-7","price":2.65,"currency_code":"EUR","in_stock":true},{"title":"Straight male 1\/4\"","offer_id":54641448223067,"sku":"CEVIK-CA-RM6033-8","price":2.65,"currency_code":"EUR","in_stock":true},{"title":"Male elbow 1\/4\"","offer_id":54641448255835,"sku":"CEVIK-CA-RT6101-8","price":2.55,"currency_code":"EUR","in_stock":true},{"title":"Elbow connector","offer_id":54641448288603,"sku":"CEVIK-CA-RT6115-3","price":2.55,"currency_code":"EUR","in_stock":true},{"title":"T connector","offer_id":54641448321371,"sku":"CEVIK-CA-RT6116-3","price":2.84,"currency_code":"EUR","in_stock":true},{"title":"Y connector","offer_id":54641448354139,"sku":"CEVIK-CA-RT6117-3","price":2.84,"currency_code":"EUR","in_stock":true},{"title":"Long body 1\/8\"","offer_id":54641448386907,"sku":"CEVIK-CA-RM6039-5","price":5.04,"currency_code":"EUR","in_stock":true},{"title":"Long body 1\/4\"","offer_id":54641448419675,"sku":"CEVIK-CA-RM6039-6","price":5.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/racor-rapido-push-in-tubo-8-mm-vica-work-1.jpg?v=1793865804"},{"product_id":"conexion-rapida-macho-enchufe-universal","title":"Male quick connector for universal coupler","description":"\u003cp\u003e\u003cstrong\u003eConnect and disconnect your air tools in a second, with no spanners and no leaks.\u003c\/strong\u003e The male quick connector is the part fitted to the tool or hose so it can be plugged into the compressor's universal quick coupler. With it you can switch between a spray gun, impact wrench or blow gun in an instant, without tools and without losing air.\u003c\/p\u003e\u003cp\u003eAvailable with a hose tail for 6 or 8 mm hose (push the hose all the way on and secure it with a clamp) or with a 1\/4\" or 3\/8\" male or female thread, so you can adapt it to any tool, regulator or hose in your workshop.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal profile:\u003c\/strong\u003e the most widespread on workshop compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstant tool changes:\u003c\/strong\u003e just plug in and go.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix versions:\u003c\/strong\u003e 6 or 8 mm hose tail, 1\/4\" and 3\/8\" female thread or male thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirtight connection:\u003c\/strong\u003e no air loss when correctly fitted.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFitting air tools for the universal coupler.\u003c\/li\u003e\n\u003cli\u003eFitting the end of a 6 or 8 mm hose.\u003c\/li\u003e\n\u003cli\u003eStandardising all workshop connections on the same profile.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose tail:\u003c\/strong\u003e hose with 6 mm or 8 mm internal diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFemale thread:\u003c\/strong\u003e 1\/4\" · 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMale thread:\u003c\/strong\u003e 1\/4\" · 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e compressed air\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eStandardise all workshop connections on the same universal profile: that way any tool fits any hose. On the hose tail versions, use a clamp and check that the hose goes all the way on.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs it compatible with my compressor?\u003c\/h3\u003e\u003cp\u003eYes, if your quick coupler has the universal profile, the most common on workshop compressors.\u003c\/p\u003e\u003ch3\u003eDo I need to use PTFE tape?\u003c\/h3\u003e\u003cp\u003eYes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\u003c\/p\u003e\u003ch3\u003eWhich version should I choose?\u003c\/h3\u003e\u003cp\u003eHose tail if it goes on the end of a hose; male or female thread if it goes on a tool, regulator or threaded accessory.\u003c\/p\u003e\u003ch3\u003eWhat is the difference from the quick coupler?\u003c\/h3\u003e\u003cp\u003eThe quick connector is the male part fitted to the tool; the coupler is the female part it plugs into.\u003c\/p\u003e\u003ch3\u003eHow do I know my tool's thread size?\u003c\/h3\u003e\u003cp\u003eMost workshop air tools have a 1\/4\" inlet; higher-consumption tools may use 3\/8\". Check the tool's manual.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is it compatible with my compressor?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, if your quick coupler has the universal profile, the most common on workshop compressors.\"}},{\"@type\":\"Question\",\"name\":\"Do I need to use PTFE tape?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\"}},{\"@type\":\"Question\",\"name\":\"Which version should I choose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Hose tail if it goes on the end of a hose; male or female thread if it goes on a tool, regulator or threaded accessory.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference from the quick coupler?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The quick connector is the male part fitted to the tool; the coupler is the female part it plugs into.\"}},{\"@type\":\"Question\",\"name\":\"How do I know my tool's thread size?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Most workshop air tools have a 1\/4\\\" inlet; higher-consumption tools may use 3\/8\\\". Check the tool's manual.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Hose tail 6 mm","offer_id":54641448780123,"sku":"CEVIK-CA-445\/3","price":2.21,"currency_code":"EUR","in_stock":true},{"title":"Hose tail 8 mm","offer_id":54641448812891,"sku":"CEVIK-CA-445\/4","price":1.91,"currency_code":"EUR","in_stock":true},{"title":"Female thread 1\/4\"","offer_id":54641448845659,"sku":"CEVIK-CA-449\/2","price":1.91,"currency_code":"EUR","in_stock":true},{"title":"Female thread 3\/8\"","offer_id":54641448878427,"sku":"CEVIK-CA-449\/7","price":3.23,"currency_code":"EUR","in_stock":true},{"title":"Male thread 1\/4\"","offer_id":54641448911195,"sku":"CEVIK-CA-450\/2","price":1.91,"currency_code":"EUR","in_stock":true},{"title":"Male thread 3\/8\"","offer_id":54641448943963,"sku":"CEVIK-CA-450\/7","price":3.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/conexion-rapida-macho-enchufe-universal-vica-work-1.jpg?v=1793865833"},{"product_id":"enchufe-rapido-universal-aire-comprimido","title":"Universal quick coupler for compressed air","description":"\u003cp\u003e\u003cstrong\u003eConnect and disconnect tools and hoses instantly, and stop losing air through old couplers.\u003c\/strong\u003e The quick coupler is the female coupling that tools and hoses plug into: it connects and disconnects without tools and shuts off the air when released. A leaking coupler means air, energy and money escaping every time the compressor starts.\u003c\/p\u003e\u003cp\u003eUniversal profile, with a hose tail for 6, 8 or 10 mm hose or with a 1\/4\", 3\/8\" and 1\/2\" male or female thread to fit on the compressor, regulator or air network. According to the manufacturer, it is made of stainless steel, resistant to corrosion from the moisture in compressed air.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal profile:\u003c\/strong\u003e the most widespread on workshop compressors and tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic shut-off:\u003c\/strong\u003e cuts off the air when the tool is disconnected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNine versions:\u003c\/strong\u003e 6, 8 or 10 mm hose tail and 1\/4\", 3\/8\" and 1\/2\" male or female threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel:\u003c\/strong\u003e corrosion-resistant, according to the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing the outlet coupler on the compressor or regulator.\u003c\/li\u003e\n\u003cli\u003eInstalling air outlets on the workshop network.\u003c\/li\u003e\n\u003cli\u003eFitting the end of a hose for connecting tools.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose tail:\u003c\/strong\u003e 6, 8 or 10 mm hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFemale thread:\u003c\/strong\u003e 1\/4\" · 3\/8\" · 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMale thread:\u003c\/strong\u003e 1\/4\" · 3\/8\" · 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e stainless steel (according to the manufacturer)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eCheck the internal seal from time to time and put a drop of oil on the mechanism: a leaking coupler is air (and money) you are losing. If you use long hoses or heavy tools, consider the anti-disconnect safety version.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat is the difference from the quick connector?\u003c\/h3\u003e\u003cp\u003eThe coupler is the female part (on the compressor or hose) and the quick connector is the male part fitted to the tool.\u003c\/p\u003e\u003ch3\u003eDo I need to use PTFE tape?\u003c\/h3\u003e\u003cp\u003eYes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\u003c\/p\u003e\u003ch3\u003eWhich version should I choose?\u003c\/h3\u003e\u003cp\u003eHose tail for the end of a 6, 8 or 10 mm hose; male or female thread for the compressor, regulator or air network.\u003c\/p\u003e\u003ch3\u003eIs it compatible with my tools?\u003c\/h3\u003e\u003cp\u003eYes, if they have a universal-profile male quick connector, the most common in workshops.\u003c\/p\u003e\u003ch3\u003eWhy is my coupler leaking?\u003c\/h3\u003e\u003cp\u003eUsually because the internal seal is worn or dirty, or a thread has been poorly sealed. If the body is damaged, it is best to replace it.