{"title":"Pneumatic Tools","description":"\u003cp\u003eProfessional \u003cstrong\u003epneumatic tools\u003c\/strong\u003e to connect to your compressor: impact wrenches, drills, screwdrivers, sanders, multi-tools, riveters, shears, staplers, nailers and spray guns for paint, texture coating, blowing and sandblasting.\u003c\/p\u003e\u003cp\u003eMore power and less weight than the equivalent electric tools, ideal for mechanical workshops, carpentry, bodywork and industrial maintenance.\u003c\/p\u003e","products":[{"product_id":"taladro-neumatico-10-mm-aeropro","title":"10 mm pneumatic drill","description":"\u003cp\u003eIf you already have a compressor in the workshop, a pneumatic drill is the most convenient way to drill every day: no power cable, no electric motor that overheats and a \u003cb\u003elight, easy-to-handle\u003c\/b\u003e body. This \u003cb\u003e10 mm Aeropro pneumatic drill\u003c\/b\u003e is designed for workshops, bodywork and maintenance.\u003c\/p\u003e\n\u003cp\u003eWith capacity for \u003cb\u003edrill bits up to 10 mm\u003c\/b\u003e, it covers most holes in sheet metal, profiles, wood and plastic. Because it runs on \u003cb\u003ecompressed air\u003c\/b\u003e, it withstands continuous work and is safer in damp or dusty environments.\u003c\/p\u003e\n\u003cp\u003eCombine it with a rubber hose with quick coupler, an in-line lubricator and a set of quality metal drill bits, and you will have a complete pneumatic drilling station, ready to work all day long.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e10 mm capacity:\u003c\/b\u003e for the most common fixings and holes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePneumatic:\u003c\/b\u003e no electric motor to overheat and no power cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLightweight:\u003c\/b\u003e less fatigue in repetitive jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAeropro brand:\u003c\/b\u003e pneumatic workshop tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eContinuous work:\u003c\/b\u003e ideal for assembly lines and maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrilling sheet metal in bodywork.\u003c\/li\u003e\n\u003cli\u003eDrilling profiles, wood and plastic.\u003c\/li\u003e\n\u003cli\u003eIndustrial and machinery maintenance.\u003c\/li\u003e\n\u003cli\u003eSeries assembly in the workshop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Aeropro\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e pneumatic drill\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCapacity:\u003c\/b\u003e 10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower supply:\u003c\/b\u003e compressed air\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e put a few drops of pneumatic oil into the air inlet before each working day (or use an in-line lubricator): the air motor will thank you for it. Drain the water from the tank so that no moisture reaches the tool.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eOne that delivers the air flow and pressure stated by the manufacturer on the tool; the more spare air flow, the more continuous the work.\u003c\/p\u003e\n\u003ch3\u003eWhat drill bits does it take?\u003c\/h3\u003e\n\u003cp\u003eDrill bits with a shank diameter of up to 10 mm.\u003c\/p\u003e\n\u003ch3\u003eWhat advantage does it have over an electric drill?\u003c\/h3\u003e\n\u003cp\u003eIt is lighter, has no electric motor to overheat and is safer in damp or dusty environments.\u003c\/p\u003e\n\u003ch3\u003eDoes it need maintenance?\u003c\/h3\u003e\n\u003cp\u003eJust lubricate it with pneumatic oil and work with dry, filtered air.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for bodywork?\u003c\/h3\u003e\n\u003cp\u003eYes, it is a common tool in bodywork and maintenance for drilling sheet metal.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"One that delivers the air flow and pressure stated by the manufacturer on the tool; the more spare air flow, the more continuous the work.\"}},{\"@type\":\"Question\",\"name\":\"What drill bits does it take?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Drill bits with a shank diameter of up to 10 mm.\"}},{\"@type\":\"Question\",\"name\":\"What advantage does it have over an electric drill?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is lighter, has no electric motor to overheat and is safer in damp or dusty environments.\"}},{\"@type\":\"Question\",\"name\":\"Does it need maintenance?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Just lubricate it with pneumatic oil and work with dry, filtered air.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for bodywork?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, it is a common tool in bodywork and maintenance for drilling sheet metal.