{"title":"Chimeneas y ventilación","description":"\u003cp\u003eRemates de chimenea, aspiradores estáticos, sombreretes y persianas de ventilación en hormigón prefabricado. Mejoran el tiro y protegen la salida de humos de la lluvia. Fabricación propia Vetonek.\u003c\/p\u003e","products":[{"product_id":"aspirador-estatico-ortogonal-chimenea-gran-formato","title":"Orthogonal Static Chimney Cowl - Large Format for Rectangular Flues","description":"\u003ch1\u003eOrthogonal static cowl: the cap for large rectangular flues\u003c\/h1\u003e\n\u003cp\u003eWhen a flue exceeds the size of a standard cowl, installers end up improvising: on-site build-ups, cut pieces, and caps that neither seal nor draw properly. This orthogonal static cowl is made exactly for that case: it covers a \u003cb\u003e62 × 31 cm flue\u003c\/b\u003e on a 79.5 × 48.5 cm base, practically double the surface of a standard model, using solid, unreinforced concrete pieces.\u003c\/p\u003e\n\u003ch2\u003e✅ Key advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVenturi effect, no electricity or moving parts:\u003c\/b\u003e wind enters through the side openings and, as the passage narrows, accelerates and drops in pressure. That suction created right above the flue mouth draws the smoke upward. The harder the wind blows, the better it draws: no motor to fail, no electricity bill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVery wide flue section:\u003c\/b\u003e 62 × 31 cm of usable flue, designed for high-output fireplaces, wood-fired kitchens, ovens and shared outlets where a small cap would choke the exhaust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-density vibro-compacted concrete, wet-cast:\u003c\/b\u003e the mix is poured fluid into the mold and compacted by vibration, giving a dense piece with a smooth finish and very low porosity. Being so compact, it holds up with no need for internal steel reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNo reinforcement, no rust, no maintenance:\u003c\/b\u003e there's no steel inside for the acidic smoke condensates or rainwater to corrode. Nothing to paint, tighten or replace over the years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModular assembly:\u003c\/b\u003e the set is made up of a base piece, four intermediate pieces and a cap piece, so it can be carried and taken up to the roof in parts instead of as a single 168 kg block.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo finishes:\u003c\/b\u003e White and Cement Grey, to blend with light façades or neutral-toned roofs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ Recommended applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWood-burning fireplaces and large hearths in single-family homes, farmhouses or country houses.\u003c\/li\u003e\n\u003cli\u003eWood-fired ovens, grills and roasters in hospitality and catering.\u003c\/li\u003e\n\u003cli\u003eShared ventilation or extraction ducts in multi-family buildings.\u003c\/li\u003e\n\u003cli\u003eRenovation of old brick-built chimneys with a large rectangular flue.\u003c\/li\u003e\n\u003cli\u003eAgricultural or industrial buildings with high-output smoke outlets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAssembled set dimensions: 84 × 51 × 57 cm.\u003c\/li\u003e\n\u003cli\u003eSupport base: 79.5 × 48.5 cm.\u003c\/li\u003e\n\u003cli\u003eFree flue section: 62 × 31 cm.\u003c\/li\u003e\n\u003cli\u003eSet weight: 168.10 kg (183.10 kg with packaging).\u003c\/li\u003e\n\u003cli\u003eMaterial: high-density vibro-compacted concrete, no internal reinforcement.\u003c\/li\u003e\n\u003cli\u003eSet composition: 1 base piece + 4 intermediate pieces + 1 cap piece.\u003c\/li\u003e\n\u003cli\u003eColors available: White and Cement Grey.\u003c\/li\u003e\n\u003cli\u003eUse: outdoor, on the roof.\u003c\/li\u003e\n\u003cli\u003ePackaging: single unit (complete set).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🧰 Installation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eCheck that the top of the flue is plumb, flat and clean, and that the internal flue section doesn't exceed 62 × 31 cm.\u003c\/li\u003e\n\u003cli\u003eLevel the top of the chimney with mortar until you have a continuous horizontal surface for the whole base to rest on.\u003c\/li\u003e\n\u003cli\u003eBed the base piece on fresh cement mortar and check the level in both directions before it sets.\u003c\/li\u003e\n\u003cli\u003eStack the four intermediate pieces one on top of another, aligning the faces and keeping the side air openings clear.\u003c\/li\u003e\n\u003cli\u003eFinish with the cap piece and seal only the outer joints. Never block the side openings: they're what create the suction.\u003c\/li\u003e\n\u003cli\u003eLet it cure for at least 48 hours before lighting the fireplace, and don't load the piece in the meantime.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e📦 Available formats\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eComplete set, 84 × 51 × 57 cm, in White, single-unit packaging.\u003c\/li\u003e\n\u003cli\u003eComplete set, 84 × 51 × 57 cm, in Cement Grey, single-unit packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e measure the flue on the inside, not the outside. This is the most common mistake: the outer size of the brickwork is measured, a cowl is ordered that then sits unsupported over the opening, and the top has to be built up with the material already up on the roof. A second check that saves headaches: the mouth should sit at least 1 m above the highest point within a 2 m radius — ridge, parapet, tree or neighboring building. That's standard good practice in Spain; if the chimney sits lower, not even the best cowl will stop downdrafts sending smoke back inside.\u003c\/p\u003e\u003c\/blockquote\u003e","brand":"Vetonek","offers":[{"title":"White","offer_id":53597541597531,"sku":"ORTO800B","price":549.68,"currency_code":"EUR","in_stock":true},{"title":"Cement Gray","offer_id":53597541630299,"sku":"ORTO800GC","price":458.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/aspirador-estatico-ortogonal.jpg?v=1784099696"},{"product_id":"sombrero-de-chimenea-de-hormigon-mejora-el-tiro","title":"Concrete Chimney Cap - Improves Draft and Prevents Smoke Backflow","description":"\u003ch1\u003eConcrete chimney cap: the cap that protects the flue and the façade\u003c\/h1\u003e\n\u003cp\u003eA chimney finished with a bare open top has two guaranteed problems. The first is wind: hitting the open mouth from the side, it pushes smoke down and back into the house. The second is water: rain gets into the flue, carries soot down with it, and comes back out at the top leaving black streaks down the brickwork. This concrete cap solves both by covering the mouth and \u003cb\u003eseparating the flue from the rain without choking the smoke outlet\u003c\/b\u003e, thanks to perimeter drip edges that cut off the water before it reaches the pillar.\u003c\/p\u003e\n\u003ch2\u003e✅ Key advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eProtects the flue from wind:\u003c\/b\u003e the top slab overhangs the pillar and deflects horizontal gusts, so wind passes over the top instead of getting into the mouth. That's what prevents smoke backflow on stormy days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrip edges on both pieces:\u003c\/b\u003e the grooved edge breaks surface tension and makes water drop off into the air instead of running down the vertical face. Without a drip edge, water runs down the pillar and stains it; with one, the top stays clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir flow on all four sides:\u003c\/b\u003e the legs leave an open chamber around the whole perimeter, so air circulates freely over the flue mouth and helps the draft instead of restricting it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConcrete with no internal reinforcement:\u003c\/b\u003e there's no steel for the acidic smoke condensates to corrode. Nothing to paint, tighten or replace: it needs no maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThree formats for three flue sections:\u003c\/b\u003e 45 × 45, 60 × 60 and 62.5 × 42.5 cm, so the cap covers the opening with margin, neither too small nor overhanging too much.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo neutral finishes:\u003c\/b\u003e Natural Grey and Cement Grey, which age well outdoors and suit both tiled and flat roofs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ Recommended applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCapping wood-burning fireplaces, stoves and boilers in single-family homes.