{"title":"Belt compressors ","description":"\u003cp\u003eBelt-driven compressors, designed to work many hours in a row. The motor runs slowly, the pump head heats up less, and the unit lasts for years in a workshop that is put through its paces every day.\u003c\/p\u003e\u003cp\u003eSingle-phase and three-phase, from 25 to 900 liters, with two-stage versions up to 14 bar for demanding installations.\u003c\/p\u003e ","products":[{"product_id":"compresor-correas-25-litros-3hp","title":"Belt compressor 25 L - 3 HP and 365 L\/min at 10 bar ","description":"\u003ch1\u003e25-liter belt compressor\u003c\/h1\u003e\n\u003cp\u003eA compact belt-driven compressor, which is an unusual combination. What makes it interesting is the speed: it runs at \u003cb\u003e1,375 r.p.m.\u003c\/b\u003e, less than half that of an equivalent direct-drive compressor, and still delivers \u003cb\u003e365 L\/min at 10 bar\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eThat is the whole advantage of the belt: the motor drives the pump head through a pulley, so the head can spin slowly and be large instead of fast and small. Practical consequence: \u003cb\u003eit heats up much less, makes less noise, and can handle full workdays\u003c\/b\u003e where a direct compressor would have to stop to rest.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBelt drive:\u003c\/b\u003e designed to work many hours a day.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10 bar pressure:\u003c\/b\u003e enough margin for demanding tools and long hoses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e365 L\/min\u003c\/b\u003e running at just 1,375 r.p.m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLubricated cast-iron pump head:\u003c\/b\u003e dissipates heat and can be repaired.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eJust 25 liters:\u003c\/b\u003e a professional compressor that still fits in a van.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWorkshops with daily, extended air use.\u003c\/li\u003e\n\u003cli\u003eImpact pneumatic tools and spray painting.\u003c\/li\u003e\n\u003cli\u003eConstruction and jobs that require a true 10 bar.\u003c\/li\u003e\n\u003cli\u003eEquipment rental and professional use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 230 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 365 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,375 r.p.m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 25 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e a belt compressor \u003cb\u003edoes use oil and it needs checking\u003c\/b\u003e. Check the level through the sight glass with the unit cold and level, and change it after the first 100 hours and then every 500 hours. It is the maintenance that separates a pump head that lasts fifteen years from one that seizes up in two.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"Unidad","offer_id":53843554468187,"sku":"CEVIK-CA-PRO25-3MF","price":587.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro25-3mf.jpg?v=1787302008"},{"product_id":"compresor-correas-24-litros-gotele-marcha-en-vacio","title":"24 L belt compressor for stipple paint - 3 HP, 10 bar and idle running ","description":"\u003ch1\u003eSpecial gotelé belt compressor with unloaded running\u003c\/h1\u003e\n\u003cp\u003eThe version prepared for projection of the 3 HP belt compressor. The difference is in the \u003cb\u003eunloaded running system\u003c\/b\u003e: when the tank reaches pressure, the motor \u003cb\u003edoes not stop, it keeps spinning unloaded\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eThis matters much more than it seems in a gotelé job. A normal compressor starts and stops dozens of times per hour, and each start is a current surge and a mechanical удар. With unloaded running, the motor starts once in the morning and then no longer has to work: \u003cb\u003eless wear, fewer thermal trips, and much more stable pressure at the spray gun\u003c\/b\u003e, which in gotelé translates directly into an even grain.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eUnloaded running:\u003c\/b\u003e the motor does not start and stop constantly, it only unloads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStable pressure at the spray gun:\u003c\/b\u003e uniform gotelé grain from start to finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10 bar and 365 L\/min\u003c\/b\u003e with belt drive at 1,375 rpm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFewer current surges:\u003c\/b\u003e ideal when the jobsite electrical installation is limited.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact 24-liter format\u003c\/b\u003e with wheels for moving it around the home.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpraying gotelé and plastic paint.\u003c\/li\u003e\n\u003cli\u003eSprayed mortars and coatings.\u003c\/li\u003e\n\u003cli\u003eSpray painting large surfaces.\u003c\/li\u003e\n\u003cli\u003eAny continuous air work for hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 230 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 365 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,375 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 24 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSystem:\u003c\/b\u003e unloaded running\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e unloaded running has a trade-off worth knowing: \u003cb\u003ethe motor consumes power even when it is not compressing\u003c\/b\u003e. If you are going to take a long break, switch it off at the switch instead of leaving it unloaded the whole time. And at the end of the day, always shut it down with the switch, not by unplugging it: the discharge valve needs to relieve pressure before the next start.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"Unidad","offer_id":53843554500955,"sku":"CEVIK-CA-PRO25-3MFGT","price":753.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro50-3mf.jpg?v=1787302554"},{"product_id":"compresor-correas-100-litros-cabezal-v","title":"Belt compressor 100 L - 3 HP and 336 L\/min with V-head ","description":"\u003ch1\u003e100-liter belt-driven compressor with V-twin pump head\u003c\/h1\u003e\n\u003cp\u003eIt runs at \u003cb\u003e1,100 rpm\u003c\/b\u003e, the lowest speed in the entire single-phase range. That is the factor that truly determines a compressor’s service life: fewer revolutions mean less friction, less heat, and a pump head that can work for fifteen years without problems.