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641397137755,"sku":"CEVIK-NE-RP17102","price":50.96,"currency_code":"EUR","in_stock":true}]},{"product_id":"lijadora-neumatica-rotoorbital-125-mm-michelin","title":"125 mm random orbital air sander with hook-and-loop pad","description":"\u003cp\u003ePreparing a car body or a part for painting calls for fast, mark-free sanding. This \u003cb\u003e125 mm Michelin random orbital air sander\u003c\/b\u003e combines rotation and orbit to \u003cb\u003esand quickly and leave a fine finish\u003c\/b\u003e, without the swirl marks of a rotary sander.\u003c\/p\u003e\n\u003cp\u003eIt is \u003cb\u003elightweight\u003c\/b\u003e, with an \u003cb\u003eergonomic grip\u003c\/b\u003e and systems that \u003cb\u003ereduce vibration\u003c\/b\u003e, so you can work for hours without straining your hand. Its \u003cb\u003ehook-and-loop\u003c\/b\u003e pad lets you change the sanding disc in a second, and it works at a pressure of \u003cb\u003e6 to 8 bar\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRandom orbital action:\u003c\/b\u003e sands fast and leaves a surface ready for painting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e125 mm hook-and-loop pad:\u003c\/b\u003e instant disc changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLow vibration:\u003c\/b\u003e less fatigue during long sanding sessions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLight and ergonomic:\u003c\/b\u003e precise control even on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMichelin brand:\u003c\/b\u003e pneumatic tool designed for bodyshops and industry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSanding fillers and primers in bodywork.\u003c\/li\u003e\n\u003cli\u003eSurface preparation before painting or varnishing.\u003c\/li\u003e\n\u003cli\u003eKeying paints and lacquers.\u003c\/li\u003e\n\u003cli\u003eGeneral sanding of wood, metal and plastics in the workshop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Michelin\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePad diameter:\u003c\/b\u003e 125 mm, hook-and-loop\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAction:\u003c\/b\u003e random orbital\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking pressure:\u003c\/b\u003e 6-8 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 10,000-12,000 rpm as per specification sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower supply:\u003c\/b\u003e compressed air\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e let the sander work under its own weight: pressing too hard slows the pad, heats the surface and leaves marks. Use a filter regulator to work with dry air and an in-line lubricator to look after the air motor.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat discs does it use?\u003c\/h3\u003e\n\u003cp\u003e125 mm hook-and-loop sanding discs.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure does it need?\u003c\/h3\u003e\n\u003cp\u003eBetween 6 and 8 bar.\u003c\/p\u003e\n\u003ch3\u003eWhat is it used for?\u003c\/h3\u003e\n\u003cp\u003eSanding car bodies, preparing surfaces for painting and general sanding in the workshop.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between random orbital and orbital?\u003c\/h3\u003e\n\u003cp\u003eA random orbital sander combines rotation and oscillation: it sands faster than an orbital sander and leaves fewer marks than a rotary one.\u003c\/p\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eAir sanders use quite a lot of air continuously: choose a compressor with good air flow and a tank of 50 litres or more.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What discs does it use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"125 mm hook-and-loop sanding discs.\"}},{\"@type\":\"Question\",\"name\":\"What pressure does it need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Between 6 and 8 bar.\"}},{\"@type\":\"Question\",\"name\":\"What is it used for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Sanding car bodies, preparing surfaces for painting and general sanding in the workshop.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between random orbital and orbital?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A random orbital sander combines rotation and oscillation: it sands faster than an orbital sander and leaves fewer marks than a rotary one.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Air sanders use quite a lot of air continuously: choose a compressor with good air flow and a tank of 50 litres or more.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641417027931,"sku":"CEVIK-CA-2809914252","price":97.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/lijadora-neumatica-rotoorbital-125-mm-michelin-michelin-1.jpg?v=1793864773"},{"product_id":"multiherramienta-oscilante-neumatica","title":"Pneumatic oscillating multi-tool for cutting and sanding","description":"\u003cp\u003eThere are cuts and sanding jobs where neither a saw nor a sander can reach: a door frame, a corner, a joint between tiles. The \u003cb\u003eAeropro pneumatic oscillating multi-tool\u003c\/b\u003e handles them all: it \u003cb\u003ecuts, scrapes and sands\u003c\/b\u003e precisely in tight spaces.