\u003c\/li\u003e\n\u003cli\u003eTopping ventilation and extraction ducts on roofs.\u003c\/li\u003e\n\u003cli\u003eRenovating brick-built chimneys suffering smoke backflow or soot staining.\u003c\/li\u003e\n\u003cli\u003eNew builds wanting a finished cap without resorting to sheet metal.\u003c\/li\u003e\n\u003cli\u003eCountry houses, farmhouses and homes in windy or rainy areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: concrete, no internal reinforcement.\u003c\/li\u003e\n\u003cli\u003e45 × 45 × 23.5 cm size: 35.2 kg per unit; pallet of 20 units, 719 kg.\u003c\/li\u003e\n\u003cli\u003e60 × 60 × 23.5 cm size: 62.4 kg per unit.\u003c\/li\u003e\n\u003cli\u003e62.5 × 42.5 × 23.5 cm size: 43 kg per unit.\u003c\/li\u003e\n\u003cli\u003eInternal flue section of the 45 × 45 cm model: 22.6 × 22.6 cm.\u003c\/li\u003e\n\u003cli\u003eDistance between drip edges on the 45 × 45 cm model: 39.5 cm.\u003c\/li\u003e\n\u003cli\u003eColors available: Natural Grey and Cement Grey.\u003c\/li\u003e\n\u003cli\u003eUse: outdoor, on the roof.\u003c\/li\u003e\n\u003cli\u003ePackaging: single unit or pallet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🧰 Installation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMeasure the internal flue section and choose the cap whose base fully covers it with firm support all around.\u003c\/li\u003e\n\u003cli\u003eLevel the top of the flue with mortar until you have a flat, horizontal surface.\u003c\/li\u003e\n\u003cli\u003eBed the base piece on fresh cement mortar, centered over the opening, and check the level in both directions.\u003c\/li\u003e\n\u003cli\u003ePlace the top slab on the legs, checking that all four air passages remain clear.\u003c\/li\u003e\n\u003cli\u003eSeal only the support joints. Never fill the gap between the base and the slab: that's where it vents.\u003c\/li\u003e\n\u003cli\u003eLet it cure for 24-48 hours before lighting the fireplace.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e📦 Available formats\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e45 × 45 × 23.5 cm in Natural Grey, single unit or pallet.\u003c\/li\u003e\n\u003cli\u003e60 × 60 × 23.5 cm in Cement Grey, single unit or pallet.\u003c\/li\u003e\n\u003cli\u003e62.5 × 42.5 × 23.5 cm in Natural Grey, single unit or pallet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e the most common mistake is choosing the cap by the outer size of the pillar instead of the flue section, ending up with a piece that sits unsupported over the opening or doesn't cover it fully. Always measure from the inside. And don't shim the legs to lower the top slab to make it \"less conspicuous\": reducing the chamber height reduces the outlet section, and the smoke starts struggling to get out. As a good-practice reference in Spain, the chimney mouth should sit at least 1 m above any obstacle within a 2 m radius; if it doesn't reach that, build up the pillar before capping it, because no cap can make up for a chimney that's too short.\u003c\/p\u003e\u003c\/blockquote\u003e","brand":"Vetonek","offers":[{"title":"62.5 × 42.5 × 23.5 cm \/ Natural Gray \/ Unit","offer_id":53597543563611,"sku":"CH650GN","price":48.6,"currency_code":"EUR","in_stock":true},{"title":"62.5 × 42.5 × 23.5 cm \/ Natural Gray \/ Pallet","offer_id":53597543596379,"sku":"CH650GN-PALET","price":923.4,"currency_code":"EUR","in_stock":true},{"title":"60 × 60 × 23.5 cm \/ Cement Gray \/ Unit","offer_id":53597543629147,"sku":"CH600GC","price":78.15,"currency_code":"EUR","in_stock":true},{"title":"60 × 60 × 23.5 cm \/ Cement Gray \/ Pallet","offer_id":53597543661915,"sku":"CH600GC-PALET","price":296.97,"currency_code":"EUR","in_stock":true},{"title":"45 × 45 × 23.5 cm \/ Natural Gray \/ Unit","offer_id":53597543694683,"sku":"CH450GN","price":43.37,"currency_code":"EUR","in_stock":true},{"title":"45 × 45 × 23.5 cm \/ Natural Gray \/ Pallet","offer_id":53597543727451,"sku":"CH450GN-PALET","price":824.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/sombreros-de-chimenea.jpg?v=1784099709"},{"product_id":"aspirador-estatico-redondo-chimenea-proteccion-lluvia","title":"Round Static Chimney Cowl - Full Rain Protection","description":"\u003ch1\u003eRound static cowl: a modular system so the chimney draws on its own\u003c\/h1\u003e\n\u003cp\u003eA chimney finished with an open mouth collects everything that falls on it: rainwater that carries soot down the flue, dust, leaves and nests. And when wind blows sideways, smoke comes back into the living room. This round static cowl solves it by fitting a small concrete tower onto the flue — base, intermediate pieces and cap — that \u003cb\u003ecovers the mouth without closing it and uses the wind itself to draw smoke upward\u003c\/b\u003e, with no motor, no electricity and not a single moving part.\u003c\/p\u003e\n\u003ch2\u003e✅ Key advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVenturi effect:\u003c\/b\u003e wind enters through the open ring between pieces and is forced through a narrower section. As the passage narrows, the air speeds up and its pressure drops; that suction right above the flue mouth pulls smoke outward. The harder it blows, the better it draws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThree-piece modular system:\u003c\/b\u003e a base that rests on the flue top, several intermediate pieces that form the suction chamber, and a cap that finishes the assembly. Height and diameter are combined to suit each flue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMinimum of four intermediate pieces:\u003c\/b\u003e that's the chamber height needed for the Venturi effect to really work. With fewer, the assembly keeps out the rain but barely improves the draft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRound geometry, no dead corners:\u003c\/b\u003e air flows around the assembly with no turbulence in corners, and water runs off the whole circumference instead of pooling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrip edges on the cap and the base:\u003c\/b\u003e the grooved edge cuts off water and lets it fall clear, so it doesn't run down the lower pieces or stain the pillar with soot streaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConcrete with no internal reinforcement:\u003c\/b\u003e there's no steel inside for acidic smoke condensates to corrode. Nothing to paint or replace: no maintenance needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ Recommended applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWood-burning fireplaces, stoves and inserts in single-family homes.\u003c\/li\u003e\n\u003cli\u003eOutlets for oil, gas or biomass boilers suffering wind-driven backflow.\u003c\/li\u003e\n\u003cli\u003eVentilation and extraction ducts finishing at roof level.\u003c\/li\u003e\n\u003cli\u003eRenovating chimneys that get dirty or drip soot from an open mouth.\u003c\/li\u003e\n\u003cli\u003eHomes in windy, coastal or mountain areas, where downdrafts are common.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: concrete, no internal reinforcement.\u003c\/li\u003e\n\u003cli\u003eCaps: Ø 40 × 4.5 cm (11.2 kg) and Ø 50 × 4.5 cm (16.7 kg).\u003c\/li\u003e\n\u003cli\u003eIntermediate pieces: Ø 30 × 8 cm (4.2 kg) and Ø 46 × 9.2 cm (9.3 kg).\u003c\/li\u003e\n\u003cli\u003eBases: 38 × 38 × 8 cm (9.5 kg), 50 × 50 × 9.5 cm (17.9 kg), 65 × 65 × 9.2 cm (35.6 kg) and 76 × 56 × 9.2 cm (36.6 kg).\u003c\/li\u003e\n\u003cli\u003eDistance between drip edges on the Ø 40 cm cap: 35.5 cm.\u003c\/li\u003e\n\u003cli\u003eUnits per pallet for the Ø 40 cm cap: 30.\u003c\/li\u003e\n\u003cli\u003eRecommended set composition: 1 base + at least 4 intermediate pieces + 1 cap.\u003c\/li\u003e\n\u003cli\u003eColors available: White and Natural Grey.\u003c\/li\u003e\n\u003cli\u003eUse: outdoor, on the roof.\u003c\/li\u003e\n\u003cli\u003ePackaging: single unit or pallet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🧰 Installation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMeasure the internal flue section and choose the base whose opening covers it completely with firm support all around.\u003c\/li\u003e\n\u003cli\u003eLevel the top of the flue with mortar until you have a flat, horizontal surface.\u003c\/li\u003e\n\u003cli\u003eBed the base on fresh mortar, centered over the opening, and check the level in both directions.