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is the difference from the quick connector?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The coupler is the female part (on the compressor or hose) and the quick connector is the male part fitted to the tool.\"}},{\"@type\":\"Question\",\"name\":\"Do I need to use PTFE tape?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\"}},{\"@type\":\"Question\",\"name\":\"Which version should I choose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Hose tail for the end of a 6, 8 or 10 mm hose; male or female thread for the compressor, regulator or air network.\"}},{\"@type\":\"Question\",\"name\":\"Is it compatible with my tools?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, if they have a universal-profile male quick connector, the most common in workshops.\"}},{\"@type\":\"Question\",\"name\":\"Why is my coupler leaking?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Usually because the internal seal is worn or dirty, or a thread has been poorly sealed. If the body is damaged, it is best to replace it.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Hose tail 6 mm","offer_id":54641449337179,"sku":"CEVIK-CA-456\/1","price":7.5,"currency_code":"EUR","in_stock":true},{"title":"Hose tail 8 mm","offer_id":54641449369947,"sku":"CEVIK-CA-456\/2","price":5.0,"currency_code":"EUR","in_stock":true},{"title":"Hose tail 10 mm","offer_id":54641449402715,"sku":"CEVIK-CA-456\/3","price":6.12,"currency_code":"EUR","in_stock":true},{"title":"Female thread 1\/4\"","offer_id":54641449435483,"sku":"CEVIK-CA-459\/1","price":5.0,"currency_code":"EUR","in_stock":true},{"title":"Female thread 3\/8\"","offer_id":54641449468251,"sku":"CEVIK-CA-459\/2","price":5.73,"currency_code":"EUR","in_stock":true},{"title":"Female thread 1\/2\"","offer_id":54641449501019,"sku":"CEVIK-CA-459\/3","price":7.99,"currency_code":"EUR","in_stock":true},{"title":"Male thread 1\/4\"","offer_id":54641449533787,"sku":"CEVIK-CA-460\/1","price":5.0,"currency_code":"EUR","in_stock":true},{"title":"Male thread 3\/8\"","offer_id":54641449566555,"sku":"CEVIK-CA-460\/2","price":6.03,"currency_code":"EUR","in_stock":true},{"title":"Male thread 1\/2\"","offer_id":54641449599323,"sku":"CEVIK-CA-460\/3","price":6.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/enchufe-rapido-universal-aire-comprimido-vica-work-2.jpg?v=1793865871"},{"product_id":"enchufe-rapido-universal-seguridad","title":"Universal safety quick coupler with anti-disconnect lock","description":"\u003cp\u003e\u003cstrong\u003eWork with pressurised air without worrying about the hose shooting off.\u003c\/strong\u003e An accidental disconnection at 8 bar turns the hose into a whip that can strike anyone. This is the safety version of the universal quick coupler: its locking mechanism stops the tool or hose from suddenly coming loose if pulled, and reduces leaks and hose whip.\u003c\/p\u003e\u003cp\u003eAvailable with a hose tail for 8 mm hose, or with a 1\/4\" and 3\/8\" female thread or a 1\/4\", 3\/8\" and 1\/2\" male thread, to fit on the compressor, regulator, air network or the end of the hose.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-disconnect lock:\u003c\/strong\u003e the connection does not come loose from an accidental tug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess hose whip:\u003c\/strong\u003e greater safety for you and for anyone working nearby.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal profile:\u003c\/strong\u003e accepts universal male quick connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix versions:\u003c\/strong\u003e 8 mm hose tail, 1\/4\" and 3\/8\" female thread, 1\/4\", 3\/8\" and 1\/2\" male thread.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLong hoses and heavy tools, such as impact wrenches or high-consumption guns.\u003c\/li\u003e\n\u003cli\u003eWorkshops with several operators and shared air outlets.\u003c\/li\u003e\n\u003cli\u003eReplacing standard couplers with a safer version.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfile:\u003c\/strong\u003e universal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e lock against accidental disconnection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose tail:\u003c\/strong\u003e 8 mm hose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFemale thread:\u003c\/strong\u003e 1\/4\" · 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMale thread:\u003c\/strong\u003e 1\/4\" · 3\/8\" · 1\/2\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eWith long hoses and heavy tools, the safety coupler is the best investment: a disconnection at 8 bar can make the hose whip around. Check the internal seal from time to time and apply a drop of oil to the mechanism.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs it compatible with universal connectors?\u003c\/h3\u003e\u003cp\u003eYes, it accepts universal-profile male quick connectors.\u003c\/p\u003e\u003ch3\u003eDo I need to use PTFE tape?\u003c\/h3\u003e\u003cp\u003eYes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\u003c\/p\u003e\u003ch3\u003eWhat is the difference from a standard coupler?\u003c\/h3\u003e\u003cp\u003eThe safety version has a lock that stops the connection from suddenly coming loose if pulled, preventing hose whip.\u003c\/p\u003e\u003ch3\u003eWhich version should I choose?\u003c\/h3\u003e\u003cp\u003eHose tail if it goes on the end of an 8 mm hose; male or female thread if it goes on the compressor, regulator or air network.\u003c\/p\u003e\u003ch3\u003eWhere is it most recommended?\u003c\/h3\u003e\u003cp\u003eOn long hoses, hose reels and heavy or high-consumption tools, where a disconnection would be more dangerous.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is it compatible with universal connectors?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, it accepts universal-profile male quick connectors.\"}},{\"@type\":\"Question\",\"name\":\"Do I need to use PTFE tape?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference from a standard coupler?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The safety version has a lock that stops the connection from suddenly coming loose if pulled, preventing hose whip.\"}},{\"@type\":\"Question\",\"name\":\"Which version should I choose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Hose tail if it goes on the end of an 8 mm hose; male or female thread if it goes on the compressor, regulator or air network.\"}},{\"@type\":\"Question\",\"name\":\"Where is it most recommended?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"On long hoses, hose reels and heavy or high-consumption tools, where a disconnection would be more dangerous.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Hose tail 8 mm","offer_id":54641449828699,"sku":"CEVIK-CA-466\/2","price":18.52,"currency_code":"EUR","in_stock":true},{"title":"Female thread 1\/4\"","offer_id":54641449861467,"sku":"CEVIK-CA-469\/1","price":18.52,"currency_code":"EUR","in_stock":true},{"title":"Female thread 3\/8\"","offer_id":54641449894235,"sku":"CEVIK-CA-469\/2","price":18.52,"currency_code":"EUR","in_stock":true},{"title":"Male thread 1\/4\"","offer_id":54641449927003,"sku":"CEVIK-CA-470\/1","price":18.52,"currency_code":"EUR","in_stock":true},{"title":"Male thread 3\/8\"","offer_id":54641449959771,"sku":"CEVIK-CA-470\/2","price":18.52,"currency_code":"EUR","in_stock":true},{"title":"Male thread 1\/2\"","offer_id":54641449992539,"sku":"CEVIK-CA-470\/3","price":18.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/enchufe-rapido-universal-seguridad-vica-work-1.jpg?v=1793865900"},{"product_id":"regulador-presion-manometro-enchufe-rapido","title":"Pressure regulator with gauge and quick coupler","description":"\u003cp\u003e\u003cstrong\u003eThe exact pressure, right at the tool.\u003c\/strong\u003e A \u003cstrong\u003e0 to 12 bar\u003c\/strong\u003e regulator with direct-reading gauge and 1\/4\" universal female quick coupler. You set the pressure at the point of use, regardless of hose length or what other outlets are consuming.\u003c\/p\u003e\n\u003cp\u003eVery useful for spray guns, nailers and pressure-sensitive tools, where one bar more or less changes the result.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment at the point of use:\u003c\/strong\u003e precise pressure at the tool.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePressure gauge:\u003c\/strong\u003e real-time reading.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1\/4\" quick coupler:\u003c\/strong\u003e universal female connection.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompact:\u003c\/strong\u003e fits between hose and tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpray guns and airbrushes.\u003c\/li\u003e\n\u003cli\u003ePneumatic nailers and staplers.\u003c\/li\u003e\n\u003cli\u003eTools that need a specific pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003cp\u003eConnect the regulator to the tool inlet or the hose outlet, run the tool and turn the knob until the gauge shows the pressure recommended by the tool manufacturer. For painting, set the pressure and do a test pass on a piece of cardboard before you start: you will see straight away whether the atomisation is right. Check the gauge again if you change hose or tool. Correct adjustment saves air, material and touch-ups.