\u003c\/p\u003e\n\u003cp\u003eIt combines \u003cb\u003ebelt drive\u003c\/b\u003e with a \u003cb\u003eV-twin pump head\u003c\/b\u003e and a \u003cb\u003e100-liter tank\u003c\/b\u003e. It is the classic configuration of a fixed workshop compressor: plenty of reserve, constant flow of \u003cb\u003e336 L\/min\u003c\/b\u003e, and operation from a 230 V outlet, without the need for three-phase power.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOnly 1,100 rpm:\u003c\/b\u003e the lowest speed in the single-phase range, and the one that lasts the longest.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLubricated and repairable V-twin pump head\u003c\/b\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e100-liter tank:\u003c\/b\u003e long and spaced-out cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e336 L\/min sustained\u003c\/b\u003e for multiple air outlets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSingle-phase:\u003c\/b\u003e workshop power without special electrical installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFixed air installation in an auto or bodywork workshop.\u003c\/li\u003e\n\u003cli\u003eExtended daily use with pneumatic tools.\u003c\/li\u003e\n\u003cli\u003eSpray painting and finishing work.\u003c\/li\u003e\n\u003cli\u003eCarpentry, assembly, and industrial maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical data sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 230 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 8 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 336 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,100 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 100 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePump head:\u003c\/b\u003e V-twin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e check the \u003cb\u003ebelt tension\u003c\/b\u003e every six months. With your finger, at the midpoint between pulleys, it should give about one centimeter: if it slips, you lose flow without noticing and it gets glazed; if it’s too tight, you’ll damage the motor bearings. It’s a one-minute job, and almost nobody does it.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"Unidad","offer_id":53843557777755,"sku":"CEVIK-CA-PRO100VC-3M","price":420.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro100vc-3m.jpg?v=1787302008"},{"product_id":"compresor-correas-50-litros-3hp","title":"Belt compressor 50 L - 3 HP and 320 L\/min at 10 bar ","description":"\u003ch1\u003e50-liter belt compressor\u003c\/h1\u003e\n\u003cp\u003eThe logical entry point into the world of belt compressors: \u003cb\u003e50 liters, 3 HP and 10 bar\u003c\/b\u003e, with a size that can still be moved around the workshop without hassle.\u003c\/p\u003e\n\u003cp\u003eCompared with a direct-drive compressor at roughly the same price, here you are not buying more airflow: you are buying \u003cb\u003ehours of life\u003c\/b\u003e. The belt allows the head to spin at half the revolutions, and a lubricated cast-iron head turning slowly can withstand daily use that would burn out a direct compressor in a couple of seasons.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBelt drive:\u003c\/b\u003e designed to work every day, for many hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10 bar maximum pressure\u003c\/b\u003e versus the usual 8 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e320 L\/min\u003c\/b\u003e of sustained airflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLubricated cast-iron head:\u003c\/b\u003e dissipates heat and can be repaired.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e50 liters with wheels:\u003c\/b\u003e professional yet manageable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMechanical and bodywork workshop with daily use.\u003c\/li\u003e\n\u003cli\u003eImpact tools, ratchets, and light pneumatic sanding.\u003c\/li\u003e\n\u003cli\u003eSpray painting and finishing.\u003c\/li\u003e\n\u003cli\u003eProfessional carpentry and assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 230 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAirflow:\u003c\/b\u003e 320 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,420 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 50 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt drive\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e the most expensive mistake when first using a belt compressor is \u003cb\u003estarting it without removing the transport plug from the crankcase\u003c\/b\u003e or without checking the oil level. Many come without oil from the factory to prevent spills during shipping. Check the sight glass before the first start-up: thirty seconds running dry is enough to seize the head, and that is not covered by the warranty.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"Unidad","offer_id":53843557810523,"sku":"CEVIK-CA-PRO50-3MC","price":489.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro50.3mc.jpg?v=1787302559"},{"product_id":"compresor-correas-100-litros-320-lmin","title":"Belt compressor 100 L - 3 HP and 320 L\/min at 10 bar ","description":"\u003ch1\u003e100-liter, 10-bar belt-driven compressor\u003c\/h1\u003e\n\u003cp\u003eThe benchmark workshop compressor: \u003cb\u003e100-liter tank, 3 HP and 10 bar\u003c\/b\u003e with belt drive, running on a standard 230 V outlet.\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003e10 bar\u003c\/b\u003e are more important than they seem. Between hose pressure loss, the regulator filter, and the margin the pressure switch needs so it is not starting nonstop, if the compressor only reaches 8 bar you end up working at 5.5 at the nozzle. Starting from 10 bar gives you a buffer for the entire system.