\u003c\/li\u003e\n\u003cli\u003eStack the intermediate pieces — at least four — aligning the axes and leaving the air-passage rings between them clear.\u003c\/li\u003e\n\u003cli\u003eFinish with the cap and seal only the support joints. Don't fill in the open rings: they're what create the suction.\u003c\/li\u003e\n\u003cli\u003eLet it cure for 24-48 hours before lighting the appliance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e📦 Available formats\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCaps of Ø 40 × 4.5 cm and Ø 50 × 4.5 cm, in White or Natural Grey.\u003c\/li\u003e\n\u003cli\u003eIntermediate pieces of Ø 30 × 8 cm and Ø 46 × 9.2 cm, in White or Natural Grey.\u003c\/li\u003e\n\u003cli\u003eBases of 38 × 38 × 8 cm, 50 × 50 × 9.5 cm, 65 × 65 × 9.2 cm and 76 × 56 × 9.2 cm.\u003c\/li\u003e\n\u003cli\u003eAll formats, in single-unit or pallet packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e the costliest mistake with this system is building it too short. People buy the base, the cap and one or two intermediate pieces — the parts that \"show\" — and the assembly ends up as a rain cover with no real suction. You need at least four intermediate pieces for the chamber to be tall enough for the Venturi effect to work. Also order one extra piece per chimney: these are thin-edged pieces that chip easily going up to the roof, and a second trip for just one piece costs more than the piece itself. And check the mouth height: as good practice in Spain, it should sit 1 m above the highest point within a 2 m radius.\u003c\/p\u003e\u003c\/blockquote\u003e","brand":"Vetonek","offers":[{"title":"65 × 65 × 9.2 cm \/ White \/ Unit","offer_id":53597545070939,"sku":"BR656B","price":92.13,"currency_code":"EUR","in_stock":true},{"title":"65 × 65 × 9.2 cm \/ White \/ Pallet","offer_id":53597545103707,"sku":"BR656B-PALET","price":875.23,"currency_code":"EUR","in_stock":true},{"title":"76 × 56 × 9.2 cm \/ White \/ Unit","offer_id":53597545136475,"sku":"BR55075B","price":92.13,"currency_code":"EUR","in_stock":true},{"title":"76 × 56 × 9.2 cm \/ White \/ Pallet","offer_id":53597545169243,"sku":"BR55075B-PALET","price":875.23,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 9.5 cm \/ White \/ Unit","offer_id":53597545202011,"sku":"BR30B","price":37.34,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 9.5 cm \/ Natural Gray \/ Unit","offer_id":53597545595227,"sku":"BR30GN","price":21.32,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 9.5 cm \/ White \/ Pallet","offer_id":53597545234779,"sku":"BR30B-PALET","price":496.62,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 9.5 cm \/ Natural Gray \/ Pallet","offer_id":53597545627995,"sku":"BR30GN-PALET","price":810.16,"currency_code":"EUR","in_stock":true},{"title":"Ø 46 × 9.2 cm \/ White \/ Unit","offer_id":53597545267547,"sku":"AR30B","price":13.5,"currency_code":"EUR","in_stock":true},{"title":"Ø 46 × 9.2 cm \/ Natural Gray \/ Unit","offer_id":53597545660763,"sku":"AR30GN","price":10.62,"currency_code":"EUR","in_stock":true},{"title":"Ø 46 × 9.2 cm \/ White \/ Pallet","offer_id":53597545300315,"sku":"AR30B-PALET","price":872.1,"currency_code":"EUR","in_stock":true},{"title":"Ø 46 × 9.2 cm \/ Natural Gray \/ Pallet","offer_id":53597545693531,"sku":"AR30GN-PALET","price":686.05,"currency_code":"EUR","in_stock":true},{"title":"Ø 50 × 4.5 cm \/ White \/ Unit","offer_id":53597545333083,"sku":"CR30B","price":39.45,"currency_code":"EUR","in_stock":true},{"title":"Ø 50 × 4.5 cm \/ Natural Gray \/ Unit","offer_id":53597545726299,"sku":"CR30GN","price":25.93,"currency_code":"EUR","in_stock":true},{"title":"Ø 50 × 4.5 cm \/ White \/ Pallet","offer_id":53597545365851,"sku":"CR30B-PALET","price":599.64,"currency_code":"EUR","in_stock":true},{"title":"Ø 50 × 4.5 cm \/ Natural Gray \/ Pallet","offer_id":53597545759067,"sku":"CR30GN-PALET","price":985.34,"currency_code":"EUR","in_stock":true},{"title":"38 × 38 × 8 cm \/ White \/ Unit","offer_id":53597545398619,"sku":"BR20B","price":14.27,"currency_code":"EUR","in_stock":true},{"title":"38 × 38 × 8 cm \/ Natural Gray \/ Unit","offer_id":53597545791835,"sku":"BR20GN","price":11.04,"currency_code":"EUR","in_stock":true},{"title":"38 × 38 × 8 cm \/ White \/ Pallet","offer_id":53597545431387,"sku":"BR20B-PALET","price":298.24,"currency_code":"EUR","in_stock":true},{"title":"38 × 38 × 8 cm \/ Natural Gray \/ Pallet","offer_id":53597545824603,"sku":"BR20GN-PALET","price":230.74,"currency_code":"EUR","in_stock":true},{"title":"Ø 30 × 8 cm \/ White \/ Unit","offer_id":53597545464155,"sku":"AR20B","price":11.32,"currency_code":"EUR","in_stock":true},{"title":"Ø 30 × 8 cm \/ Natural Gray \/ Unit","offer_id":53597545857371,"sku":"AR20GN","price":9.04,"currency_code":"EUR","in_stock":true},{"title":"Ø 30 × 8 cm \/ White \/ Pallet","offer_id":53597545496923,"sku":"AR20B-PALET","price":1096.91,"currency_code":"EUR","in_stock":true},{"title":"Ø 30 × 8 cm \/ Natural Gray \/ Pallet","offer_id":53597545890139,"sku":"AR20GN-PALET","price":875.98,"currency_code":"EUR","in_stock":true},{"title":"Ø 40 × 4.5 cm \/ White \/ Unit","offer_id":53597545529691,"sku":"CR20B","price":24.68,"currency_code":"EUR","in_stock":true},{"title":"Ø 40 × 4.5 cm \/ Natural Gray \/ Unit","offer_id":53597545922907,"sku":"CR20GN","price":16.81,"currency_code":"EUR","in_stock":true},{"title":"Ø 40 × 4.5 cm \/ White \/ Pallet","offer_id":53597545562459,"sku":"CR20B-PALET","price":703.38,"currency_code":"EUR","in_stock":true},{"title":"Ø 40 × 4.5 cm \/ Natural Gray \/ Pallet","offer_id":53597545955675,"sku":"CR20GN-PALET","price":479.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/aspiradores-estaticos-redondos.jpg?v=1784099738"},{"product_id":"remate-de-chimenea-turegano-salida-de-humos","title":"Turégano Chimney Cap - Flue Outlet with Slate Texture","description":"\u003ch1\u003eTurégano chimney cap: the flue outlet everyone can see from the street\u003c\/h1\u003e\n\u003cp\u003eThe chimney is the last thing finished on a job and almost always the part that looks worst: an exposed-brick pillar, a metal pipe sticking out, or a concrete slab cut to size on site. It's visible from the whole street and gives away the finish. The Turégano range solves the whole capping job with precast pieces in \u003cb\u003eslate texture, in two finishes, Champagne and Pirineos\u003c\/b\u003e, that build a clean cap with the same material language as stone cladding and no on-site cutting.\u003c\/p\u003e\n\u003ch2\u003e✅ Key advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePillar-and-cap system:\u003c\/b\u003e the range combines pillar pieces (30 × 30 and 40 × 40 cm footprint, 20 cm tall) with caps that top them (40 × 40 and 50 × 50 cm). Each cap overhangs 5 cm per side beyond its pillar, exactly the overhang needed for water to fall clear of the brickwork.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMolded-in slate texture:\u003c\/b\u003e the relief comes from the factory across the whole visible face, so the cap has the look of natural stone without the weight, cost or layout work of cladding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo finishes that match the façade:\u003c\/b\u003e Champagne, warm and sandy, and Pirineos, greyer and cooler. Chosen to suit the roof tile and cladding color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCourse-by-course assembly:\u003c\/b\u003e the pillar pieces stack to give whatever height is needed, so a short chimney can be built up with the same cap material instead of exposed brickwork.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConcrete with no internal reinforcement:\u003c\/b\u003e there's no steel inside for acidic smoke condensates or rainwater to corrode. It won't flake from corrosion and needs no maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLight, easy-to-handle pieces:\u003c\/b\u003e from 12 kg for the small pillar piece, light enough to carry and place by hand on the roof.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ Recommended applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCapping and topping chimneys in single-family and terraced homes.\u003c\/li\u003e\n\u003cli\u003eBuilding up short chimneys that don't reach the recommended height above the ridge.\u003c\/li\u003e\n\u003cli\u003eRenovating deteriorated or poorly finished brick-built chimney tops.\u003c\/li\u003e\n\u003cli\u003eVentilation and boiler outlets visible from the street.