\u003c\/p\u003e\n\u003ch3\u003eTechnical features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment range:\u003c\/strong\u003e 0-12 bar\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePressure gauge:\u003c\/strong\u003e yes, real-time reading\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e 1\/4\" universal female quick coupler\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReference:\u003c\/strong\u003e CA-970PRO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVetonek tip:\u003c\/strong\u003e set the pressure with the tool connected and running, not with no flow: that way you see the actual working pressure. For painting, adjust and do a test pass before you start.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhere is it fitted?\u003c\/h3\u003e\n\u003cp\u003eBetween the hose and the tool, or at the compressor outlet.\u003c\/p\u003e\n\u003ch3\u003eWhat is it for if the compressor already has a regulator?\u003c\/h3\u003e\n\u003cp\u003eTo set the pressure at the point of use, regardless of hose length or other air consumers.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure range does it have?\u003c\/h3\u003e\n\u003cp\u003eFrom 0 to 12 bar.\u003c\/p\u003e\n\u003ch3\u003eWhat connection does it have?\u003c\/h3\u003e\n\u003cp\u003e1\/4\" universal female quick coupler.\u003c\/p\u003e\n\u003ch3\u003eWhich tools is it useful for?\u003c\/h3\u003e\n\u003cp\u003eAbove all for spray guns, nailers and pressure-sensitive tools.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Where is it fitted?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Between the hose and the tool, or at the compressor outlet.\"}},{\"@type\":\"Question\",\"name\":\"What is it for if the compressor already has a regulator?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"To set the pressure at the point of use, regardless of hose length or other air consumers.\"}},{\"@type\":\"Question\",\"name\":\"What pressure range does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"From 0 to 12 bar.\"}},{\"@type\":\"Question\",\"name\":\"What connection does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"1\/4\\\" universal female quick coupler.\"}},{\"@type\":\"Question\",\"name\":\"Which tools is it useful for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Above all for spray guns, nailers and pressure-sensitive tools.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641450385755,"sku":"CEVIK-CA-970PRO","price":14.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/regulador-presion-manometro-enchufe-rapido-vica-work-1.jpg?v=1793865924"},{"product_id":"lubricador-aire-herramienta-neumatica","title":"Air lubricator for pneumatic tools","description":"\u003cp\u003e\u003cstrong\u003ePneumatic tools that last for years, not months.\u003c\/strong\u003e This lubricator injects a fine oil mist into the air going to the tool, so that impact wrenches, drills or grinders always work lubricated, with less internal wear and more consistent power.\u003c\/p\u003e\n\u003cp\u003e1\/4\" version with 42 cc bowl (0-12 bar) or 3\/8\" and 1\/2\" version with 68 cc bowl (0-16 bar, up to 60 °C), both with adjustable oil flow.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eConstant lubrication:\u003c\/strong\u003e no need to remember to oil by hand.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustable oil flow:\u003c\/strong\u003e dose it to suit the tool.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo sizes:\u003c\/strong\u003e 42 cc or 68 cc bowl.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLonger service life:\u003c\/strong\u003e less wear on air motors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWorkstations with impact wrenches, drills and pneumatic grinders.\u003c\/li\u003e\n\u003cli\u003eMechanical and tyre workshops.\u003c\/li\u003e\n\u003cli\u003ePneumatic machinery that needs lubricated air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to adjust it\u003c\/h3\u003e\n\u003cp\u003eFill the bowl with pneumatic tool oil and set the drip rate with the tool running: a few drops per minute is enough for most tools. Too much oil does not lubricate any better; it just dirties the workpiece and the work area. Check the bowl level at the start of each day and top it up before it runs completely empty.\u003c\/p\u003e\n\u003ch3\u003eTechnical features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1\/4\":\u003c\/strong\u003e female thread, 42 cc bowl, 0-12 bar\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3\/8\" and 1\/2\":\u003c\/strong\u003e female thread, 68 cc bowl, 0-16 bar, max. 60 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment:\u003c\/strong\u003e adjustable oil flow\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReferences:\u003c\/strong\u003e CA-921 · CA-929\/12\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVetonek tip:\u003c\/strong\u003e do not fit a lubricator on the paint line: the oil would spoil the finish. Always use dedicated pneumatic tool oil and set the drip rate to the minimum the tool needs.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat oil should I use?\u003c\/h3\u003e\n\u003cp\u003eLight oil specifically for pneumatic tools.\u003c\/p\u003e\n\u003ch3\u003eWhere is it installed?\u003c\/h3\u003e\n\u003cp\u003eAfter the filter and regulator, as close to the tool as possible.\u003c\/p\u003e\n\u003ch3\u003eWhat is the bowl capacity?\u003c\/h3\u003e\n\u003cp\u003e42 cc on the 1\/4\" version and 68 cc on the 3\/8\" and 1\/2\" version.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with a spray gun?\u003c\/h3\u003e\n\u003cp\u003eNo, the oil would spoil the finish; for painting, use a line without a lubricator.\u003c\/p\u003e\n\u003ch3\u003eCan the amount of oil be adjusted?\u003c\/h3\u003e\n\u003cp\u003eYes, the oil flow is adjustable.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What oil should I use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Light oil specifically for pneumatic tools.\"}},{\"@type\":\"Question\",\"name\":\"Where is it installed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"After the filter and regulator, as close to the tool as possible.\"}},{\"@type\":\"Question\",\"name\":\"What is the bowl capacity?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"42 cc on the 1\/4\\\" version and 68 cc on the 3\/8\\\" and 1\/2\\\" version.\"}},{\"@type\":\"Question\",\"name\":\"Can I use it with a spray gun?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, the oil would spoil the finish; for painting, use a line without a lubricator.\"}},{\"@type\":\"Question\",\"name\":\"Can the amount of oil be adjusted?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, the oil flow is adjustable.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"1\/4\" · 42 cc","offer_id":54641450647899,"sku":"CEVIK-CA-921","price":28.42,"currency_code":"EUR","in_stock":true},{"title":"3\/8\" and 1\/2\" · 68 cc","offer_id":54641450680667,"sku":"CEVIK-CA-929\/12","price":45.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/lubricador-aire-herramienta-neumatica-vica-work-1.jpg?v=1793865947"},{"product_id":"mini-lubricador-linea-1-4","title":"1\/4\" male-female mini in-line lubricator","description":"\u003cp\u003e\u003cstrong\u003eLubrication right where it is needed, without fitting an FRL.\u003c\/strong\u003e A compact mini lubricator that screws directly into the tool inlet (\u003cstrong\u003e1\/4\" male - 1\/4\" female\u003c\/strong\u003e). It lubricates constantly every time you work and its transparent reservoir shows you at a glance when it needs refilling.\u003c\/p\u003e\n\u003cp\u003eWith a brass body and only 55 mm long, it adds hardly any weight or bulk to the tool: perfect for impact wrenches, ratchets or pneumatic drills used far from the compressor.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDirect fitting:\u003c\/strong\u003e screws into the tool inlet.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCompact:\u003c\/strong\u003e 55 mm long.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBrass body:\u003c\/strong\u003e tough and durable.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTransparent reservoir:\u003c\/strong\u003e oil level always in view.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eImpact wrenches, ratchets and pneumatic drills.\u003c\/li\u003e\n\u003cli\u003eTools working far from the FRL unit.\u003c\/li\u003e\n\u003cli\u003eMechanical, tyre and maintenance workshops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy use a mini lubricator\u003c\/h3\u003e\n\u003cp\u003eWhen the tool works far from the FRL unit, hardly any oil mist reaches its motor. With the mini lubricator screwed into the inlet itself, lubrication happens right where it is needed, even with long hoses. Check the level often and top it up with dedicated pneumatic tool oil so the tool always runs smoothly. It is an economical way to bring lubrication to every tool.