\u003c\/p\u003e\n\u003cp\u003eIt works at \u003cb\u003e16,000 oscillations per minute\u003c\/b\u003e, is lightweight and comes with \u003cb\u003ecutting and sanding accessories\u003c\/b\u003e. Because it runs on compressed air, it has no electric motor to overheat: perfect for renovations, interior decoration and furniture restoration. To get the most out of it, connect it to a compressor of at least \u003cb\u003e3 HP\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e3 functions in one:\u003c\/b\u003e flush cutting, scraping and sanding with the same tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e16,000 osc\/min:\u003c\/b\u003e fast progress and clean cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePneumatic and lightweight:\u003c\/b\u003e no electric motor to overheat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAccessories included:\u003c\/b\u003e ready to start working.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement kit available:\u003c\/b\u003e spare blades, scrapers and sanding sheets for this tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFlush cuts in frames, skirting boards and mouldings.\u003c\/li\u003e\n\u003cli\u003eScraping joints, silicone, adhesives and paint.\u003c\/li\u003e\n\u003cli\u003eSanding corners and recesses.\u003c\/li\u003e\n\u003cli\u003eRenovations, interior decoration and furniture restoration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Aeropro\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOscillations:\u003c\/b\u003e 16,000 osc\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir consumption:\u003c\/b\u003e 128 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking pressure:\u003c\/b\u003e 6.3 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended compressor:\u003c\/b\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e red and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIncludes:\u003c\/b\u003e cutting and sanding accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackaging:\u003c\/b\u003e 24 x 16 x 5 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e use a lubricator or put a few drops of pneumatic oil into the air inlet every working day: oscillating tools run at high speed and benefit from it. Let the blade do the cutting, without forcing it.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eOne of around 3 HP that comfortably delivers 128 l\/min at 6.3 bar.\u003c\/p\u003e\n\u003ch3\u003eAre there more accessories?\u003c\/h3\u003e\n\u003cp\u003eYes, there is a replacement kit with discs, scrapers, blades and sanding sheets for this tool.\u003c\/p\u003e\n\u003ch3\u003eWhat jobs can I do?\u003c\/h3\u003e\n\u003cp\u003eFlush cutting, scraping joints and adhesive or paint residue, and sanding corners and recesses.\u003c\/p\u003e\n\u003ch3\u003eWhat advantage does it have over an electric one?\u003c\/h3\u003e\n\u003cp\u003eIt is lighter, has no electric motor to overheat and copes well with continuous work if the compressor delivers the required air flow.\u003c\/p\u003e\n\u003ch3\u003eDoes it need maintenance?\u003c\/h3\u003e\n\u003cp\u003eJust lubricate it with a few drops of pneumatic oil every working day and work with dry, filtered air.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"One of around 3 HP that comfortably delivers 128 l\/min at 6.3 bar.\"}},{\"@type\":\"Question\",\"name\":\"Are there more accessories?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, there is a replacement kit with discs, scrapers, blades and sanding sheets for this tool.\"}},{\"@type\":\"Question\",\"name\":\"What jobs can I do?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Flush cutting, scraping joints and adhesive or paint residue, and sanding corners and recesses.\"}},{\"@type\":\"Question\",\"name\":\"What advantage does it have over an electric one?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is lighter, has no electric motor to overheat and copes well with continuous work if the compressor delivers the required air flow.\"}},{\"@type\":\"Question\",\"name\":\"Does it need maintenance?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Just lubricate it with a few drops of pneumatic oil every working day and work with dry, filtered air.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641417191771,"sku":"CEVIK-NE-RP7636","price":50.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/multiherramienta-oscilante-neumatica-vica-work-1.jpg?v=1793864776"},{"product_id":"juego-llave-impacto-neumatica-michelin","title":"1\/2\" pneumatic impact wrench set with sockets","description":"\u003cp\u003eLoosening wheel nuts or rusty fixings with a wheel brace is slow and exhausting. With this \u003cb\u003eMichelin 1\/2\" pneumatic impact wrench set\u003c\/b\u003e you do it in seconds: up to \u003cb\u003e350 Nm of torque\u003c\/b\u003e to loosen effortlessly and run bolts in at full speed.