\u003c\/li\u003e\n\u003cli\u003eNew builds with stone façades or cladding, where the cap needs to match the same material language.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: concrete with a slate texture, no internal reinforcement.\u003c\/li\u003e\n\u003cli\u003e30 × 30 × 20 cm pillar piece: 12 kg per unit; pallet of 24 units, 304 kg.\u003c\/li\u003e\n\u003cli\u003e40 × 40 × 20 cm pillar piece: 22 kg per unit; pallet 544 kg.\u003c\/li\u003e\n\u003cli\u003e40 × 40 × 6 cm cap: 20.8 kg per unit; pallet 348 kg.\u003c\/li\u003e\n\u003cli\u003e50 × 50 × 7 cm cap: 37.8 kg per unit; pallet 394 kg.\u003c\/li\u003e\n\u003cli\u003eRecommended pairing: 40 × 40 cap on 30 × 30 pillar; 50 × 50 cap on 40 × 40 pillar.\u003c\/li\u003e\n\u003cli\u003eColors available: Champagne and Pirineos.\u003c\/li\u003e\n\u003cli\u003ePiece type: flue outlet.\u003c\/li\u003e\n\u003cli\u003eUse: outdoor, on the roof.\u003c\/li\u003e\n\u003cli\u003ePackaging: single unit or pallet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🧰 Installation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMeasure the outer section of the flue and choose the pillar piece that wraps around it, and the cap that overhangs 5 cm per side beyond that footprint.\u003c\/li\u003e\n\u003cli\u003eLevel the existing top with mortar to get a flat, horizontal surface to start the first course on.\u003c\/li\u003e\n\u003cli\u003eBed the pillar pieces with fine-joint mortar, checking plumb and level on every course; don't let it lean to one side, since the error accumulates.\u003c\/li\u003e\n\u003cli\u003eAlways keep the internal flue section clear: the pieces wrap the duct, they don't cover it.\u003c\/li\u003e\n\u003cli\u003eFinish with the cap centered so the overhang is equal on all four sides, and seal the perimeter joint.\u003c\/li\u003e\n\u003cli\u003eClean mortar residue off the visible face before it hardens: on a slate texture, dried mortar won't come off.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e📦 Available formats\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e30 × 30 × 20 cm pillar piece, in Champagne or Pirineos, single unit or pallet.\u003c\/li\u003e\n\u003cli\u003e40 × 40 × 20 cm pillar piece, in Champagne or Pirineos, single unit or pallet.\u003c\/li\u003e\n\u003cli\u003e40 × 40 × 6 cm cap, in Champagne or Pirineos, single unit or pallet.\u003c\/li\u003e\n\u003cli\u003e50 × 50 × 7 cm cap, in Champagne or Pirineos, single unit or pallet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e order the pillar pieces and the cap from the same pallet and, if possible, the same order. These are molded pieces with texture and color, and between different batches there are small tone differences that don't show on the warehouse floor but stand out a lot once installed and seen backlit from the street. Also allow 5% extra material: the edges of these pieces chip easily when carried up to the roof, and a single broken piece means a second delivery that costs more than that whole 5%. And don't use the cap to narrow the flue thinking \"it'll draw better\": it's the opposite — reducing the section restricts the exhaust and causes condensation.\u003c\/p\u003e\u003c\/blockquote\u003e","brand":"Vetonek","offers":[{"title":"40 × 40 × 20 cm \/ Champagne \/ Unit","offer_id":53597547364699,"sku":"PILLIC40FCH","price":52.97,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 20 cm \/ Pyrenees \/ Unit","offer_id":53597547626843,"sku":"PILLIC40FPR","price":52.97,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 20 cm \/ Champagne \/ Pallet","offer_id":53597547397467,"sku":"PILLIC40FCH-PALET","price":1207.72,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 20 cm \/ Pyrenees \/ Pallet","offer_id":53597547659611,"sku":"PILLIC40FPR-PALET","price":1207.72,"currency_code":"EUR","in_stock":true},{"title":"30 × 30 × 20 cm \/ Champagne \/ Unit","offer_id":53597547430235,"sku":"PILLIC30FCH","price":28.91,"currency_code":"EUR","in_stock":true},{"title":"30 × 30 × 20 cm \/ Pyrenees \/ Unit","offer_id":53597547692379,"sku":"PILLIC30FPR","price":28.91,"currency_code":"EUR","in_stock":true},{"title":"30 × 30 × 20 cm \/ Champagne \/ Pallet","offer_id":53597547463003,"sku":"PILLIC30FCH-PALET","price":659.15,"currency_code":"EUR","in_stock":true},{"title":"30 × 30 × 20 cm \/ Pyrenees \/ Pallet","offer_id":53597547725147,"sku":"PILLIC30FPR-PALET","price":659.15,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 7 cm \/ Champagne \/ Unit","offer_id":53597547495771,"sku":"CKLLIC50CH","price":50.88,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 7 cm \/ Pyrenees \/ Unit","offer_id":53597547757915,"sku":"CKLLIC50PR","price":50.88,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 7 cm \/ Champagne \/ Pallet","offer_id":53597547528539,"sku":"CKLLIC50CH-PALET","price":483.36,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 7 cm \/ Pyrenees \/ Pallet","offer_id":53597547790683,"sku":"CKLLIC50PR-PALET","price":483.36,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 6 cm \/ Champagne \/ Unit","offer_id":53597547561307,"sku":"CKLLIC40CH","price":29.76,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 6 cm \/ Pyrenees \/ Unit","offer_id":53597547823451,"sku":"CKLLIC40PR","price":29.76,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 6 cm \/ Champagne \/ Pallet","offer_id":53597547594075,"sku":"CKLLIC40CH-PALET","price":452.35,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 6 cm \/ Pyrenees \/ Pallet","offer_id":53597547856219,"sku":"CKLLIC40PR-PALET","price":452.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/chimeneas-llicorella.jpg?v=1784099762"},{"product_id":"base-doble-hormigon-aspirador-estatico-tiro-doble","title":"Double Concrete Base for Static Chimney Cowl - Twin-Flue Installation","description":"\u003ch1\u003eDouble concrete base: two flues solved with a single piece\u003c\/h1\u003e\n\u003cp\u003eWhen a chimney rises with two twin ducts — one for the boiler and one for the fireplace, or two homes sharing a pillar — the usual approach is to fit two separate bases on the same top. The result is almost always the same: the two pieces end up misaligned, a joint opens up between them that has to be filled with mortar, and that joint is exactly where water starts to seep in within a couple of years. This base fixes the problem at the root: it's \u003cb\u003ea single piece, 125 × 65 × 5 cm, that houses both 31 × 31 cm flues\u003c\/b\u003e, with no central joint to seal and nothing to misalign.\u003c\/p\u003e\n\u003ch2\u003e✅ Key advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNo central joint:\u003c\/b\u003e both openings are formed in the same piece, with the exact spacing and square faces. There's nothing to set out on site or adjust two bases by eye on the roof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal watertightness:\u003c\/b\u003e with no joint between the two flues, the weak point where water gets in disappears. The only joint to seal is the outer perimeter, which is much better protected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with round and square cowls:\u003c\/b\u003e whatever tower you need goes on top of each flue, round or square, depending on the look and the flue section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConcrete with no internal reinforcement:\u003c\/b\u003e acidic smoke condensates and rainwater have no steel to corrode. The piece doesn't swell, doesn't flake from corrosion and needs no maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLarge load-spreading surface:\u003c\/b\u003e at 125 × 65 cm it spreads the weight of both towers across the whole top, instead of concentrating it on two small supports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo finishes:\u003c\/b\u003e White and Cement Grey, to match the brickwork or the rest of the cap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ Recommended applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChimneys with a fireplace duct and a boiler duct on the same pillar.\u003c\/li\u003e\n\u003cli\u003eShared flue (shunt) between two homes in multi-family buildings.\u003c\/li\u003e\n\u003cli\u003eDouble ventilation and extraction outlets on flat or pitched roofs.\u003c\/li\u003e\n\u003cli\u003eRenovating double chimney tops that have been leaking through the central joint for years.\u003c\/li\u003e\n\u003cli\u003eNew builds wanting to unify the cap for two twin ducts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePiece dimensions: 125 × 65 × 5 cm.