\u003c\/p\u003e\n\u003ch3\u003eTechnical features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eThreads:\u003c\/strong\u003e 1\/4\" male - 1\/4\" female\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBody:\u003c\/strong\u003e brass\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReservoir:\u003c\/strong\u003e transparent\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 55 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVetonek tip:\u003c\/strong\u003e fit it following the airflow direction arrow marked on the body and fill it only with pneumatic tool oil. Do not use it on painting or blow-off tools.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat oil does it take?\u003c\/h3\u003e\n\u003cp\u003eDedicated pneumatic tool oil.\u003c\/p\u003e\n\u003ch3\u003eWhere is it fitted?\u003c\/h3\u003e\n\u003cp\u003eAt the tool air inlet, between the tool and the quick coupler.\u003c\/p\u003e\n\u003ch3\u003eWhat threads does it have?\u003c\/h3\u003e\n\u003cp\u003e1\/4\" male at one end and 1\/4\" female at the other.\u003c\/p\u003e\n\u003ch3\u003eHow do I know when to refill it?\u003c\/h3\u003e\n\u003cp\u003eThe reservoir is transparent, so you can see the oil level at a glance.\u003c\/p\u003e\n\u003ch3\u003eDoes the fitting direction matter?\u003c\/h3\u003e\n\u003cp\u003eYes, follow the airflow direction arrow marked on the body.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What oil does it take?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Dedicated pneumatic tool oil.\"}},{\"@type\":\"Question\",\"name\":\"Where is it fitted?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"At the tool air inlet, between the tool and the quick coupler.\"}},{\"@type\":\"Question\",\"name\":\"What threads does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"1\/4\\\" male at one end and 1\/4\\\" female at the other.\"}},{\"@type\":\"Question\",\"name\":\"How do I know when to refill it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The reservoir is transparent, so you can see the oil level at a glance.\"}},{\"@type\":\"Question\",\"name\":\"Does the fitting direction matter?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, follow the airflow direction arrow marked on the body.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641451008347,"sku":"CEVIK-NE-KN8055","price":5.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/mini-lubricador-linea-1-4-vica-work-1.jpg?v=1793865965"},{"product_id":"presostato-trifasico-10-bar-compresor","title":"10 bar three-phase pressure switch for compressors","description":"\u003cp\u003eThe pressure switch is the \u003cb\u003ebrain of the compressor\u003c\/b\u003e: it starts the motor when the pressure drops and stops it when the tank reaches its maximum pressure. If yours doesn't cut out, won't start or has burnt contacts, this is its replacement.\u003c\/p\u003e\n\u003cp\u003eA \u003cb\u003e10 bar three-phase\u003c\/b\u003e pressure switch with built-in \u003cb\u003ethermal protection\u003c\/b\u003e, in three ranges according to motor power: \u003cb\u003e2-3 HP\u003c\/b\u003e, \u003cb\u003e3-5.5 HP\u003c\/b\u003e and \u003cb\u003e4-7.5 HP\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAutomatic control:\u003c\/b\u003e starts and stops the compressor according to pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThermal protection:\u003c\/b\u003e protects the motor against overloads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThree power ranges:\u003c\/b\u003e choose the one that matches your motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10 bar:\u003c\/b\u003e the usual maximum working pressure for workshop compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDirect replacement:\u003c\/b\u003e for three-phase piston compressors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing the faulty pressure switch of a three-phase compressor.\u003c\/li\u003e\n\u003cli\u003eBelt-driven compressors from 2 to 7.5 HP.\u003c\/li\u003e\n\u003cli\u003eBuilding compressors and air units.\u003c\/li\u003e\n\u003cli\u003eCompressor maintenance workshops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 10 bar (145 psi)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRanges:\u003c\/b\u003e 2-3 HP (3-6 A) · 3-5.5 HP (6-10 A) · 4-7.5 HP (10-16 A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProtection:\u003c\/b\u003e built-in thermal\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUnloader valve:\u003c\/b\u003e not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e choose the range by the \u003cb\u003emotor current\u003c\/b\u003e (check its rating plate) and not just by HP. Before touching anything, \u003cb\u003edisconnect the power and drain the tank\u003c\/b\u003e; if you have no experience with three-phase installations, have an electrician fit it.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch3\u003e🔧 How to get the most out of it\u003c\/h3\u003e\n\u003cp\u003eChoose the amp range that matches your motor's rating plate and leave the connection to an electrician.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich model should I choose?\u003c\/h3\u003e\n\u003cp\u003eThe one that matches the power and current of your motor: 2-3 HP (3-6 A), 3-5.5 HP (6-10 A) or 4-7.5 HP (10-16 A).\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for single-phase compressors?\u003c\/h3\u003e\n\u003cp\u003eNo, it is three-phase. For single-phase units we have 4-way pressure switches.\u003c\/p\u003e\n\u003ch3\u003eAt what pressure does it cut out?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for compressors up to 10 bar.\u003c\/p\u003e\n\u003ch3\u003eDoes it have an unloader valve?\u003c\/h3\u003e\n\u003cp\u003eIt does not include an unloader valve.\u003c\/p\u003e\n\u003ch3\u003eCan I install it myself?\u003c\/h3\u003e\n\u003cp\u003eIf you have electrical knowledge, yes; if not, we recommend a professional, as it works at 400 V.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which model should I choose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The one that matches the power and current of your motor: 2-3 HP (3-6 A), 3-5.5 HP (6-10 A) or 4-7.5 HP (10-16 A).\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for single-phase compressors?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, it is three-phase. For single-phase units we have 4-way pressure switches.\"}},{\"@type\":\"Question\",\"name\":\"At what pressure does it cut out?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is designed for compressors up to 10 bar.\"}},{\"@type\":\"Question\",\"name\":\"Does it have an unloader valve?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It does not include an unloader valve.\"}},{\"@type\":\"Question\",\"name\":\"Can I install it myself?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"If you have electrical knowledge, yes; if not, we recommend a professional, as it works at 400 V.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"2-3 HP · 3-6 A","offer_id":54641451532635,"sku":"CEVIK-CA-840\/1","price":77.42,"currency_code":"EUR","in_stock":true},{"title":"3-5.5 HP · 6-10 A","offer_id":54641451565403,"sku":"CEVIK-CA-840\/2","price":77.42,"currency_code":"EUR","in_stock":true},{"title":"4-7.5 HP · 10-16 A","offer_id":54641451598171,"sku":"CEVIK-CA-840\/3","price":77.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/presostato-trifasico-10-bar-compresor-vica-work-1.jpg?v=1793865997"},{"product_id":"presostato-monofasico-4-vias-2-hp","title":"4-way single-phase pressure switch for compressors up to 2 HP","description":"\u003cp\u003eThe pressure switch is the brain of the compressor: it \u003cb\u003estarts and stops the motor\u003c\/b\u003e according to the tank pressure. If yours doesn't cut out, won't start or leaks air through the valve, this \u003cb\u003e4-way single-phase pressure switch\u003c\/b\u003e restores \u003cb\u003eautomatic, safe\u003c\/b\u003e operation to your compressor.\u003c\/p\u003e\n\u003cp\u003eIt is a spare part for \u003cb\u003esingle-phase compressors up to 2 HP\u003c\/b\u003e and \u003cb\u003e8 bar\u003c\/b\u003e, with a \u003cb\u003e4-way\u003c\/b\u003e outlet and an \u003cb\u003eunloader valve\u003c\/b\u003e that releases the pump so the motor starts without strain. There are \u003cb\u003etwo models\u003c\/b\u003e: compare yours with the photos to choose the one that matches.\u003c\/p\u003e\n\u003cp\u003eA pressure switch in good condition protects the motor and tank: it cuts out at the correct pressure, prevents forced starts and extends the life of the whole unit.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAutomatic start and stop:\u003c\/b\u003e controls the motor according to pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e4-way:\u003c\/b\u003e several air connections in a single body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUnloader valve:\u003c\/b\u003e the motor starts unloaded and without strain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUp to 2 HP and 8 bar:\u003c\/b\u003e for single-phase workshop and DIY compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo models:\u003c\/b\u003e choose the one that matches yours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing a faulty pressure switch.\u003c\/li\u003e\n\u003cli\u003eCompressors that won't start or won't cut out.\u003c\/li\u003e\n\u003cli\u003eFixing leaks from the unloader valve.\u003c\/li\u003e\n\u003cli\u003eMaintenance of single-phase compressors up to 2 HP.