\u003c\/p\u003e\n\u003cp\u003eIt arrives ready to work in its \u003cb\u003ecarry case\u003c\/b\u003e, with \u003cb\u003e1\/2\" chrome vanadium sockets\u003c\/b\u003e of 11, 12, 13, 14, 17, 19, 22 and 24 mm, a \u003cb\u003e3\/8\" adapter\u003c\/b\u003e and a seal. Everything you need for changing wheels and removing fixings in the workshop, organised and to hand.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum torque of 350 Nm:\u003c\/b\u003e enough to loosen the wheel nuts of cars and vans.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eComplete set in a carry case:\u003c\/b\u003e wrench, 8 sockets, 3\/8\" adapter and seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMichelin brand:\u003c\/b\u003e a benchmark pneumatic tool in workshops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConsumption of 220 L\/min at 6 bar:\u003c\/b\u003e works with standard workshop compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e3\/8\" adapter:\u003c\/b\u003e so you can also use 3\/8\" sockets on smaller fixings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChanging wheels in mechanical and tyre workshops.\u003c\/li\u003e\n\u003cli\u003eRemoving fixings from suspensions, brakes and subframes.\u003c\/li\u003e\n\u003cli\u003eMaintenance of agricultural machinery and light industrial vehicles.\u003c\/li\u003e\n\u003cli\u003eAssembly and disassembly of bolted structures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Michelin\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSquare drive:\u003c\/b\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum torque:\u003c\/b\u003e 350 Nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir consumption:\u003c\/b\u003e 220 L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking pressure:\u003c\/b\u003e 6 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSockets included:\u003c\/b\u003e 1\/2\": 11, 12, 13, 14, 17, 19, 22 and 24 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIncludes:\u003c\/b\u003e 3\/8\" adapter, seal and carry case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e when tightening wheels, do the final tightening with a torque wrench: the impact wrench is for loosening and running nuts in. Put a few drops of pneumatic oil into the air inlet every working day and drain the water from the tank to extend the life of the mechanism.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eOne that delivers at least 220 L\/min at 6 bar; with a tank of 50 L or more you will work more continuously.\u003c\/p\u003e\n\u003ch3\u003eWhich sockets are included?\u003c\/h3\u003e\n\u003cp\u003e1\/2\" sockets of 11, 12, 13, 14, 17, 19, 22 and 24 mm, plus a 3\/8\" adapter.\u003c\/p\u003e\n\u003ch3\u003eWhat torque does it have?\u003c\/h3\u003e\n\u003cp\u003eUp to 350 Nm.\u003c\/p\u003e\n\u003ch3\u003eCan I tighten wheels with it?\u003c\/h3\u003e\n\u003cp\u003eUse it to run the nuts in and do the final tightening with a torque wrench to the torque specified by the vehicle manufacturer.\u003c\/p\u003e\n\u003ch3\u003eWhat hose do I need?\u003c\/h3\u003e\n\u003cp\u003eAn air hose with a quick coupler and a large enough inside diameter so as not to lose air flow; a 6 x 12 mm rubber hose is a good choice for the workshop.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"One that delivers at least 220 L\/min at 6 bar; with a tank of 50 L or more you will work more continuously.\"}},{\"@type\":\"Question\",\"name\":\"Which sockets are included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"1\/2\\\" sockets of 11, 12, 13, 14, 17, 19, 22 and 24 mm, plus a 3\/8\\\" adapter.\"}},{\"@type\":\"Question\",\"name\":\"What torque does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Up to 350 Nm.\"}},{\"@type\":\"Question\",\"name\":\"Can I tighten wheels with it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Use it to run the nuts in and do the final tightening with a torque wrench to the torque specified by the vehicle manufacturer.\"}},{\"@type\":\"Question\",\"name\":\"What hose do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"An air hose with a quick coupler and a large enough inside diameter so as not to lose air flow; a 6 x 12 mm rubber hose is a good choice for the workshop.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Set in carry case","offer_id":54641417552219,"sku":"CEVIK-CA-1126001381","price":48.02,"currency_code":"EUR","in_stock":true}]},{"product_id":"kit-accesorios-multiherramienta-oscilante-neumatica","title":"Accessory kit for pneumatic oscillating multi-tool","description":"\u003cp\u003eAn oscillating multi-tool is only as useful as the accessories you have to hand. With this \u003cb\u003ereplacement kit for the Aeropro NE-RP7636 pneumatic oscillating multi-tool\u003c\/b\u003e you will always have the right blade or sanding sheet to \u003cb\u003ecut, scrape and sand\u003c\/b\u003e without stopping work to look for spares.