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e10 bar pressure:\u003c\/b\u003e real margin for long hose runs and multiple outlets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBelt drive:\u003c\/b\u003e designed for everyday use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e100-liter reserve:\u003c\/b\u003e long cycles, relaxed motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e320 L\/min\u003c\/b\u003e of sustained airflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSingle-phase 230 V:\u003c\/b\u003e no three-phase installation needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFixed air installation in a workshop or small warehouse.\u003c\/li\u003e\n\u003cli\u003eImpact tools, ratchets, and blow guns.\u003c\/li\u003e\n\u003cli\u003eSpray painting and sheet-metal work.\u003c\/li\u003e\n\u003cli\u003eProfessional carpentry and light industrial assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 230 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 320 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,420 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 100 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt-driven\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e do not rigidly anchor the compressor to the floor thinking it will vibrate less. With the feet bolted to concrete, \u003cb\u003ethe vibration is transmitted throughout the whole workshop\u003c\/b\u003e and the tank welds are subjected to fatigue. Put anti-vibration rubber pads under it and let the unit rest on them: it lasts longer and is quieter.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"Unidad","offer_id":53843564396891,"sku":"CEVIK-CA-PRO100-3MC","price":528.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro50.3mc_d70fc739-b82a-409e-add5-41f5b9793a24.jpg?v=1787302565"},{"product_id":"compresor-correas-100-litros-365-lmin","title":"Belt compressor 100 L - 3 HP and 365 L\/min, single-phase or three-phase ","description":"\u003ch1\u003e100-liter belt compressor and 365 L\/min\u003c\/h1\u003e\n\u003cp\u003eThe highest-flow version of the 100-liter belt compressor: \u003cb\u003e365 L\/min at 10 bar\u003c\/b\u003e running at only \u003cb\u003e1,375 r.p.m.\u003c\/b\u003e. Available in \u003cb\u003e230 V single-phase\u003c\/b\u003e and \u003cb\u003e400 V three-phase\u003c\/b\u003e, so you can choose according to the power supply you have in the workshop.\u003c\/p\u003e\n\u003cp\u003eIf you have three-phase, it’s worth it. A three-phase motor starts without a capacitor, spreads the effort across three phases, and does not have the brutal current surge of single-phase: \u003cb\u003eit runs cooler, lasts longer, and uses power more efficiently\u003c\/b\u003e. If you only have single-phase, the 230 V version gives you exactly the same flow and pressure.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e365 L\/min at 10 bar:\u003c\/b\u003e the highest flow among the 100-liter belt compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo versions:\u003c\/b\u003e 230 V single-phase or 400 V three-phase, same performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOnly 1,375 r.p.m.:\u003c\/b\u003e low speed and long head life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBelt drive\u003c\/b\u003e for extended daily use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e100-liter tank\u003c\/b\u003e with wheels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFixed workshop pneumatic installation with multiple outlets.\u003c\/li\u003e\n\u003cli\u003eImpact tools, sanders, and blow guns.\u003c\/li\u003e\n\u003cli\u003eSpray painting and bodywork.\u003c\/li\u003e\n\u003cli\u003eWorkshops with air use throughout the day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 230 V (CA-PRO100-3MF) or 400 V three-phase (CA-PRO100-3TF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 365 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,375 r.p.m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 100 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt-driven\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e if you choose the three-phase version, \u003cb\u003echeck the direction of rotation on the first start-up\u003c\/b\u003e. A three-phase motor will spin in reverse if two phases are swapped, and the compressor seems to work but does not build pressure and heats up the head. This is corrected by swapping two phases at the terminal block; check the arrow on the flywheel before putting it into service.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"Single-phase 230 V","offer_id":53843564462427,"sku":"CEVIK-CA-PRO100-3MF","price":636.02,"currency_code":"EUR","in_stock":true},{"title":"Three-phase 400 V","offer_id":53843564495195,"sku":"CEVIK-CA-PRO100-3TF","price":735.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro100-3mf.jpg?v=1787302035"},{"product_id":"compresor-correas-150-litros","title":"Belt compressor 150 L - 3 HP and 365 L\/min, single-phase or three-phase ","description":"\u003ch1\u003e150-liter belt-driven compressor\u003c\/h1\u003e\n\u003cp\u003eThe jump to \u003cb\u003e150 liters\u003c\/b\u003e is made for one specific reason: when you have several air outlets and you don’t know how many will be used at the same time. With that reserve, the compressor absorbs simultaneous demand without anyone’s tool pressure dropping.\u003c\/p\u003e\n\u003cp\u003eIt features a \u003cb\u003e3 HP group at 1,375 r.p.m.\u003c\/b\u003e with belt transmission and delivers \u003cb\u003e365 L\/min at 10 bar\u003c\/b\u003e. Available in \u003cb\u003esingle-phase 230 V\u003c\/b\u003e and \u003cb\u003ethree-phase 400 V\u003c\/b\u003e: same performance, choose according to your workshop’s installation.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e150 liters of reserve:\u003c\/b\u003e absorbs simultaneous consumption without dropping pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e365 L\/min at 10 bar\u003c\/b\u003e continuously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo electrical versions:\u003c\/b\u003e single-phase 230 V or three-phase 400 V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1,375 r.p.m.:\u003c\/b\u003e low speed, little wear, low noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBelt transmission\u003c\/b\u003e for continuous use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWorkshop pneumatic installations with multiple outlets.