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e single-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e up to 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 8 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWays:\u003c\/b\u003e 4, with unloader valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModels:\u003c\/b\u003e 871\/1 and 871\/2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e disconnect the compressor and drain the tank before replacing it; use PTFE tape on the thread and tighten without straining the pressure switch body. The electrical connection must be made by a qualified person.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich of the two models do I need?\u003c\/h3\u003e\n\u003cp\u003eCompare the shape, position of the ports and thread with your current pressure switch; if in doubt, send us a photo.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for 3 HP compressors?\u003c\/h3\u003e\n\u003cp\u003eNo, it is designed for single-phase motors up to 2 HP.\u003c\/p\u003e\n\u003ch3\u003eWhat is the maximum pressure?\u003c\/h3\u003e\n\u003cp\u003eUp to 8 bar.\u003c\/p\u003e\n\u003ch3\u003eWhat is the unloader valve for?\u003c\/h3\u003e\n\u003cp\u003eIt releases the air from the pump when it stops so the motor can start again without strain.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for three-phase compressors?\u003c\/h3\u003e\n\u003cp\u003eNo, it is single-phase; for three-phase units there are 10 bar three-phase pressure switches.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which of the two models do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Compare the shape, position of the ports and thread with your current pressure switch; if in doubt, send us a photo.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for 3 HP compressors?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, it is designed for single-phase motors up to 2 HP.\"}},{\"@type\":\"Question\",\"name\":\"What is the maximum pressure?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Up to 8 bar.\"}},{\"@type\":\"Question\",\"name\":\"What is the unloader valve for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It releases the air from the pump when it stops so the motor can start again without strain.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for three-phase compressors?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, it is single-phase; for three-phase units there are 10 bar three-phase pressure switches.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Model 871\/1","offer_id":54641454645595,"sku":"CEVIK-CA-871\/1","price":19.6,"currency_code":"EUR","in_stock":true},{"title":"Model 871\/2","offer_id":54641454678363,"sku":"CEVIK-CA-871\/2","price":14.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/presostato-monofasico-4-vias-2-hp-vica-work-1.jpg?v=1793866027"},{"product_id":"filtro-aspiracion-aire-compresor","title":"Air intake filter for compressors","description":"\u003cp\u003eDust is the silent enemy of any compressor: it gets in through the intake, scores the cylinder and wears the piston rings and valves. The \u003cb\u003eair intake filter\u003c\/b\u003e traps it before it reaches the pump, and a dirty or broken filter \u003cb\u003eshortens the compressor's life and reduces its performance\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eChoose yours by thread and format: \u003cb\u003emetal 1\/4\"\u003c\/b\u003e (with silencer tube) or \u003cb\u003e1\/2\"\u003c\/b\u003e, \u003cb\u003eplastic 1\/2\" with 3\/8\" reducer\u003c\/b\u003e, \u003cb\u003eplastic with long 1\/2\" male neck\u003c\/b\u003e (as on PRO25VX compressors) or with a \u003cb\u003ereplaceable 1\/2\" paper cartridge\u003c\/b\u003e (as on the PRO100VC).\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eProtects the pump:\u003c\/b\u003e stops dust getting into the cylinder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFive versions:\u003c\/b\u003e metal, plastic, long neck or paper cartridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1\/4\", 3\/8\" and 1\/2\" threads:\u003c\/b\u003e for most workshop compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaintains performance:\u003c\/b\u003e a clean filter lets the compressor breathe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInexpensive spare:\u003c\/b\u003e the cheapest way to extend the life of the unit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing a dirty or broken intake filter.\u003c\/li\u003e\n\u003cli\u003eRoutine maintenance of piston compressors.\u003c\/li\u003e\n\u003cli\u003eCompressors on building sites, in joinery shops and dusty environments.\u003c\/li\u003e\n\u003cli\u003eSpare for PRO25VX and PRO100VC compressors, among others.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMetal 1\/4\":\u003c\/b\u003e includes plastic silencer tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMetal 1\/2\":\u003c\/b\u003e metal housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePlastic 1\/2\" and 3\/8\":\u003c\/b\u003e with 3\/8\" reducer included\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLong neck:\u003c\/b\u003e 1\/2\" male thread, plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePaper cartridge:\u003c\/b\u003e 1\/2\" thread, replaceable cartridge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e check the filter every month if you work in a dusty environment (building sites, joinery shops) and replace it as soon as it looks dirty. Never run the compressor without a filter, not even for a short while.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know which one is mine?\u003c\/h3\u003e\n\u003cp\u003eLook at the intake thread (1\/4\", 3\/8\" or 1\/2\") and the shape of your current filter.\u003c\/p\u003e\n\u003ch3\u003eHow often should it be replaced?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the environment; check it frequently and replace it when it is dirty or damaged.\u003c\/p\u003e\n\u003ch3\u003eWhat happens if I run without a filter?\u003c\/h3\u003e\n\u003cp\u003eDust gets into the cylinder and wears the piston rings, valves and cylinder: the compressor loses performance and breaks down sooner.\u003c\/p\u003e\n\u003ch3\u003eWhich filter does the PRO100VC use?\u003c\/h3\u003e\n\u003cp\u003eThe one with a replaceable paper cartridge and 1\/2\" thread.\u003c\/p\u003e\n\u003ch3\u003eAnd the PRO25VX?\u003c\/h3\u003e\n\u003cp\u003eThe plastic one with a long neck and 1\/2\" male thread.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How do I know which one is mine?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Look at the intake thread (1\/4\\\", 3\/8\\\" or 1\/2\\\") and the shape of your current filter.\"}},{\"@type\":\"Question\",\"name\":\"How often should it be replaced?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It depends on the environment; check it frequently and replace it when it is dirty or damaged.\"}},{\"@type\":\"Question\",\"name\":\"What happens if I run without a filter?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Dust gets into the cylinder and wears the piston rings, valves and cylinder: the compressor loses performance and breaks down sooner.\"}},{\"@type\":\"Question\",\"name\":\"Which filter does the PRO100VC use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The one with a replaceable paper cartridge and 1\/2\\\" thread.\"}},{\"@type\":\"Question\",\"name\":\"And the PRO25VX?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The plastic one with a long neck and 1\/2\\\" male thread.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Metal · 1\/4\"","offer_id":54641455694171,"sku":"CEVIK-CA-875\/6","price":9.31,"currency_code":"EUR","in_stock":true},{"title":"Metal · 1\/2\"","offer_id":54641455726939,"sku":"CEVIK-CA-875\/8","price":9.31,"currency_code":"EUR","in_stock":true},{"title":"Plastic · 1\/2\" and 3\/8\"","offer_id":54641455759707,"sku":"CEVIK-CA-875\/5","price":6.37,"currency_code":"EUR","in_stock":true},{"title":"Plastic long neck · 1\/2\"","offer_id":54641455792475,"sku":"CEVIK-CA-PRO25VX-27","price":8.82,"currency_code":"EUR","in_stock":true},{"title":"Paper cartridge · 1\/2\"","offer_id":54641455825243,"sku":"CEVIK-CA-PRO100VC-16","price":9.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/filtro-aspiracion-aire-compresor-vica-work-1.jpg?v=1793866060"},{"product_id":"filtro-purificador-aire-comprimido","title":"20 micron compressed air purifier filter","description":"\u003cp\u003e\u003cstrong\u003eSay goodbye to water in your spray gun and tools.\u003c\/strong\u003e A purifier filter that traps condensed water and particles in compressed air before they reach your tools or spray gun. With a \u003cstrong\u003e20 micron\u003c\/strong\u003e filtration grade, it prevents droplets in the finish, rust in air motors and premature breakdowns.\u003c\/p\u003e\n\u003cp\u003eAvailable with 1\/4\" or 3\/8\" and 1\/2\" female thread (the latter for 0-16 bar and up to 60 °C), for fitting at the air receiver outlet or at the working outlet.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDrier air:\u003c\/strong\u003e traps condensed water.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e20 micron filtration:\u003c\/strong\u003e stops particles and dirt.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo sizes:\u003c\/strong\u003e 1\/4\" or 3\/8\" and 1\/2\" female.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtected tools:\u003c\/strong\u003e less rust and internal wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompressor or air receiver outlet in workshops.