\u003c\/p\u003e\n\u003cp\u003eIt brings together the parts that wear most: a half-moon \u003cb\u003ediamond polishing disc\u003c\/b\u003e, \u003cb\u003erigid scrapers\u003c\/b\u003e, a \u003cb\u003etriangular sanding pad\u003c\/b\u003e, a half-moon blade, a flush-cut blade and \u003cb\u003e12 sanding sheets\u003c\/b\u003e in four grits, from 60 to 120.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eComplete kit:\u003c\/b\u003e 6 types of accessory plus 12 sanding sheets in a single pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCuts, scrapes and sands:\u003c\/b\u003e covers every function of the multi-tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFour sanding grits:\u003c\/b\u003e 60, 80, 100 and 120, from roughing to finishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGuaranteed compatibility:\u003c\/b\u003e designed for the Aeropro NE-RP7636 multi-tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpares to hand:\u003c\/b\u003e avoids stopping a renovation because of a worn blade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFlush cuts in skirting boards, frames and mouldings.\u003c\/li\u003e\n\u003cli\u003eScraping joints, adhesives, silicone and paint residue.\u003c\/li\u003e\n\u003cli\u003eSanding corners and recesses where a sander will not fit.\u003c\/li\u003e\n\u003cli\u003eRenovation work, interior decoration and furniture restoration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with:\u003c\/b\u003e Aeropro NE-RP7636 pneumatic multi-tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDiamond polishing disc:\u003c\/b\u003e 1 pc, half-moon 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRigid scrapers:\u003c\/b\u003e 2 pcs, 2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTriangular sanding pad:\u003c\/b\u003e 1 pc, 3\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHalf-moon blade:\u003c\/b\u003e 1 pc, 3-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlush-cut blade:\u003c\/b\u003e 1 pc\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSanding sheets:\u003c\/b\u003e 12 pcs, grits 60 \/ 80 \/ 100 \/ 120\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e start with 60 or 80 grit for roughing and finish with 100 or 120 for fine sanding. Let the tool work without pressing: the oscillations do the job and the blade lasts much longer.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs it suitable for other multi-tools?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for the Aeropro NE-RP7636; for other brands, check first that the fitting matches.\u003c\/p\u003e\n\u003ch3\u003eWhich sanding grit should I use first?\u003c\/h3\u003e\n\u003cp\u003eStart with 60 or 80 for roughing and finish with 100 or 120 for fine sanding.\u003c\/p\u003e\n\u003ch3\u003eWhat does the kit include?\u003c\/h3\u003e\n\u003cp\u003eDiamond polishing disc, 2 rigid scrapers, triangular sanding pad, half-moon blade, flush-cut blade and 12 sanding sheets.\u003c\/p\u003e\n\u003ch3\u003eWhat is the flush-cut blade for?\u003c\/h3\u003e\n\u003cp\u003eFor cutting flush with the floor or wall, for example door frames or skirting boards, without damaging the surrounding surface.\u003c\/p\u003e\n\u003ch3\u003eHow many sanding sheets does it come with?\u003c\/h3\u003e\n\u003cp\u003e12 sanding sheets split between 60, 80, 100 and 120 grits.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is it suitable for other multi-tools?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is designed for the Aeropro NE-RP7636; for other brands, check first that the fitting matches.\"}},{\"@type\":\"Question\",\"name\":\"Which sanding grit should I use first?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Start with 60 or 80 for roughing and finish with 100 or 120 for fine sanding.\"}},{\"@type\":\"Question\",\"name\":\"What does the kit include?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Diamond polishing disc, 2 rigid scrapers, triangular sanding pad, half-moon blade, flush-cut blade and 12 sanding sheets.\"}},{\"@type\":\"Question\",\"name\":\"What is the flush-cut blade for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For cutting flush with the floor or wall, for example door frames or skirting boards, without damaging the surrounding surface.\"}},{\"@type\":\"Question\",\"name\":\"How many sanding sheets does it come with?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"12 sanding sheets split between 60, 80, 100 and 120 grits.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641417716059,"sku":"CEVIK-NE-RP7636-1","price":19.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/kit-accesorios-multiherramienta-oscilante-neumatica-vica-work-1.jpg?v=1793864801"},{"product_id":"atornillador-neumatico-recto","title":"High-speed straight pneumatic screwdriver","description":"\u003cp\u003e\u003cstrong\u003eDrive screws in series, quickly and without tiring your wrist.