\u003c\/li\u003e\n\u003cli\u003eSection of each flue: 31 × 31 cm.\u003c\/li\u003e\n\u003cli\u003eInternal dimensions: 17 × 31 × 29 cm.\u003c\/li\u003e\n\u003cli\u003eUnit weight: 67.3 kg.\u003c\/li\u003e\n\u003cli\u003eUnits per pallet: 10 (pallet weight, 689 kg).\u003c\/li\u003e\n\u003cli\u003eMaterial: concrete, no internal reinforcement.\u003c\/li\u003e\n\u003cli\u003eColors available: White and Cement Grey.\u003c\/li\u003e\n\u003cli\u003eCompatibility: round and square static cowls.\u003c\/li\u003e\n\u003cli\u003eUse: outdoor, on the roof.\u003c\/li\u003e\n\u003cli\u003ePackaging: single unit or pallet of 10 units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🧰 Installation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eCheck that both ducts have a section of 31 × 31 cm or less and that the spacing between their centers matches the piece. Always measure from inside the flue.\u003c\/li\u003e\n\u003cli\u003eLevel the top of the pillar with mortar to get a continuous horizontal plane under the whole 125 × 65 cm footprint.\u003c\/li\u003e\n\u003cli\u003eLift the piece with mechanical aids or with two workers: it weighs 67.3 kg and can't be handled single-handed.\u003c\/li\u003e\n\u003cli\u003eBed the base on fresh mortar, centering both openings over the flue mouths, and check the level in both directions before it sets.\u003c\/li\u003e\n\u003cli\u003eSeal only the outer support perimeter. Don't block or reduce the section of the openings.\u003c\/li\u003e\n\u003cli\u003eFit the tower for each cowl on top and let it cure for 48 hours before starting up the appliances.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e📦 Available formats\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e125 × 65 × 5 cm in White, single unit or pallet of 10 units.\u003c\/li\u003e\n\u003cli\u003e125 × 65 × 5 cm in Cement Grey, single unit or pallet of 10 units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e before ordering the base, go up on the roof and measure the distance between the centers of the two flues, not just each one's section. That's the detail most often forgotten, and it decides whether the piece fits or has to be returned: if the ducts are farther apart than the base allows, there's no way to adjust it and you're back to two separate pieces. And don't use the installation as a chance to \"join\" the two flues internally thinking they'll draw better: two connected ducts steal draft from each other and end up sending smoke from one back into the other. Keep each flue independent all the way to the mouth.\u003c\/p\u003e\u003c\/blockquote\u003e","brand":"Vetonek","offers":[{"title":"White \/ Unit","offer_id":53597548642651,"sku":"BUB125B","price":373.58,"currency_code":"EUR","in_stock":true},{"title":"Cement Gray \/ Unit","offer_id":53597548740955,"sku":"BUB125GC","price":310.47,"currency_code":"EUR","in_stock":true},{"title":"White \/ Pallet","offer_id":53597548675419,"sku":"BUB125B-PALET","price":3549.01,"currency_code":"EUR","in_stock":true},{"title":"Cement Gray \/ Pallet","offer_id":53597548773723,"sku":"BUB125GC-PALET","price":2949.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/base-doble-aspirador-estatico.jpg?v=1784099773"},{"product_id":"aspirador-estatico-cuadrado-chimenea-tiro-optimo","title":"Square Static Chimney Cowl - Optimal Draft with No Smoke Backflow","description":"\u003ch1\u003eSquare static cowl: a constant draft, no motor and no maintenance\u003c\/h1\u003e\n\u003cp\u003eA poor draft isn't fixed by opening a window. If the chimney sends smoke back every time the wind blows, if the house smells of cold wood smoke, or if the fire is slow to catch, the problem is almost always at the flue mouth, not inside the house. This square static cowl fits a small concrete tower onto the flue top that \u003cb\u003eturns wind into suction thanks to the Venturi effect\u003c\/b\u003e: the harder it blows, the better the chimney draws. No motor, no electricity, not a single part that can break down.\u003c\/p\u003e\n\u003ch2\u003e✅ Key advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eThe Venturi effect explained:\u003c\/b\u003e wind enters through the gaps between the stacked pieces and is forced through a narrower section. As the passage narrows the air speeds up and, by conservation of energy, its pressure drops. That low-pressure zone sits right above the flue mouth and sucks smoke upward instead of letting it sink back down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThree-piece modular system:\u003c\/b\u003e a base piece that rests and seals on the flue top, intermediate pieces that stack to form the suction chamber, and a cap piece that finishes and protects the top.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFour intermediate pieces to start, six maximum:\u003c\/b\u003e the effect already works with four; adding more improves draft up to a limit of six, beyond which the extra height stops paying off and the assembly gets too slender.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrip edge on the base piece:\u003c\/b\u003e the grooved edge cuts off rainwater and makes it fall clear of the brickwork, so the pillar doesn't get stained with soot streaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSquare geometry:\u003c\/b\u003e sits and fits naturally on brick or block pillars, with no need to adapt the top to a circular shape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConcrete with no internal reinforcement:\u003c\/b\u003e there's no steel inside for acidic smoke condensates to corrode. It won't flake from corrosion, needs no painting and no maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTen sizes and four finishes:\u003c\/b\u003e from 32 × 32 cm to 80 × 80 cm, in White, Black, Grey and Natural Grey.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ Recommended applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWood-burning fireplaces, hearths and inserts in single-family homes.\u003c\/li\u003e\n\u003cli\u003eOutlets for oil, gas or biomass boilers with wind-related draft problems.\u003c\/li\u003e\n\u003cli\u003eVentilation and extraction ducts finishing at roof level.\u003c\/li\u003e\n\u003cli\u003eAgricultural and industrial buildings with exposed smoke outlets.\u003c\/li\u003e\n\u003cli\u003eRenovation of brick-built chimneys suffering smoke backflow or water ingress.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: concrete, no internal reinforcement.\u003c\/li\u003e\n\u003cli\u003eIntermediate pieces: 32 × 32 × 8 cm (5.8 kg) and 46 × 46 × 9.2 cm (12.7 kg).\u003c\/li\u003e\n\u003cli\u003eBase pieces: 38 × 38 × 8.5 cm (9.35 kg), 50 × 50 × 9.5 cm (15.1 kg), 60 × 60 × 5 cm (25.6 kg), 65 × 65 × 9.2 cm (36.4 kg), 76 × 56 × 9.2 cm (35.6 kg) and 80 × 80 × 5 cm (52 kg).\u003c\/li\u003e\n\u003cli\u003eCap pieces: 40 × 40 × 6 cm (19 kg) and 50 × 50 × 6 cm (31.2 kg).\u003c\/li\u003e\n\u003cli\u003eFree flue section of the 32 × 32 cm intermediate piece: 20.4 × 20.4 cm.\u003c\/li\u003e\n\u003cli\u003eUnits per pallet for the 32 × 32 cm intermediate piece: 108.\u003c\/li\u003e\n\u003cli\u003eRecommended assembly: 1 base piece + 4 intermediate pieces + 1 cap piece.\u003c\/li\u003e\n\u003cli\u003eMaximum intermediate pieces: 6.\u003c\/li\u003e\n\u003cli\u003eColors available: White, Black, Grey and Natural Grey.\u003c\/li\u003e\n\u003cli\u003eUse: outdoor, on the roof.\u003c\/li\u003e\n\u003cli\u003ePackaging: single unit or pallet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🧰 Installation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMeasure the internal flue section and choose the base piece whose opening covers it completely with firm support all around.\u003c\/li\u003e\n\u003cli\u003eLevel the top of the flue with mortar until you have a flat, horizontal surface.\u003c\/li\u003e\n\u003cli\u003eBed the base piece on fresh mortar, centered over the opening and with the drip edge facing outward, and check the level in both directions.\u003c\/li\u003e\n\u003cli\u003eStack the intermediate pieces — four minimum, six maximum — aligning the faces and keeping the air-passage openings clear.\u003c\/li\u003e\n\u003cli\u003eFinish with the cap piece and seal only the support joints. Never close off the side openings: without them there's no Venturi effect.\u003c\/li\u003e\n\u003cli\u003eLet it cure for 24-48 hours before lighting the appliance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e📦 Available formats\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntermediate pieces of 32 × 32 × 8 cm and 46 × 46 × 9.2 cm.