\u003c\/li\u003e\n\u003cli\u003ePaint line, before the regulator.\u003c\/li\u003e\n\u003cli\u003eWorkstations with pneumatic tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to install it\u003c\/h3\u003e\n\u003cp\u003eMount it vertically, with the bowl facing down, following the airflow direction arrow. Fit it after the air receiver, some distance from the compressor, so that the air arrives cooler and the water condenses inside the filter rather than in the tools. Check the bowl daily in humid periods and empty it when you see water building up. If you spray paint, fit it before the regulator on the paint outlet.\u003c\/p\u003e\n\u003ch3\u003eTechnical features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFiltration:\u003c\/strong\u003e 20 microns\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThreads:\u003c\/strong\u003e 1\/4\" female · 3\/8\" and 1\/2\" female\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3\/8\" and 1\/2\":\u003c\/strong\u003e 0-16 bar, max. 60 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReferences:\u003c\/strong\u003e CA-919\/12 · CA-920\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVetonek tip:\u003c\/strong\u003e empty the bowl when you see water and mount it vertically, bowl facing down, as far from the compressor as possible so the air arrives already cooled and condenses inside the filter.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes it remove oil too?\u003c\/h3\u003e\n\u003cp\u003eIt traps water and particles; for high-quality paintwork, combine it with a coalescing filter.\u003c\/p\u003e\n\u003ch3\u003eWhere is it installed?\u003c\/h3\u003e\n\u003cp\u003eAt the air receiver outlet or before the regulator on the working outlet.\u003c\/p\u003e\n\u003ch3\u003eWhat filtration grade does it have?\u003c\/h3\u003e\n\u003cp\u003e20 microns.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure does it take?\u003c\/h3\u003e\n\u003cp\u003eThe 3\/8\" and 1\/2\" version works from 0 to 16 bar and up to 60 °C.\u003c\/p\u003e\n\u003ch3\u003eHow is it fitted?\u003c\/h3\u003e\n\u003cp\u003eVertically, with the bowl facing down, following the airflow direction and draining the bowl when water builds up.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Does it remove oil too?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It traps water and particles; for high-quality paintwork, combine it with a coalescing filter.\"}},{\"@type\":\"Question\",\"name\":\"Where is it installed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"At the air receiver outlet or before the regulator on the working outlet.\"}},{\"@type\":\"Question\",\"name\":\"What filtration grade does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"20 microns.\"}},{\"@type\":\"Question\",\"name\":\"What pressure does it take?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The 3\/8\\\" and 1\/2\\\" version works from 0 to 16 bar and up to 60 °C.\"}},{\"@type\":\"Question\",\"name\":\"How is it fitted?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Vertically, with the bowl facing down, following the airflow direction and draining the bowl when water builds up.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"1\/4\"","offer_id":54641456218459,"sku":"CEVIK-CA-920","price":26.46,"currency_code":"EUR","in_stock":true},{"title":"3\/8\" and 1\/2\"","offer_id":54641456251227,"sku":"CEVIK-CA-919\/12","price":47.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/filtro-purificador-aire-comprimido-vica-work-1.jpg?v=1793866083"},{"product_id":"filtro-regulador-presion-manometro","title":"Pressure filter regulator with gauge","description":"\u003cp\u003e\u003cstrong\u003eTwo functions in a single unit: dry air and exact pressure.\u003c\/strong\u003e This filter regulator removes the water that condenses in the air receiver and regulates the outlet pressure, which you can read instantly on the gauge. Fewer parts in the installation, fewer leaks and tools working at the pressure they need.\u003c\/p\u003e\n\u003cp\u003e1\/4\" version with flow up to 240 l\/min and adjustment from 0 to 12 bar, or 3\/8\" and 1\/2\" female version with 450 l\/min, 12 bar and up to 60 °C.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFilter + regulator:\u003c\/strong\u003e a single compact unit.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGauge included:\u003c\/strong\u003e direct reading of the working pressure.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo flow rates:\u003c\/strong\u003e 240 or 450 l\/min.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo lubrication:\u003c\/strong\u003e also suitable for paint lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompressor outlet in workshops and garages.\u003c\/li\u003e\n\u003cli\u003eWorking outlets with pneumatic tools.\u003c\/li\u003e\n\u003cli\u003eSpray guns that need dry, oil-free air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to adjust it\u003c\/h3\u003e\n\u003cp\u003eMount the filter regulator vertically, with the bowl facing down and following the airflow direction. To set the pressure, connect the tool, run it and turn the knob until the gauge shows the pressure recommended by the tool manufacturer. Drain the filter bowl frequently so that water does not pass into the line. Dry air at the right pressure extends the life of any pneumatic tool.\u003c\/p\u003e\n\u003ch3\u003eTechnical features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1\/4\":\u003c\/strong\u003e 0-12 bar adjustment, up to 240 l\/min\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3\/8\" and 1\/2\":\u003c\/strong\u003e female thread, 12 bar, 450 l\/min, max. 60 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e pressure gauge\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReferences:\u003c\/strong\u003e CA-922 · CA-940\/12\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVetonek tip:\u003c\/strong\u003e choose the flow rate for your most air-hungry tool: for impact wrenches or sanders, the 3\/8\" and 1\/2\" version is the better choice. Drain the bowl often so that water does not get back into the line.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow is it different from an FRL?\u003c\/h3\u003e\n\u003cp\u003eAn FRL adds a lubricator; this filter regulator does not add oil, which is why it is also suitable for painting.\u003c\/p\u003e\n\u003ch3\u003eWhere is it installed?\u003c\/h3\u003e\n\u003cp\u003eAt the compressor outlet or at each working outlet.\u003c\/p\u003e\n\u003ch3\u003eWhat flow rate does it have?\u003c\/h3\u003e\n\u003cp\u003eUp to 240 l\/min for the 1\/4\" version and 450 l\/min for the 3\/8\" and 1\/2\" version.\u003c\/p\u003e\n\u003ch3\u003eUp to what pressure does it regulate?\u003c\/h3\u003e\n\u003cp\u003eUp to 12 bar; the 1\/4\" version regulates from 0 to 12 bar.\u003c\/p\u003e\n\u003ch3\u003eDoes it include a gauge?\u003c\/h3\u003e\n\u003cp\u003eYes, both versions include a gauge to show the outlet pressure.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How is it different from an FRL?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"An FRL adds a lubricator; this filter regulator does not add oil, which is why it is also suitable for painting.\"}},{\"@type\":\"Question\",\"name\":\"Where is it installed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"At the compressor outlet or at each working outlet.\"}},{\"@type\":\"Question\",\"name\":\"What flow rate does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Up to 240 l\/min for the 1\/4\\\" version and 450 l\/min for the 3\/8\\\" and 1\/2\\\" version.\"}},{\"@type\":\"Question\",\"name\":\"Up to what pressure does it regulate?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Up to 12 bar; the 1\/4\\\" version regulates from 0 to 12 bar.\"}},{\"@type\":\"Question\",\"name\":\"Does it include a gauge?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, both versions include a gauge to show the outlet pressure.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"1\/4\" · 240 l\/min","offer_id":54641456742747,"sku":"CEVIK-CA-922","price":30.38,"currency_code":"EUR","in_stock":true},{"title":"3\/8\" and 1\/2\" · 450 l\/min","offer_id":54641456775515,"sku":"CEVIK-CA-940\/12","price":57.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/filtro-regulador-presion-manometro-vica-work-1.jpg?v=1793866106"},{"product_id":"grupo-frl-filtro-regulador-lubricador","title":"Filter, regulator and lubricator unit with gauge (FRL)","description":"\u003cp\u003eAn \u003cb\u003eFRL unit\u003c\/b\u003e is the simplest way to look after your pneumatic tools: in a single assembly it \u003cb\u003efilters out moisture\u003c\/b\u003e from the receiver air, \u003cb\u003eregulates the outlet pressure\u003c\/b\u003e and \u003cb\u003elubricates\u003c\/b\u003e the air going to the tool.\u003c\/p\u003e\n\u003cp\u003eTwo sizes: \u003cb\u003e1\/4\" M-F\u003c\/b\u003e with a flow rate of 240 l\/min (14.4 m³\/h) and up to 12 bar, or \u003cb\u003e3\/8\" and 1\/2\" M-F\u003c\/b\u003e with 450 l\/min and up to 16 bar. Both handle up to 60 °C and include a gauge.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eThree in one:\u003c\/b\u003e filter, regulator and lubricator assembled and ready.