\u003c\/strong\u003e This straight compressed-air screwdriver from Aeropro is lightweight and high-speed, with a quick, simple bit change so you can move from one screw to the next without wasting time.\u003c\/p\u003e\u003cp\u003eIt is widely used in aluminium joinery (windows and doors), furniture assembly and vehicle repair and maintenance, where the same screwing operation is repeated dozens of times a day. With 11,000 rpm and an air consumption of 74 l\/min, it runs on a 2 HP compressor.\u003c\/p\u003e\u003cp\u003eIts straight, compact format lets you work in line with the screw and reach narrow areas, and being pneumatic it does not overheat or depend on batteries: as long as there is air, it keeps working.\u003c\/p\u003e\u003cp\u003eFor assembly workshops and aluminium joinery shops, it is a tool that soon pays for itself.\u003c\/p\u003e\u003ch2\u003eKey benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e11,000 rpm:\u003c\/strong\u003e fast screwdriving for series work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight and straight:\u003c\/strong\u003e comfortable and precise all day\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick bit change:\u003c\/strong\u003e move from one screw to another in seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e74 l\/min consumption:\u003c\/strong\u003e runs on a 2 HP compressor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePneumatic:\u003c\/strong\u003e no batteries, no overheating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it's for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAluminium joinery: windows and doors.\u003c\/li\u003e\n\u003cli\u003eFurniture assembly.\u003c\/li\u003e\n\u003cli\u003eVehicle repair and maintenance.\u003c\/li\u003e\n\u003cli\u003eWorkshop assembly lines.\u003c\/li\u003e\n\u003cli\u003eSeries assembly of parts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Aeropro\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 11,000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir consumption:\u003c\/strong\u003e 74 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended compressor:\u003c\/strong\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 19 x 7.5 x 5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference:\u003c\/strong\u003e RP7225\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVetonek tip:\u003c\/strong\u003e put a few drops of pneumatic tool oil in the air inlet every day you use it and work with dry air: a filter regulator with lubricator greatly extends the life of any pneumatic tool. Adjust the pressure so as not to strip the screws.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\u003cp\u003eA 2 HP compressor is recommended; the screwdriver consumes 74 l\/min.\u003c\/p\u003e\u003ch3\u003eWhat air inlet does it have?\u003c\/h3\u003e\u003cp\u003eA 1\/4\" air inlet.\u003c\/p\u003e\u003ch3\u003eWhat jobs is it ideal for?\u003c\/h3\u003e\u003cp\u003eFor aluminium joinery, furniture assembly and vehicle repair and maintenance.\u003c\/p\u003e\u003ch3\u003eWhat speed does it run at?\u003c\/h3\u003e\u003cp\u003e11,000 rpm.\u003c\/p\u003e\u003ch3\u003eHow do I maintain it?\u003c\/h3\u003e\u003cp\u003eWith a few drops of pneumatic tool oil in the air inlet every day you use it, and by working with dry, filtered air.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A 2 HP compressor is recommended; the screwdriver consumes 74 l\/min.\"}},{\"@type\":\"Question\",\"name\":\"What air inlet does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A 1\/4\\\" air inlet.\"}},{\"@type\":\"Question\",\"name\":\"What jobs is it ideal for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For aluminium joinery, furniture assembly and vehicle repair and maintenance.\"}},{\"@type\":\"Question\",\"name\":\"What speed does it run at?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"11,000 rpm.\"}},{\"@type\":\"Question\",\"name\":\"How do I maintain it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"With a few drops of pneumatic tool oil in the air inlet every day you use it, and by working with dry, filtered air.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641418043739,"sku":"CEVIK-NE-RP7225","price":24.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/atornillador-neumatico-recto-vica-work-1.jpg?v=1793864823"},{"product_id":"pistola-pintar-gravedad-600-cc","title":"Gravity-feed spray gun with 600 cc cup","description":"\u003cp\u003eWith the cup on top, the paint flows down to the nozzle by itself: \u003cb\u003eyou use every last drop\u003c\/b\u003e and get a \u003cb\u003every even fan pattern\u003c\/b\u003e with less pressure. This \u003cb\u003egravity-feed spray gun with 600 cc cup\u003c\/b\u003e is the classic choice for varnishing, lacquering and painting with a professional finish.