\u003c\/li\u003e\n\u003cli\u003eBase pieces of 38 × 38 × 8.5 cm, 50 × 50 × 9.5 cm, 60 × 60 × 5 cm, 65 × 65 × 9.2 cm, 76 × 56 × 9.2 cm and 80 × 80 × 5 cm.\u003c\/li\u003e\n\u003cli\u003eCap pieces of 40 × 40 × 6 cm and 50 × 50 × 6 cm.\u003c\/li\u003e\n\u003cli\u003eFinishes in White, Black, Grey and Natural Grey, depending on size.\u003c\/li\u003e\n\u003cli\u003eAll formats, in single-unit or pallet packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e fit all four intermediate pieces even if it looks like a lot in the photo. This is the most common mistake with this system: people fit the base, one intermediate piece and the cap because it looks \"less conspicuous\", and the result is a rain cover with no real suction. The chamber needs height for the air to speed up and create the low pressure. Also check the mouth height before installing: standard good practice in Spain is to leave it 1 m above the highest point within a 2 m radius — ridge, parapet, tree or party wall. If the chimney sits lower, wind creates downdrafts over the roof that no cowl can compensate for: the pillar needs building up first.\u003c\/p\u003e\u003c\/blockquote\u003e","brand":"Vetonek","offers":[{"title":"80 × 80 × 5 cm \/ White \/ Unit","offer_id":53597550707035,"sku":"BC8080B","price":114.1,"currency_code":"EUR","in_stock":true},{"title":"80 × 80 × 5 cm \/ White \/ Pallet","offer_id":53597550739803,"sku":"BC8080B-PALET","price":1625.92,"currency_code":"EUR","in_stock":true},{"title":"65 × 65 × 9.2 cm \/ White \/ Unit","offer_id":53597550772571,"sku":"BC6565B","price":91.26,"currency_code":"EUR","in_stock":true},{"title":"65 × 65 × 9.2 cm \/ White \/ Pallet","offer_id":53597550805339,"sku":"BC6565B-PALET","price":866.97,"currency_code":"EUR","in_stock":true},{"title":"60 × 60 × 5 cm \/ White \/ Unit","offer_id":53597550838107,"sku":"BCS600B","price":78.56,"currency_code":"EUR","in_stock":true},{"title":"60 × 60 × 5 cm \/ White \/ Pallet","offer_id":53597550870875,"sku":"BCS600B-PALET","price":1044.85,"currency_code":"EUR","in_stock":true},{"title":"76 × 56 × 9.2 cm \/ White \/ Unit","offer_id":53597550903643,"sku":"BC5575B","price":91.26,"currency_code":"EUR","in_stock":true},{"title":"76 × 56 × 9.2 cm \/ White \/ Pallet","offer_id":53597550936411,"sku":"BC5575B-PALET","price":866.97,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 6 cm \/ White \/ Unit","offer_id":53597550969179,"sku":"CK50B","price":36.94,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 6 cm \/ Black \/ Unit","offer_id":53597551362395,"sku":"CK50NAN","price":40.61,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 6 cm \/ Natural Gray \/ Unit","offer_id":53597551624539,"sku":"CK50GN","price":22.66,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 6 cm \/ White \/ Pallet","offer_id":53597551001947,"sku":"CK50B-PALET","price":561.49,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 6 cm \/ Black \/ Pallet","offer_id":53597551395163,"sku":"CK50NAN-PALET","price":617.27,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 6 cm \/ Natural Gray \/ Pallet","offer_id":53597551657307,"sku":"CK50GN-PALET","price":861.08,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 9.5 cm \/ White \/ Unit","offer_id":53597551034715,"sku":"BC300B","price":38.85,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 9.5 cm \/ Natural Gray \/ Unit","offer_id":53597551690075,"sku":"BC300GN","price":21.12,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 9.5 cm \/ White \/ Pallet","offer_id":53597551067483,"sku":"BC300B-PALET","price":516.7,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 9.5 cm \/ Natural Gray \/ Pallet","offer_id":53597551722843,"sku":"BC300GN-PALET","price":802.56,"currency_code":"EUR","in_stock":true},{"title":"46 × 46 × 9.2 cm \/ White \/ Unit","offer_id":53597551100251,"sku":"AC300B","price":14.5,"currency_code":"EUR","in_stock":true},{"title":"46 × 46 × 9.2 cm \/ Natural Gray \/ Unit","offer_id":53597551755611,"sku":"AC300GN","price":11.19,"currency_code":"EUR","in_stock":true},{"title":"46 × 46 × 9.2 cm \/ White \/ Pallet","offer_id":53597551133019,"sku":"AC300B-PALET","price":909.15,"currency_code":"EUR","in_stock":true},{"title":"46 × 46 × 9.2 cm \/ Natural Gray \/ Pallet","offer_id":53597551788379,"sku":"AC300GN-PALET","price":701.61,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 6 cm \/ White \/ Unit","offer_id":53597551165787,"sku":"CK40B","price":21.78,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 6 cm \/ Black \/ Unit","offer_id":53597551427931,"sku":"CK40NAN","price":23.96,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 6 cm \/ Gray \/ Unit","offer_id":53597551821147,"sku":"CK40GN","price":17.05,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 6 cm \/ White \/ Pallet","offer_id":53597551198555,"sku":"CK40B-PALET","price":703.49,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 6 cm \/ Black \/ Pallet","offer_id":53597551460699,"sku":"CK40NAN-PALET","price":773.91,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 6 cm \/ Gray \/ Pallet","offer_id":53597551853915,"sku":"CK40GN-PALET","price":550.72,"currency_code":"EUR","in_stock":true},{"title":"38 × 38 × 8.5 cm \/ White \/ Unit","offer_id":53597551231323,"sku":"BC200B","price":19.93,"currency_code":"EUR","in_stock":true},{"title":"38 × 38 × 8.5 cm \/ Black \/ Unit","offer_id":53597551493467,"sku":"BC200NAN","price":21.93,"currency_code":"EUR","in_stock":true},{"title":"38 × 38 × 8.5 cm \/ Natural Gray \/ Unit","offer_id":53597551886683,"sku":"BC200GN","price":17.41,"currency_code":"EUR","in_stock":true},{"title":"38 × 38 × 8.5 cm \/ White \/ Pallet","offer_id":53597551264091,"sku":"BC200B-PALET","price":454.4,"currency_code":"EUR","in_stock":true},{"title":"38 × 38 × 8.5 cm \/ Black \/ Pallet","offer_id":53597551526235,"sku":"BC200NAN-PALET","price":1000.01,"currency_code":"EUR","in_stock":true},{"title":"38 × 38 × 8.5 cm \/ Natural Gray \/ Pallet","offer_id":53597551919451,"sku":"BC200GN-PALET","price":793.9,"currency_code":"EUR","in_stock":true},{"title":"32 × 32 × 8 cm \/ White \/ Unit","offer_id":53597551296859,"sku":"AC200B","price":12.63,"currency_code":"EUR","in_stock":true},{"title":"32 × 32 × 8 cm \/ Black \/ Unit","offer_id":53597551559003,"sku":"AC200NAN","price":13.88,"currency_code":"EUR","in_stock":true},{"title":"32 × 32 × 8 cm \/ Natural Gray \/ Unit","offer_id":53597551952219,"sku":"AC200GN","price":9.32,"currency_code":"EUR","in_stock":true},{"title":"32 × 32 × 8 cm \/ White \/ Pallet","offer_id":53597551329627,"sku":"AC200B-PALET","price":1295.84,"currency_code":"EUR","in_stock":true},{"title":"32 × 32 × 8 cm \/ Black \/ Pallet","offer_id":53597551591771,"sku":"AC200NAN-PALET","price":1424.09,"currency_code":"EUR","in_stock":true},{"title":"32 × 32 × 8 cm \/ Natural Gray \/ Pallet","offer_id":53597551984987,"sku":"AC200GN-PALET","price":956.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/aspiradores-estaticos-cuadrados.jpg?v=1784099805"},{"product_id":"remate-de-chimenea-ordesa-salida-de-humos","title":"Ordesa Chimney Cap - Flue Outlet with Stone Finish","description":"\u003ch1\u003eOrdesa chimney cap: topping the flue outlet with a stone finish\u003c\/h1\u003e\n\u003cp\u003eThe chimney top is the part of the whole roof that ages worst. It takes rain from above, hot smoke from inside and ice in winter, and when it's finished with a concrete slab cut on site, it ends up cracked, soot-stained and chipped at the edge. The Ordesa range caps the flue with precast pieces in a \u003cb\u003estone finish available in three tones, Caliza, Champagne and Pirineos\u003c\/b\u003e, giving a clean, long-lasting finish with not a single cut made on the roof.\u003c\/p\u003e\n\u003ch2\u003e✅ Key advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePillar and cap pieces that work together:\u003c\/b\u003e the 30 × 30 and 40 × 40 cm footprint pieces, 20 cm tall, stack to wrap the flue, and the 45 × 45 cm cap tops the assembly, overhanging the 40 × 40 cm piece so water falls clear of the brickwork.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFast, cut-free installation:\u003c\/b\u003e the sizes come ready-made from the factory, so there's nothing to set out, cut or trim with an angle grinder up on the roof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThree stone finishes:\u003c\/b\u003e Caliza, light and warm; Champagne, sandy; and Pirineos, greyer. Chosen to match the roof tile and façade color.