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eDrier air:\u003c\/b\u003e less water in pipes and tools.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003ePressure to suit:\u003c\/b\u003e with direct-reading gauge.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eLubricated tools:\u003c\/b\u003e longer service life for air motors.\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eTwo flow rates:\u003c\/b\u003e 240 or 450 l\/min depending on your air consumption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompressor outlet in mechanical workshops.\u003c\/li\u003e\n\u003cli\u003eWorkstations with impact wrenches, grinders or pneumatic drills.\u003c\/li\u003e\n\u003cli\u003eAir installations in industrial units and garages.\u003c\/li\u003e\n\u003cli\u003ePneumatic machinery that needs lubricated air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003e1\/4\":\u003c\/b\u003e M-F threads, 0-12 bar, 240 l\/min (14.4 m³\/h), max. 60 °C\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003e3\/8\" and 1\/2\":\u003c\/b\u003e M-F threads, up to 16 bar, 450 l\/min, max. 60 °C\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eComponents:\u003c\/b\u003e filter regulator, lubricator and pressure gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e do not use the FRL on the spray gun line: the oil from the lubricator would ruin the finish. For painting, take the air before the lubricator or use a non-lubricated filter regulator, and drain the filter bowl often.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch3\u003eComplete your installation\u003c\/h3\u003e\u003cp\u003eFit the FRL unit at the compressor outlet or at the working outlet and complete it with a quality air hose, universal quick couplers and dedicated pneumatic tool oil in the lubricator. If you also spray paint in the same workshop, keep one outlet with a non-lubricated filter regulator.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich size should I choose?\u003c\/h3\u003e\n\u003cp\u003e1\/4\" for tools with medium air consumption; 3\/8\" and 1\/2\" for impact wrenches, sanders or several outlets.\u003c\/p\u003e\n\u003ch3\u003eWhat oil goes in the lubricator?\u003c\/h3\u003e\n\u003cp\u003eDedicated pneumatic tool oil.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for painting?\u003c\/h3\u003e\n\u003cp\u003eNot on the paint line, because it adds oil to the air.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure can it withstand?\u003c\/h3\u003e\n\u003cp\u003e12 bar for the 1\/4\" version and 16 bar for the 3\/8\" and 1\/2\" version.\u003c\/p\u003e\n\u003ch3\u003eHow is it maintained?\u003c\/h3\u003e\n\u003cp\u003eDrain the filter regularly and top up the lubricator when the level drops.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which size should I choose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"1\/4\\\" for tools with medium air consumption; 3\/8\\\" and 1\/2\\\" for impact wrenches, sanders or several outlets.\"}},{\"@type\":\"Question\",\"name\":\"What oil goes in the lubricator?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Dedicated pneumatic tool oil.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for painting?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not on the paint line, because it adds oil to the air.\"}},{\"@type\":\"Question\",\"name\":\"What pressure can it withstand?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"12 bar for the 1\/4\\\" version and 16 bar for the 3\/8\\\" and 1\/2\\\" version.\"}},{\"@type\":\"Question\",\"name\":\"How is it maintained?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Drain the filter regularly and top up the lubricator when the level drops.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"1\/4\" · 240 l\/min","offer_id":54641456972123,"sku":"CEVIK-CA-924","price":67.62,"currency_code":"EUR","in_stock":true},{"title":"3\/8\" and 1\/2\" · 450 l\/min","offer_id":54641457004891,"sku":"CEVIK-CA-930\/12","price":93.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/grupo-frl-filtro-regulador-lubricador-vica-work-1.jpg?v=1793866138"},{"product_id":"regulador-presion-manometro-2-salidas","title":"Pressure regulator with gauge and 2 coupler outlets","description":"\u003cp\u003e\u003cstrong\u003eTwo tools, a single outlet and the pressure under control.\u003c\/strong\u003e A \u003cstrong\u003e0 to 12 bar\u003c\/strong\u003e pressure regulator with gauge and two coupler outlets for connecting two tools or hoses to the compressor at the same time. You set the pressure once and both outlets receive it equally.\u003c\/p\u003e\n\u003cp\u003eTwo 3\/8\" or 1\/2\" male coupler outlets and a male threaded inlet (1\/2\" on the model with 3\/8\" outlets). Ideal for workshops where two people share a compressor.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eTwo outlets:\u003c\/strong\u003e two tools can work at the same time.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e0-12 bar adjustment:\u003c\/strong\u003e pressure set for each job.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePressure gauge:\u003c\/strong\u003e direct pressure reading.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo sizes:\u003c\/strong\u003e 3\/8\" or 1\/2\" outlets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWorkshops with two workstations per compressor.\u003c\/li\u003e\n\u003cli\u003eCompressor outlet for a hose and a tool at the same time.\u003c\/li\u003e\n\u003cli\u003eConstruction and maintenance with several pneumatic tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to install it\u003c\/h3\u003e\n\u003cp\u003eScrew the regulator onto the compressor or air receiver outlet, using PTFE tape on the inlet thread. Connect the hoses to the outlet couplers and set the pressure with the tools running: that way the gauge shows the actual working pressure. If one of the tools needs less pressure than the other, add a regulator at its point of use. You will get more out of your compressor in everyday workshop use.\u003c\/p\u003e\n\u003ch3\u003eTechnical features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustment range:\u003c\/strong\u003e 0-12 bar\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInlet:\u003c\/strong\u003e male thread (1\/2\" on the model with 3\/8\" outlets)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutlets:\u003c\/strong\u003e 2 male couplers, 3\/8\" or 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePressure gauge:\u003c\/strong\u003e yes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReferences:\u003c\/strong\u003e CA-950\/1 · CA-950\/2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVetonek tip:\u003c\/strong\u003e if you connect two tools at the same time, add up their air consumption and check that your compressor delivers it with some margin; otherwise the pressure will drop at both outlets.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I use two tools at the same time?\u003c\/h3\u003e\n\u003cp\u003eYes, as long as the compressor delivers enough air flow for both.\u003c\/p\u003e\n\u003ch3\u003eDo both outlets have the same pressure?\u003c\/h3\u003e\n\u003cp\u003eYes, both deliver the pressure set on the regulator.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure range does it regulate?\u003c\/h3\u003e\n\u003cp\u003eFrom 0 to 12 bar.\u003c\/p\u003e\n\u003ch3\u003eWhat type of outlets does it have?\u003c\/h3\u003e\n\u003cp\u003eTwo 3\/8\" or 1\/2\" male couplers, depending on the model.\u003c\/p\u003e\n\u003ch3\u003eWhat is the inlet like?\u003c\/h3\u003e\n\u003cp\u003eMale threaded; on the model with 3\/8\" outlets the inlet is 1\/2\".\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Can I use two tools at the same time?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, as long as the compressor delivers enough air flow for both.\"}},{\"@type\":\"Question\",\"name\":\"Do both outlets have the same pressure?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, both deliver the pressure set on the regulator.\"}},{\"@type\":\"Question\",\"name\":\"What pressure range does it regulate?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"From 0 to 12 bar.\"}},{\"@type\":\"Question\",\"name\":\"What type of outlets does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Two 3\/8\\\" or 1\/2\\\" male couplers, depending on the model.\"}},{\"@type\":\"Question\",\"name\":\"What is the inlet like?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Male threaded; on the model with 3\/8\\\" outlets the inlet is 1\/2\\\".\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"3\/8\" outlets","offer_id":54641457398107,"sku":"CEVIK-CA-950\/1","price":34.3,"currency_code":"EUR","in_stock":true},{"title":"1\/2\" outlets","offer_id":54641457430875,"sku":"CEVIK-CA-950\/2","price":45.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/regulador-presion-manometro-2-salidas-vica-work-1.jpg?v=1793866173"},{"product_id":"manometro-compresor-12-bar","title":"Compressor pressure gauge, 0 to 12 bar","description":"\u003cp\u003e\u003cstrong\u003eKnow exactly what pressure your compressor is working at again.\u003c\/strong\u003e A broken, fogged-up or inaccurate pressure gauge leaves you in the dark: you do not know whether the tool is getting the air it needs, whether the regulator is set correctly or whether the receiver is close to its limit. This replacement pressure gauge for compressors, regulators and air receivers has a scale up to 12 bar, suitable for most workshop equipment.