\u003c\/li\u003e\n\u003cli\u003eMechanical and bodywork shops with two or three operators.\u003c\/li\u003e\n\u003cli\u003ePainting, pneumatic sanding, and impact tools.\u003c\/li\u003e\n\u003cli\u003eIndustrial carpentry and small assembly lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 230 V (CA-PRO150-3MF) or 400 V three-phase (CA-PRO150-3TF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 365 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,375 r.p.m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 150 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt-driven\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e from 100 liters onward, the tank falls under the scope of the Spanish pressure equipment regulations and \u003cb\u003eperiodic inspection\u003c\/b\u003e is required. File away the declaration of conformity and the tank plate the day it is delivered: recovering that documentation years later is a headache you can avoid with a folder.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"Single-phase 230 V","offer_id":53843567575387,"sku":"CEVIK-CA-PRO150-3MF","price":735.0,"currency_code":"EUR","in_stock":true},{"title":"Three-phase 400 V","offer_id":53843567608155,"sku":"CEVIK-CA-PRO150-3TF","price":822.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro200-3tf.jpg?v=1787302614"},{"product_id":"compresor-correas-200-litros-3hp","title":"Belt compressor 200 L - 3 HP and 365 L\/min, single-phase or three-phase ","description":"\u003ch1\u003e200-liter belt-driven compressor\u003c\/h1\u003e\n\u003cp\u003eTwo hundred liters of tank capacity with a \u003cb\u003e3 HP\u003c\/b\u003e unit. It may seem oversized, and it is exactly the opposite: with such a large tank the compressor runs in \u003cb\u003every long, widely spaced cycles\u003c\/b\u003e, stays cool, and spends most of the day stopped. It is the configuration that delivers the most years of service per euro invested.\u003c\/p\u003e\n\u003cp\u003eDelivers \u003cb\u003e365 L\/min at 10 bar\u003c\/b\u003e at just \u003cb\u003e1,375 rpm\u003c\/b\u003e, with belt drive. Available in \u003cb\u003esingle-phase 230 V\u003c\/b\u003e and \u003cb\u003ethree-phase 400 V\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e200 liters:\u003c\/b\u003e the largest reserve in the 3 HP range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVery widely spaced cycles:\u003c\/b\u003e the motor works little and lasts a long time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e365 L\/min at 10 bar\u003c\/b\u003e with belt drive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSingle-phase or three-phase\u003c\/b\u003e depending on your installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCooler and drier air:\u003c\/b\u003e the large volume allows moisture to condense.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFixed compressed-air installations in warehouses or workshops.\u003c\/li\u003e\n\u003cli\u003eBodywork and paint shops with several workstations.\u003c\/li\u003e\n\u003cli\u003eImpact and sanding pneumatic tools.\u003c\/li\u003e\n\u003cli\u003eCarpentry, metalwork, and industrial maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 230 V (CA-PRO200-3MF) or three-phase 400 V (CA-PRO200-3TF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 365 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,375 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 200 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrive:\u003c\/b\u003e belt-driven\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e a 200-liter tank takes a long time to fill from empty, and that is the only downside. \u003cb\u003eLeave the compressor on all day\u003c\/b\u003e instead of switching it off at every break: maintaining pressure costs very little energy, while filling it from empty three times a day means fifteen minutes of motor running at full load each time.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"Single-phase 230 V","offer_id":53843567706459,"sku":"CEVIK-CA-PRO200-3MF","price":853.58,"currency_code":"EUR","in_stock":true},{"title":"Three-phase 400 V","offer_id":53843567739227,"sku":"CEVIK-CA-PRO200-3TF","price":940.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro200-3tf_ebae6ed4-578b-45f9-a0c1-12dc5024fb34.jpg?v=1787302634"},{"product_id":"compresor-correas-200-litros-4hp","title":"Belt compressor 200 L - 4 HP and high-performance 539 L\/min ","description":"\u003ch1\u003e200-liter belt compressor and 4 HP\u003c\/h1\u003e\n\u003cp\u003eWith \u003cb\u003e539 L\/min at 10 bar\u003c\/b\u003e, this unit covers what no 3 HP compressor can: \u003cb\u003etrue continuous consumption\u003c\/b\u003e. Pneumatic orbital sanders, small sandblasters, two paint guns working at the same time. Tools that don’t ask for air in bursts, but nonstop.\u003c\/p\u003e\n\u003cp\u003eIt features a \u003cb\u003ehigh-performance pump head\u003c\/b\u003e with belt drive at \u003cb\u003e1,400 rpm\u003c\/b\u003e on a \u003cb\u003e200-liter receiver tank\u003c\/b\u003e. Available in \u003cb\u003esingle-phase 230 V\u003c\/b\u003e and \u003cb\u003ethree-phase 400 V\u003c\/b\u003e, at the same price: if you have three-phase power in the workshop, choose that version without hesitation.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e539 L\/min:\u003c\/b\u003e airflow for continuous-duty tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-performance pump head:\u003c\/b\u003e more air per revolution and better cooling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e200 liters of reserve\u003c\/b\u003e for simultaneous peaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSingle-phase or three-phase\u003c\/b\u003e with no price difference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10 bar\u003c\/b\u003e with belt drive at low speed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is used for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePneumatic sanding and sheet metal preparation.\u003c\/li\u003e\n\u003cli\u003ePaint booths with continuous consumption.\u003c\/li\u003e\n\u003cli\u003eWorkshop installations with several simultaneous stations.