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCan be used to build up height:\u003c\/b\u003e adding courses of the pillar piece raises the chimney mouth using the same cap material, instead of leaving a stretch of unfinished exposed brickwork.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConcrete with no internal reinforcement:\u003c\/b\u003e there's no steel inside for acidic smoke condensates or rainwater to corrode. It won't flake from corrosion and needs no maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManageable pieces:\u003c\/b\u003e between 12 and 16 kg for the pillar pieces, light enough to carry and place without lifting equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ Recommended applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTopping and capping chimneys in single-family homes, terraced houses and country houses.\u003c\/li\u003e\n\u003cli\u003eBuilding up chimneys that don't reach the recommended height above the ridge.\u003c\/li\u003e\n\u003cli\u003eRenovating cracked, stained or poorly finished chimney tops.\u003c\/li\u003e\n\u003cli\u003eVentilation and boiler outlets visible from the street.\u003c\/li\u003e\n\u003cli\u003eNew builds where the cap needs to match a stone façade's material language.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: concrete with a stone finish, no internal reinforcement.\u003c\/li\u003e\n\u003cli\u003e30 × 30 × 20 cm pillar piece: 12 kg per unit; pallet of 24 units, 243 kg.\u003c\/li\u003e\n\u003cli\u003e40 × 40 × 20 cm pillar piece: 16 kg per unit; pallet 400 kg.\u003c\/li\u003e\n\u003cli\u003e45 × 45 × 3.5 cm cap: 13.8 kg per unit; pallet 675 kg.\u003c\/li\u003e\n\u003cli\u003eColors available: Caliza, Champagne and Pirineos, depending on size.\u003c\/li\u003e\n\u003cli\u003ePiece type: flue outlet.\u003c\/li\u003e\n\u003cli\u003eUse: outdoor, on the roof.\u003c\/li\u003e\n\u003cli\u003ePackaging: single unit or pallet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🧰 Installation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMeasure the outer section of the flue and choose the pillar piece that wraps it; the 45 × 45 cm cap tops the 40 × 40 cm piece.\u003c\/li\u003e\n\u003cli\u003eLevel the existing top with mortar to get a flat, horizontal surface for the first course.\u003c\/li\u003e\n\u003cli\u003eBed the pillar pieces with fine-joint mortar, checking plumb and level on every course.\u003c\/li\u003e\n\u003cli\u003eAlways keep the internal flue section clear: the pieces wrap the duct, they never narrow it.\u003c\/li\u003e\n\u003cli\u003eFit the cap centered, with an equal overhang on all four sides, and seal the perimeter joint.\u003c\/li\u003e\n\u003cli\u003eRemove mortar residue from the visible face before it hardens; on a stone finish it won't come off afterwards.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e📦 Available formats\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e40 × 40 × 20 cm pillar piece in Champagne, single unit or pallet.\u003c\/li\u003e\n\u003cli\u003e30 × 30 × 20 cm pillar piece in Champagne or Pirineos, single unit or pallet.\u003c\/li\u003e\n\u003cli\u003e45 × 45 × 3.5 cm cap in Caliza or Pirineos, single unit or pallet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e plan the number of courses on the ground before carrying anything up. Each pillar piece gives 20 cm of height plus the joint thickness, and the final height needs to come out as a multiple of that measurement: if you're half a piece short, there's no clean fix except cutting, and a cut piece breaks the texture right where it shows most. Also check that the mouth sits 1 m above the highest point within a 2 m radius — standard good practice in Spain — and use this cap to gain that height if you're short: it's much cheaper to add two courses now than to come back in a year because the house fills with smoke every time the north wind blows.\u003c\/p\u003e\u003c\/blockquote\u003e","brand":"Vetonek","offers":[{"title":"40 × 40 × 20 cm \/ Champagne \/ Unit","offer_id":53597552574811,"sku":"PIPOB4020FCH","price":52.97,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 20 cm \/ Champagne \/ Pallet","offer_id":53597552607579,"sku":"PIPOB4020FCH-PALET","price":1207.72,"currency_code":"EUR","in_stock":true},{"title":"30 × 30 × 20 cm \/ Champagne \/ Unit","offer_id":53597552640347,"sku":"PIPOB3020FCH","price":28.91,"currency_code":"EUR","in_stock":true},{"title":"30 × 30 × 20 cm \/ Pyrenees \/ Unit","offer_id":53597552771419,"sku":"PIPOB3020FPR","price":28.91,"currency_code":"EUR","in_stock":true},{"title":"30 × 30 × 20 cm \/ Champagne \/ Pallet","offer_id":53597552673115,"sku":"PIPOB3020FCH-PALET","price":659.15,"currency_code":"EUR","in_stock":true},{"title":"30 × 30 × 20 cm \/ Pyrenees \/ Pallet","offer_id":53597552804187,"sku":"PIPOB3020FPR-PALET","price":659.15,"currency_code":"EUR","in_stock":true},{"title":"45 × 45 × 3.5 cm \/ Limestone \/ Unit","offer_id":53597552705883,"sku":"DOMUS4545CZ","price":14.72,"currency_code":"EUR","in_stock":true},{"title":"45 × 45 × 3.5 cm \/ Pyrenees \/ Unit","offer_id":53597552836955,"sku":"DOMUS4545PR","price":14.72,"currency_code":"EUR","in_stock":true},{"title":"45 × 45 × 3.5 cm \/ Limestone \/ Pallet","offer_id":53597552738651,"sku":"DOMUS4545CZ-PALET","price":671.23,"currency_code":"EUR","in_stock":true},{"title":"45 × 45 × 3.5 cm \/ Pyrenees \/ Pallet","offer_id":53597552869723,"sku":"DOMUS4545PR-PALET","price":671.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/chimeneas-poblet.jpg?v=1785342997"},{"product_id":"remate-de-chimenea-coca-diseno-clasico-de-ladrillo","title":"Coca Chimney Cap - Classic Brick Design for Your Roof","description":"\u003ch1\u003eCoca chimney cap: the look of brick with no bricklaying\u003c\/h1\u003e\n\u003cp\u003eBuilding an exposed-brick chimney on the roof means carrying up loose material, setting out courses and trusting the mortar to withstand years of weather. The Coca range gives the same result with precast pieces: each one is molded with \u003cb\u003ethe texture of a terracotta brick\u003c\/b\u003e, so the cap goes up in just a few pieces, with the classic look of exposed brickwork but without its joints, its build time or its maintenance.\u003c\/p\u003e\n\u003ch2\u003e✅ Key advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSelf-centering design:\u003c\/b\u003e the pieces interlock and center themselves, so the assembly goes up plumb with no need to set out each course and with no error building up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo-thickness cap:\u003c\/b\u003e the 40 × 40 and 50 × 50 cm cap pieces vary in thickness from edge to center — 5.5 to 9 cm and 6 to 10 cm respectively. That difference creates a slope: water doesn't pool on the cap, it runs off towards the edges and drips clear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBrick texture with no mortar joints:\u003c\/b\u003e the relief comes from the factory on the visible face, so there are no real joints to wash out, crack or fill with moss over the years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo finishes:\u003c\/b\u003e Siena, the classic terracotta that matches curved roof tiles and traditional façades, and White for the caps, more neutral.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConcrete with no internal reinforcement:\u003c\/b\u003e there's no steel inside for acidic smoke condensates to corrode. Nothing to paint, regrout or replace.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManageable pieces:\u003c\/b\u003e from 14.75 kg for the pillar piece, light enough to carry the whole cap up by hand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ Recommended applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCapping chimneys on homes with a traditional, rustic or Mediterranean look.\u003c\/li\u003e\n\u003cli\u003eTopping chimneys on houses with exposed-brick façades.\u003c\/li\u003e\n\u003cli\u003eRenovating deteriorated brick-built chimneys, without rebuilding.\u003c\/li\u003e\n\u003cli\u003eBuilding up short chimneys that don't reach the recommended height above the ridge.\u003c\/li\u003e\n\u003cli\u003eVentilation and boiler outlets visible from the street.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: concrete with a brick texture, no internal reinforcement.