\u003c\/p\u003e\u003cp\u003eChoose the dial diameter and thread position: 63 mm with bottom or rear 1\/4\" thread, 50 mm with rear 1\/4\" thread or 40 mm with rear 1\/8\" thread. That way you will find the one that replaces yours exactly, without adaptors or awkward fitting.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale up to 12 bar:\u003c\/strong\u003e clear reading across the usual working range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour versions:\u003c\/strong\u003e 40, 50 and 63 mm dials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom or rear thread:\u003c\/strong\u003e for vertical or panel mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect replacement:\u003c\/strong\u003e for compressors, regulators and air receivers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing a compressor's broken or out-of-calibration pressure gauge.\u003c\/li\u003e\n\u003cli\u003eFitting pressure regulators and filter regulators.\u003c\/li\u003e\n\u003cli\u003eMonitoring the pressure of air receivers and air networks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScale:\u003c\/strong\u003e up to 12 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eØ 63 mm:\u003c\/strong\u003e bottom 1\/4\" or rear 1\/4\" thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eØ 50 mm:\u003c\/strong\u003e rear 1\/4\" thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eØ 40 mm:\u003c\/strong\u003e rear 1\/8\" thread\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eBefore removing the old pressure gauge, release the pressure from the circuit. When fitting the new one, always tighten using the hex on the thread, never by turning the dial: forcing the case can throw it out of calibration.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eHow do I know which one is mine?\u003c\/h3\u003e\u003cp\u003eMeasure the diameter of the dial and check whether the thread comes out underneath (bottom) or from the back (rear).\u003c\/p\u003e\u003ch3\u003eDo I need to use PTFE tape?\u003c\/h3\u003e\u003cp\u003eYes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\u003c\/p\u003e\u003ch3\u003eWhat pressure does it measure up to?\u003c\/h3\u003e\u003cp\u003eIt has a scale up to 12 bar, suitable for workshop compressors with a working pressure of up to 10 bar.\u003c\/p\u003e\u003ch3\u003eWhat thread does it have?\u003c\/h3\u003e\u003cp\u003e1\/4\" on the 63 and 50 mm versions and 1\/8\" on the 40 mm version.\u003c\/p\u003e\u003ch3\u003eIs it suitable for a pressure regulator?\u003c\/h3\u003e\u003cp\u003eYes, small dials with a rear thread are the standard on regulators and filter regulators.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How do I know which one is mine?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Measure the diameter of the dial and check whether the thread comes out underneath (bottom) or from the back (rear).\"}},{\"@type\":\"Question\",\"name\":\"Do I need to use PTFE tape?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, apply PTFE tape or thread sealant to tapered male threads to prevent leaks.\"}},{\"@type\":\"Question\",\"name\":\"What pressure does it measure up to?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It has a scale up to 12 bar, suitable for workshop compressors with a working pressure of up to 10 bar.\"}},{\"@type\":\"Question\",\"name\":\"What thread does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"1\/4\\\" on the 63 and 50 mm versions and 1\/8\\\" on the 40 mm version.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for a pressure regulator?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, small dials with a rear thread are the standard on regulators and filter regulators.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Ø 63 mm · bottom 1\/4\"","offer_id":54641457955163,"sku":"CEVIK-CA-740","price":10.78,"currency_code":"EUR","in_stock":true},{"title":"Ø 63 mm · rear 1\/4\"","offer_id":54641457987931,"sku":"CEVIK-CA-760","price":10.78,"currency_code":"EUR","in_stock":true},{"title":"Ø 50 mm · rear 1\/4\"","offer_id":54641458020699,"sku":"CEVIK-CA-780","price":8.82,"currency_code":"EUR","in_stock":true},{"title":"Ø 40 mm · rear 1\/8\"","offer_id":54641458053467,"sku":"CEVIK-CA-790","price":8.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/manometro-compresor-12-bar-vica-work-1.jpg?v=1793866203"},{"product_id":"aceite-compresor-tornillo-5-litros","title":"Mineral oil for screw compressors, 5 litres","description":"\u003cp\u003e\u003cstrong\u003eProtect your screw compressor investment with a lubricant designed to work for thousands of hours.\u003c\/strong\u003e In a screw compressor, the oil does more than lubricate: it also seals and cools the compression element. If it oxidises or loses its properties, the temperature rises, performance drops and the risk of costly breakdowns increases. This SAE 10\/20 mineral lubricant is specifically formulated for screw compressors, with high resistance to oxidation to extend service life and protect against wear and corrosion.\u003c\/p\u003e\u003cp\u003eIts formula has a low environmental impact and it comes in a 5-litre can, a practical quantity for complete oil changes and top-ups during scheduled maintenance.\u003c\/p\u003e\u003ch2\u003eAdvantages\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh resistance to oxidation:\u003c\/strong\u003e retains its properties for longer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-wear and anti-corrosion protection:\u003c\/strong\u003e looks after the screw element.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific to screw compressors:\u003c\/strong\u003e SAE 10\/20 viscosity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow environmental impact:\u003c\/strong\u003e a more eco-friendly formula.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eScheduled oil changes on screw compressors.\u003c\/li\u003e\n\u003cli\u003eLevel top-ups between services.\u003c\/li\u003e\n\u003cli\u003eWorkshops, industry and facilities with production compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e mineral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e SAE 10\/20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e screw compressors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer:\u003c\/strong\u003e 5-litre can\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eFollow your compressor manufacturer's change intervals and replace the oil filter at the same time. Use every oil change to check the oil separator and the air filter: all three work together, and a dirty one shortens the life of the others.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eIs it suitable for piston compressors?\u003c\/h3\u003e\u003cp\u003eNo, for piston compressors use an SAE 30\/40 oil specifically designed for piston compressors.\u003c\/p\u003e\u003ch3\u003eHow often should it be changed?\u003c\/h3\u003e\u003cp\u003eAccording to your screw compressor's manual and the operating hours specified by the manufacturer.\u003c\/p\u003e\u003ch3\u003eWhat viscosity does it have?\u003c\/h3\u003e\u003cp\u003eSAE 10\/20, the grade specified by the manufacturer for screw compressors.\u003c\/p\u003e\u003ch3\u003eCan I mix it with another oil?\u003c\/h3\u003e\u003cp\u003eMixing oils of a different base or from a different manufacturer is not recommended. If you change oil, drain the circuit completely.\u003c\/p\u003e\u003ch3\u003eWhat else should I replace during maintenance?\u003c\/h3\u003e\u003cp\u003eNormally the oil filter and, depending on the hours, the compressor's air filter and oil separator.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is it suitable for piston compressors?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, for piston compressors use an SAE 30\/40 oil specifically designed for piston compressors.\"}},{\"@type\":\"Question\",\"name\":\"How often should it be changed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"According to your screw compressor's manual and the operating hours specified by the manufacturer.\"}},{\"@type\":\"Question\",\"name\":\"What viscosity does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"SAE 10\/20, the grade specified by the manufacturer for screw compressors.\"}},{\"@type\":\"Question\",\"name\":\"Can I mix it with another oil?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Mixing oils of a different base or from a different manufacturer is not recommended. If you change oil, drain the circuit completely.\"}},{\"@type\":\"Question\",\"name\":\"What else should I replace during maintenance?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Normally the oil filter and, depending on the hours, the compressor's air filter and oil separator.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Can · 5 litres","offer_id":54641458544987,"sku":"CEVIK-CA-ACEITE5LCP46","price":38.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/aceite-compresor-tornillo-5-litros-vica-work-1.jpg?v=1793866228"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/collections\/calderin-vertical-aire-comprimido-vica-work-1.jpg?v=1794128147","url":"https:\/\/vetonek.com\/en\/collections\/accesorios-recambios-compresores.oembed","provider":"Vetonek","version":"1.0","type":"link"}