\u003c\/li\u003e\n\u003cli\u003eMetalworking, industrial maintenance, and large workshops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 230 V (CA-PRO200-4MF) or 400 V three-phase (CA-PRO200-4TF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 4 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 539 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,400 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 200 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePump head:\u003c\/b\u003e high performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e the two versions cost the same, so the decision is purely about installation. Watch out for one detail: \u003cb\u003ethe three-phase version does not include built-in thermal protection like the single-phase one\u003c\/b\u003e; you must install a motor protection switch calibrated in the panel. If you don’t and one phase jams, the motor will burn out without warning.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"Single-phase 230 V","offer_id":53843571573083,"sku":"CEVIK-CA-PRO200-4MF","price":1224.02,"currency_code":"EUR","in_stock":true},{"title":"Three-phase 400 V","offer_id":53843571605851,"sku":"CEVIK-CA-PRO200-4TF","price":1224.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro200-4mf1.jpg?v=1787302639"},{"product_id":"compresor-trifasico-correas-270-litros-doble-etapa","title":"Three-phase belt-driven compressor 270 L - 5.5 HP, 11 bar and double stage ","description":"\u003ch1\u003eThree-phase 270-liter two-stage compressor\u003c\/h1\u003e\n\u003cp\u003e\u003cb\u003eTwo-stage compression\u003c\/b\u003e is what separates an industrial compressor from a workshop one. Instead of compressing the air all at once to the final pressure, it does it in two steps: a large cylinder raises the air to intermediate pressure, it cools along the way, and a second, smaller cylinder finishes it off up to \u003cb\u003e11 bar\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eThe result is that \u003cb\u003ethe air comes out much cooler, the head suffers less, and efficiency per kilowatt consumed is noticeably better\u003c\/b\u003e. That is why all compressors designed to operate daily for years are two-stage. This one uses \u003cb\u003e5.5 HP three-phase\u003c\/b\u003e, delivers \u003cb\u003e550 L\/min\u003c\/b\u003e, and rests on a \u003cb\u003e270-liter tank\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTwo-stage compression:\u003c\/b\u003e less temperature, better performance, longer life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e11 bar pressure\u003c\/b\u003e for demanding installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e550 L\/min\u003c\/b\u003e of sustained airflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e270-liter tank:\u003c\/b\u003e industrial-level reserve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e5.5 HP three-phase motor:\u003c\/b\u003e smooth startup and efficient consumption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompressed-air installations in industrial warehouses.\u003c\/li\u003e\n\u003cli\u003eBodywork and paint shops with several workstations.\u003c\/li\u003e\n\u003cli\u003eContinuous-duty pneumatic tools.\u003c\/li\u003e\n\u003cli\u003eProduction lines and pneumatic tooling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 400 V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 5.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 11 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 550 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,510 r.p.m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 270 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt-driven\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompression:\u003c\/b\u003e two-stage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e in a two-stage compressor, \u003cb\u003echeck the intercooler tube\u003c\/b\u003e —the one that connects the two finned cylinders—. It fills with dust and dirt, stops dissipating heat, and then the second cylinder receives hot air: consumption goes up, the oil carbonizes, and the valves start to fail. A thorough blow-out every three months solves it.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"Unidad","offer_id":53843571704155,"sku":"CEVIK-CA-PRO300-5.5TF","price":1253.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro300-5-5tf.jpg?v=1787302656"},{"product_id":"compresor-trifasico-270-litros-cabezal-alto-rendimiento","title":"Three-phase compressor 270 L double stage - 5.5 HP and high-performance head ","description":"\u003ch1\u003eThree-phase 270-liter compressor with high-performance head\u003c\/h1\u003e\n\u003cp\u003eSame power of \u003cb\u003e5.5 HP\u003c\/b\u003e as the standard model, but with a \u003cb\u003ehigh-performance head running at only 1,000 rpm\u003c\/b\u003e. The result is devastating: it delivers between \u003cb\u003e662 and 727 L\/min\u003c\/b\u003e —more than 20% above— while turning a third slower.\u003c\/p\u003e\n\u003cp\u003eThat is the criterion professionals use to judge a compressor: \u003cb\u003eliters per minute per revolution of the head\u003c\/b\u003e. A large, slow head delivers more air, heats up less, and lasts for decades; a small, fast one gives the same but wears out five times more. With \u003cb\u003etwo-stage compression\u003c\/b\u003e up to \u003cb\u003e11 bar\u003c\/b\u003e and a \u003cb\u003e270-liter\u003c\/b\u003e tank.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOnly 1,000 rpm:\u003c\/b\u003e the lowest speed in the catalog, the one that gives the most life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUp to 727 L\/min\u003c\/b\u003e with 5.5 HP, thanks to the high-performance head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo-stage at 11 bar:\u003c\/b\u003e cooler air and better energy efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo flow versions\u003c\/b\u003e to adjust the investment to your real consumption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e270-liter tank\u003c\/b\u003e on fixed legs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFixed compressed air installations in an industrial warehouse.\u003c\/li\u003e\n\u003cli\u003eBlasting, pneumatic sanding, and paint booths.