\u003c\/li\u003e\n\u003cli\u003e30 × 30 × 24 cm pillar piece: 14.75 kg per unit; pallet of 24 units, 370 kg.\u003c\/li\u003e\n\u003cli\u003e40 × 40 × 24 cm pillar piece: 19.65 kg per unit; pallet 488 kg.\u003c\/li\u003e\n\u003cli\u003e40 × 40 cm cap, 5.5 to 9 cm thick: 20.4 kg per unit; pallet 506 kg.\u003c\/li\u003e\n\u003cli\u003e50 × 50 cm cap, 6 to 10 cm thick: 35.6 kg per unit; pallet 514 kg.\u003c\/li\u003e\n\u003cli\u003eColors available: Siena for the pillar pieces, White for the caps.\u003c\/li\u003e\n\u003cli\u003eAssembly: self-centering.\u003c\/li\u003e\n\u003cli\u003eUse: outdoor, on the roof.\u003c\/li\u003e\n\u003cli\u003ePackaging: single unit or pallet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e🧰 Installation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMeasure the outer section of the flue and choose the pillar piece that wraps it, plus the cap that tops it.\u003c\/li\u003e\n\u003cli\u003eLevel the existing top with mortar to get a horizontal plane for the first course to start on.\u003c\/li\u003e\n\u003cli\u003eBed the first piece with mortar and check it's plumb: it's the only one you need to plumb carefully, since the self-centering fit aligns the rest.\u003c\/li\u003e\n\u003cli\u003eStack the courses needed, always keeping the internal flue section clear.\u003c\/li\u003e\n\u003cli\u003eFinish with the cap, checking that the thicker side sits at the center so the slope drains towards the edges.\u003c\/li\u003e\n\u003cli\u003eSeal the support perimeter and clean mortar off the visible face before it hardens.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e📦 Available formats\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e30 × 30 × 24 cm pillar piece in Siena, single unit or pallet.\u003c\/li\u003e\n\u003cli\u003e40 × 40 × 24 cm pillar piece in Siena, single unit or pallet.\u003c\/li\u003e\n\u003cli\u003e40 × 40 cm cap (5.5-9 cm thick) in White, single unit or pallet.\u003c\/li\u003e\n\u003cli\u003e50 × 50 cm cap (6-10 cm thick) in White, single unit or pallet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e don't fit the cap upside down. It sounds obvious, but with these variable-thickness pieces it happens more often than you'd think: fitted the wrong way round, the slope runs inward and water collects in the center, right above the flue mouth, seeps through the joint and runs down the duct carrying soot with it. The thick side always goes in the center. And if the chimney is too short, use the chance to build it up now: standard good practice in Spain is for the mouth to sit 1 m above the highest point within a 2 m radius, and each course of these pieces gives you 24 cm of height with the cap already finished.\u003c\/p\u003e\u003c\/blockquote\u003e","brand":"Vetonek","offers":[{"title":"50 × 50 × 6 × 10 cm \/ White \/ Unit","offer_id":53597553066331,"sku":"CP50B","price":40.61,"currency_code":"EUR","in_stock":true},{"title":"50 × 50 × 6 × 10 cm \/ White \/ Pallet","offer_id":53597553099099,"sku":"CP50B-PALET","price":540.11,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 5.5 × 9 cm \/ White \/ Unit","offer_id":53597553131867,"sku":"CP40B","price":24.54,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 5.5 × 9 cm \/ White \/ Pallet","offer_id":53597553164635,"sku":"CP40B-PALET","price":559.51,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 24 cm \/ Sienna \/ Unit","offer_id":53597553197403,"sku":"PBRIQ40FSI","price":66.17,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 24 cm \/ Sienna \/ Pallet","offer_id":53597553230171,"sku":"PBRIQ40FSI-PALET","price":1508.68,"currency_code":"EUR","in_stock":true},{"title":"30 × 30 × 24 cm \/ Sienna \/ Unit","offer_id":53597553262939,"sku":"PBRIQ30FSI","price":37.43,"currency_code":"EUR","in_stock":true},{"title":"30 × 30 × 24 cm \/ Sienna \/ Pallet","offer_id":53597553295707,"sku":"PBRIQ30FSI-PALET","price":853.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/chimeneas-briqueta.jpg?v=1784099841"},{"product_id":"persiana-de-hormigon-para-ventilacion","title":"Concrete Shutters for Construction and Garden ","description":"\u003cp\u003eThe \u003cstrong\u003eFixed Louver Blinds\u003c\/strong\u003e are an efficient solution for continuous ventilation in industrial and residential applications. Entirely made of concrete, these blinds are impervious to weathering and require no maintenance of any kind.\u003c\/p\u003e\n\u003cp\u003eTheir design allows for optimal ventilation, making them ideal for:\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003eDrying rooms\u003c\/li\u003e\n    \u003cli\u003eTransformer kiosks\u003c\/li\u003e\n    \u003cli\u003eMarkets\u003c\/li\u003e\n    \u003cli\u003eGarages\u003c\/li\u003e\n    \u003cli\u003ePantries\u003c\/li\u003e\n    \u003cli\u003eHeating rooms\u003c\/li\u003e\n    \u003cli\u003eCellars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDimensions and ventilation areas\u003c\/h3\u003e\n\u003cp\u003eOur available models adapt to various projects, with ventilation areas ranging from \u003cstrong\u003e190 cm²\u003c\/strong\u003e to \u003cstrong\u003e1,414 cm²\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eAvailable sizes and colors\u003c\/h3\u003e\n\u003cp\u003eThe blinds are offered in the following sizes and colors:\u003c\/p\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 40 × 20 × 8 cm - Color: White, Natural Gray, Black\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 40 × 40 × 8 cm - Color: White, Natural Gray, Black\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 50 × 25 × 8 cm - Color: White, Natural Gray, Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUnits per pallet\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e40 × 40 × 8 cm: 56 units per pallet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe design also includes a half-round groove for placing a reinforcing rod, recommended for openings larger than 2 meters, for greater structural safety.\u003c\/p\u003e","brand":"Vetonek","offers":[{"title":"40 × 20 × 8 cm \/ White \/ Unit","offer_id":53597563781467,"sku":"CL4020BB","price":22.28,"currency_code":"EUR","in_stock":true},{"title":"40 × 20 × 8 cm \/ Black \/ Unit","offer_id":53597563978075,"sku":"CL4020BNAN","price":24.51,"currency_code":"EUR","in_stock":true},{"title":"40 × 20 × 8 cm \/ Natural Gray \/ Unit","offer_id":53597564174683,"sku":"CL4020BGN","price":16.43,"currency_code":"EUR","in_stock":true},{"title":"40 × 20 × 8 cm \/ White \/ Pallet","offer_id":53597563814235,"sku":"CL4020BB-PALET","price":3047.9,"currency_code":"EUR","in_stock":true},{"title":"40 × 20 × 8 cm \/ Black \/ Pallet","offer_id":53597564010843,"sku":"CL4020BNAN-PALET","price":3352.97,"currency_code":"EUR","in_stock":true},{"title":"40 × 20 × 8 cm \/ Natural Gray \/ Pallet","offer_id":53597564207451,"sku":"CL4020BGN-PALET","price":2247.62,"currency_code":"EUR","in_stock":true},{"title":"50 × 25 × 8 cm \/ White \/ Unit","offer_id":53597563847003,"sku":"CL5025BB","price":35.41,"currency_code":"EUR","in_stock":true},{"title":"50 × 25 × 8 cm \/ Natural Gray \/ Unit","offer_id":53597564043611,"sku":"CL5025BGN","price":26.21,"currency_code":"EUR","in_stock":true},{"title":"50 × 25 × 8 cm \/ White \/ Pallet","offer_id":53597563879771,"sku":"CL5025BB-PALET","price":3767.62,"currency_code":"EUR","in_stock":true},{"title":"50 × 25 × 8 cm \/ Natural Gray \/ Pallet","offer_id":53597564076379,"sku":"CL5025BGN-PALET","price":5328.49,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 8 cm \/ White \/ Unit","offer_id":53597563912539,"sku":"CL4040BB","price":44.34,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 8 cm \/ Black \/ Unit","offer_id":53597564109147,"sku":"CL4040BNAN","price":48.77,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 8 cm \/ Natural Gray \/ Unit","offer_id":53597564240219,"sku":"CL4040BGN","price":32.85,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 8 cm \/ White \/ Pallet","offer_id":53597563945307,"sku":"CL4040BB-PALET","price":2358.89,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 8 cm \/ Black \/ Pallet","offer_id":53597564141915,"sku":"CL4040BNAN-PALET","price":2594.56,"currency_code":"EUR","in_stock":true},{"title":"40 × 40 × 8 cm \/ Natural Gray \/ Pallet","offer_id":53597564272987,"sku":"CL4040BGN-PALET","price":1747.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/persianas.jpg?v=1784100027"}],"url":"https:\/\/vetonek.com\/en\/collections\/chimeneas-y-ventilacion-de-hormigon.oembed","provider":"Vetonek","version":"1.0","type":"link"}