\u003c\/li\u003e\n\u003cli\u003eMultiple workstations with simultaneous consumption.\u003c\/li\u003e\n\u003cli\u003eContinuous-use pneumatic production and tooling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 400 V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 5.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 11 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 662 L\/min (CA-PRO300-K28TF) or 727 L\/min (CA-PRO300-K30TF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 270 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt-driven\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompression:\u003c\/b\u003e two-stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHead:\u003c\/b\u003e high-performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e between the K28 and the K30 there are only 65 L\/min of difference, so the criterion is not peak flow: it is \u003cb\u003ehow long you want the compressor to stay idle\u003c\/b\u003e. If your average consumption is around 600 L\/min, the K28 will be running almost nonstop and the K30 will have room to cool down. In installations that work eight hours, that margin translates into years of useful life.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"K28 - 662 L\/min","offer_id":53843573604699,"sku":"CEVIK-CA-PRO300-K28TF","price":1665.02,"currency_code":"EUR","in_stock":true},{"title":"K30 - 727 L\/min","offer_id":53843573637467,"sku":"CEVIK-CA-PRO300-K30TF","price":1763.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro300-k30.jpg?v=1787302662"},{"product_id":"compresor-trifasico-7-5hp-875-lmin-doble-etapa","title":"Three-phase compressor 7.5 HP - 875 L\/min at 11 bar, 270 or 500 L tank ","description":"\u003ch1\u003eThree-phase 7.5 HP two-stage compressor\u003c\/h1\u003e\n\u003cp\u003e\u003cb\u003e875 L\/min at 11 bar\u003c\/b\u003e, running at only \u003cb\u003e1,200 rpm\u003c\/b\u003e. With this flow, it can already supply an entire workshop: several air lines, large impact tools, sanding, and blasting at the same time.\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003ehigh-performance two-stage pump head\u003c\/b\u003e compresses in two steps with intermediate cooling, which greatly lowers the air outlet temperature and improves efficiency per kilowatt. You can choose the tank: \u003cb\u003e270 liters\u003c\/b\u003e if space is the priority, or \u003cb\u003e500 liters\u003c\/b\u003e if you prefer the compressor to start as infrequently as possible.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e875 L\/min at 11 bar:\u003c\/b\u003e real industrial airflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo-stage with intermediate cooling:\u003c\/b\u003e cooler air and less wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOnly 1,200 rpm:\u003c\/b\u003e large, slow pump head designed to last for decades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eChoose a 270- or 500-liter tank\u003c\/b\u003e depending on space and consumption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7.5 HP three-phase motor\u003c\/b\u003e with soft start.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFixed compressed-air installations in industrial warehouses.\u003c\/li\u003e\n\u003cli\u003eBlasting, sanding, and professional paint booths.\u003c\/li\u003e\n\u003cli\u003eWorkshops with several stations consuming air at the same time.\u003c\/li\u003e\n\u003cli\u003eProduction, pneumatic tooling, and industrial maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical data sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 400 V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 7.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 11 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 875 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,200 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 270 liters (CA-PRO300-7.5TF) or 500 liters (CA-PRO500-7.5TF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt-driven\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompression:\u003c\/b\u003e two-stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePump head:\u003c\/b\u003e high performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e with 875 L\/min available, the bottleneck is no longer the compressor but \u003cb\u003ethe installation piping\u003c\/b\u003e. A half-inch tube cannot carry that flow without a huge pressure drop: for this machine, think of a main line of at least 1\", in a closed loop if the warehouse is large. Without that, you will have paid for a 7.5 HP compressor to work like a 4 HP unit.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"270 liters","offer_id":53843579273563,"sku":"CEVIK-CA-PRO300-7.5TF","price":1959.02,"currency_code":"EUR","in_stock":true},{"title":"500 liters","offer_id":53843579306331,"sku":"CEVIK-CA-PRO500-7.5TF","price":2057.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/pro500-7.5tf.jpg?v=1787302681"},{"product_id":"compresor-trifasico-500-litros-10hp","title":"Three-phase compressor 500 L and 10 HP - 1,074 L\/min at 11 bar double stage ","description":"\u003ch1\u003e500-liter Three-Phase Compressor and 10 HP\u003c\/h1\u003e\n\u003cp\u003eMore than \u003cb\u003eone thousand liters of air per minute at 11 bar\u003c\/b\u003e on a \u003cb\u003e500-liter\u003c\/b\u003e tank, with the high-performance head turning at only \u003cb\u003e1,000 r.p.m.\u003c\/b\u003e It is the top-of-the-range piston compressor, the one that replaces a small screw compressor in installations that do not operate 24 hours a day.\u003c\/p\u003e\n\u003cp\u003eIt is offered in two versions that differ in the starting system. The standard version starts \u003cb\u003edirect-on-line\u003c\/b\u003e. The \u003cb\u003estar-delta\u003c\/b\u003e version includes a control panel that starts the motor in star configuration —at reduced voltage— and switches to delta once it is already running, \u003cb\u003ereducing the starting current peak to one third\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e1,074 L\/min at 11 bar:\u003c\/b\u003e flow rate for a complete industrial installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo-stage\u003c\/b\u003e with intercooling and cooler outlet air.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1,000 r.p.m.:\u003c\/b\u003e the lowest possible speed, maximum durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e500 liters of reserve\u003c\/b\u003e for very long cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStar-delta option\u003c\/b\u003e for installations with tight contracted power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompressed air networks in industrial buildings.\u003c\/li\u003e\n\u003cli\u003eSandblasting, shot blasting, and paint booths.\u003c\/li\u003e\n\u003cli\u003eProduction lines with pneumatic tooling.\u003c\/li\u003e\n\u003cli\u003eLarge workshops with many simultaneous workstations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 400 V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 10 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 11 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 1,074 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,000 r.p.m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 500 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt-driven\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompression:\u003c\/b\u003e two-stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStarting:\u003c\/b\u003e direct (CA-PRO500-10TF) or star-delta (CA-PRO500-10TSD)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e the star-delta version is not a luxury: it is what prevents \u003cb\u003ethe starting surge of a 10 HP unit from tripping your installation or pushing your electricity contract charge higher on the bill\u003c\/b\u003e. If your contracted power is tight or you share the panel with sensitive machines, the price difference pays for itself. Check with your electrician before deciding.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"Direct","offer_id":53843579339099,"sku":"CEVIK-CA-PRO500-10TF","price":2793.0,"currency_code":"EUR","in_stock":true},{"title":"Star-delta","offer_id":53843579371867,"sku":"CEVIK-CA-PRO500-10TSD","price":3233.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro500-10tf.jpg?v=1787302036"},{"product_id":"compresor-trifasico-270-litros-14-bar","title":"Three-phase compressor 270 L, 14 bar - 5.5 HP and double stage at 650 rpm ","description":"\u003ch1\u003eThree-phase 270-liter compressor and 14 bar\u003c\/h1\u003e\n\u003cp\u003eThere are jobs that simply cannot be done with 10 or 11 bar: \u003cb\u003epneumatic presses, test benches, assembly tooling, and certain injection machines require 12 or 13 bar at the outlet\u003c\/b\u003e. That’s what this unit is for, delivering \u003cb\u003e14 bar\u003c\/b\u003e and leaving plenty of margin.\u003c\/p\u003e\n\u003cp\u003eWhat’s striking is how it achieves this: running at \u003cb\u003e650 r.p.m.\u003c\/b\u003e, the lowest speed in the entire catalog. A high-performance \u003cb\u003edouble-stage\u003c\/b\u003e head moving air very slowly, which is the classic formula for compressors that spend twenty years in a workshop without causing problems.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e14 bar of pressure:\u003c\/b\u003e for applications that cannot be reached with 10 or 11 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOnly 650 r.p.m.:\u003c\/b\u003e minimal wear and very smooth operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble stage\u003c\/b\u003e with interstage cooling required at this pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e472 L\/min\u003c\/b\u003e of sustained flow at 14 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e270-liter tank\u003c\/b\u003e on fixed legs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure pneumatic presses and tooling.\u003c\/li\u003e\n\u003cli\u003eTest benches and leak testing.\u003c\/li\u003e\n\u003cli\u003eTruck tire and heavy machinery workshops.\u003c\/li\u003e\n\u003cli\u003eIndustrial processes that require more than 11 bar.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 400 V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 5.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 14 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 472 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 650 r.p.m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 270 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt-driven\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompression:\u003c\/b\u003e double stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHead:\u003c\/b\u003e high performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e at 14 bar, the entire installation has to be up to the task. \u003cb\u003eCheck that hoses, fittings, and filters are rated above that pressure\u003c\/b\u003e: a standard workshop hose marked for 10 bar working pressure can burst, and at 14 bar that becomes a dangerous whip. And always install the regulator at the outlet; don’t rely on the machine to withstand line pressure.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"Unidad","offer_id":53843582222683,"sku":"CEVIK-CA-PRO314-5.5TF","price":2057.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro300-k30_0e191571-07f2-4138-8aa8-8241dd416292.jpg?v=1787302706"},{"product_id":"compresor-trifasico-90-litros-doble-etapa","title":"Three-phase compressor 90 L - 5.5 HP and double stage, 11 or 14 bar ","description":"\u003ch1\u003eThree-phase 90-liter twin-stage compressor\u003c\/h1\u003e\n\u003cp\u003eAn industrial compressor with \u003cb\u003e5.5 HP and twin-stage compression\u003c\/b\u003e mounted on a tank of only \u003cb\u003e90 liters\u003c\/b\u003e. It is a combination designed for a very specific case: \u003cb\u003ewhen you need workshop-level performance but the unit has to fit in a small space or be movable\u003c\/b\u003e. It has wheels and a handle, something unthinkable on a 270-liter model.\u003c\/p\u003e\n\u003cp\u003eYou can choose between two configurations depending on what you need: the \u003cb\u003e11 bar\u003c\/b\u003e version prioritizes airflow, with \u003cb\u003e582 L\/min\u003c\/b\u003e; the \u003cb\u003e14 bar\u003c\/b\u003e version prioritizes pressure and delivers \u003cb\u003e497 L\/min\u003c\/b\u003e. Both have a high-performance head and two-stage compression.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTwo-stage in a compact format:\u003c\/b\u003e industrial performance with 90 liters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo versions:\u003c\/b\u003e 11 bar with more airflow or 14 bar high pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-performance head\u003c\/b\u003e running at low speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWith wheels:\u003c\/b\u003e a 5.5 HP compressor that can be moved.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e400 V three-phase motor\u003c\/b\u003e for continuous professional use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWorkshops with limited space and a need for industrial air.\u003c\/li\u003e\n\u003cli\u003eConstruction sites and installations with three-phase power supply.\u003c\/li\u003e\n\u003cli\u003eHigh-pressure pneumatic presses and tooling (14 bar version).\u003c\/li\u003e\n\u003cli\u003eImpact and sanding tools in metalworking workshops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 400 V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 5.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 11 bar (CA-PRO090-5.5TF) or 14 bar (CA-PRO090-5.514B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 582 L\/min at 11 bar or 497 L\/min at 14 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,370 r.p.m. (11 bar) or 1,170 r.p.m. (14 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 90 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompression:\u003c\/b\u003e two-stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHead:\u003c\/b\u003e high performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e with 5.5 HP and only a 90-liter tank, this unit \u003cb\u003estarts much more frequently\u003c\/b\u003e than an equivalent 270-liter one. If it is going to stay fixed in the workshop, consider adding a 100- or 200-liter auxiliary tank connected to the outlet: it costs little, requires nothing special, and significantly extends the motor's life.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"11 bar - 582 L\/min","offer_id":53843582255451,"sku":"CEVIK-CA-PRO090-5.5TF","price":1274.0,"currency_code":"EUR","in_stock":true},{"title":"14 bar - 497 L\/min","offer_id":53843582288219,"sku":"CEVIK-CA-PRO090-5.514B","price":1421.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro90-5.5tf.jpg?v=1787302712"},{"product_id":"compresor-trifasico-500-litros-14-bar","title":"Three-phase 500 L compressor, 14 bar - high pressure in two stages ","description":"\u003ch1\u003eThree-phase 500-liter, 14 bar compressor\u003c\/h1\u003e\n\u003cp\u003eThe top of the range in high pressure: \u003cb\u003e14 bar\u003c\/b\u003e on a \u003cb\u003e500-liter\u003c\/b\u003e tank, with a high-performance \u003cb\u003etwo-stage\u003c\/b\u003e pump head running at just \u003cb\u003e800 rpm\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is designed for installations where network pressure has to stay above normal and can never drop: \u003cb\u003epresses, test benches, assembly tooling and process machines\u003c\/b\u003e. The 500 liters of reserve are what ensure that a large momentary demand does not bring down the pressure throughout the plant.\u003c\/p\u003e\n\u003ch2\u003e✅ Main advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e14 bar of pressure\u003c\/b\u003e with 500 liters of reserve behind it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOnly 800 rpm:\u003c\/b\u003e large, slow pump head, designed to last for decades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo-stage\u003c\/b\u003e with intermediate cooling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo motor options:\u003c\/b\u003e 7.5 HP with 582 L\/min or 10 HP with 857 L\/min.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStar-delta starting\u003c\/b\u003e in the 10 HP version, which reduces the current surge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-pressure air networks in industrial plants.\u003c\/li\u003e\n\u003cli\u003ePneumatic presses and assembly tooling.\u003c\/li\u003e\n\u003cli\u003eTest benches and leak testing.\u003c\/li\u003e\n\u003cli\u003eWorkshops for heavy machinery and truck tires.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical data sheet\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eVoltage:\u003c\/b\u003e 400 V three-phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower:\u003c\/b\u003e 7.5 HP (CA-PRO514-7.5TF) or 10 HP (CA-PRO514-10TET)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 14 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow rate:\u003c\/b\u003e 582 L\/min (7.5 HP) or 857 L\/min (10 HP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 800 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 500 liters\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTransmission:\u003c\/b\u003e belt-driven\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompression:\u003c\/b\u003e two-stage\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePump head:\u003c\/b\u003e high-performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStarting:\u003c\/b\u003e star-delta in the 10 HP version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Professional tip:\u003c\/b\u003e the most expensive mistake in a 14 bar installation is \u003cb\u003edistributing that pressure throughout the entire plant\u003c\/b\u003e. It is unnecessary and costly: every extra bar increases electricity consumption by around 7%. Distribute at the pressure most of your machines require and install a local regulator only at the point that needs the 14 bar. You will notice it on the electricity bill from the first month.\u003c\/p\u003e\u003c\/blockquote\u003e ","brand":"Cevik","offers":[{"title":"7.5 HP - 582 L\/min","offer_id":53843587137883,"sku":"CEVIK-CA-PRO514-7.5TF","price":2645.02,"currency_code":"EUR","in_stock":true},{"title":"10 HP - 857 L\/min (star-delta)","offer_id":53843587170651,"sku":"CEVIK-CA-PRO514-10TET","price":3723.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/ca-pro500-7.5tf.jpg?v=1787302735"}],"url":"https:\/\/vetonek.com\/en\/collections\/compresores-de-correas.oembed","provider":"Vetonek","version":"1.0","type":"link"}