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cb\u003esemi-professional version\u003c\/b\u003e (1.5 mm nozzle, 110 to 220 mm fan) for occasional jobs, or the \u003cb\u003eprofessional\u003c\/b\u003e version with steel and aluminium body, 160 to 225 mm fan and \u003cb\u003eair and material adjustment\u003c\/b\u003e, with a \u003cb\u003e1.4 mm\u003c\/b\u003e (varnishes and lacquers), \u003cb\u003e1.7 mm\u003c\/b\u003e (primers and enamels) or \u003cb\u003e2.0 mm\u003c\/b\u003e (thicker products) nozzle.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eGravity feed:\u003c\/b\u003e less pressure, less overspray and better use of paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e600 cc cup:\u003c\/b\u003e the ideal size for furniture, doors and parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFour versions:\u003c\/b\u003e semi-professional 1.5 mm or professional 1.4 \/ 1.7 \/ 2.0 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir and material adjustment:\u003c\/b\u003e on the professional version, to fine-tune the finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpares available:\u003c\/b\u003e nozzle and needle sets for the professional version.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVarnishing and lacquering furniture and joinery.\u003c\/li\u003e\n\u003cli\u003ePainting doors, windows and parts.\u003c\/li\u003e\n\u003cli\u003ePrimers and enamels in body and paint work.\u003c\/li\u003e\n\u003cli\u003eRestoration and finishing work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e gravity, nylon top cup\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCapacity:\u003c\/b\u003e 600 cc\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNozzle:\u003c\/b\u003e 1.5 mm (semi-professional) · 1.4 \/ 1.7 \/ 2.0 mm (professional)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFan:\u003c\/b\u003e 110-220 mm (semi-professional) · 160-225 mm (professional)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking pressure:\u003c\/b\u003e 3-6 bar (professional)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfessional body:\u003c\/b\u003e steel and aluminium, air and material adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnection:\u003c\/b\u003e universal quick coupler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e always do a test pass on a piece of cardboard, keep the gun at a constant distance and clean it with solvent as soon as you finish: dried paint in the nozzle is the number one cause of a poor fan pattern.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich nozzle should I choose?\u003c\/h3\u003e\n\u003cp\u003e1.4 mm for varnishes and runny lacquers, 1.7 mm for general use and primers and 2.0 mm for thicker products.\u003c\/p\u003e\n\u003ch3\u003eAre there replacement nozzles?\u003c\/h3\u003e\n\u003cp\u003eYes, for the professional version there are 1.4 and 2.0 mm nozzle and needle sets.\u003c\/p\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eOne that maintains 3-6 bar with sufficient air flow; if you paint often, preferably with a tank of 50 litres or more.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the semi-professional and the professional version?\u003c\/h3\u003e\n\u003cp\u003eThe professional version has a steel and aluminium body, a wider fan (160-225 mm) and air and material adjustment; the semi-professional is simpler and more economical.\u003c\/p\u003e\n\u003ch3\u003eGravity or suction?\u003c\/h3\u003e\n\u003cp\u003eGravity makes better use of the paint and gives finer finishes; suction holds more product for large surfaces.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which nozzle should I choose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"1.4 mm for varnishes and runny lacquers, 1.7 mm for general use and primers and 2.0 mm for thicker products.\"}},{\"@type\":\"Question\",\"name\":\"Are there replacement nozzles?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, for the professional version there are 1.4 and 2.0 mm nozzle and needle sets.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"One that maintains 3-6 bar with sufficient air flow; if you paint often, preferably with a tank of 50 litres or more.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between the semi-professional and the professional version?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The professional version has a steel and aluminium body, a wider fan (160-225 mm) and air and material adjustment; the semi-professional is simpler and more economical.\"}},{\"@type\":\"Question\",\"name\":\"Gravity or suction?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Gravity makes better use of the paint and gives finer finishes; suction holds more product for large surfaces.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Semi-professional · 1.5 mm","offer_id":54641418731867,"sku":"CEVIK-CA-1852","price":21.56,"currency_code":"EUR","in_stock":true},{"title":"Professional · 1.4 mm","offer_id":54641418764635,"sku":"CEVIK-CA-1856\/3-1.4","price":38.22,"currency_code":"EUR","in_stock":true},{"title":"Professional · 1.7 mm","offer_id":54641418797403,"sku":"CEVIK-CA-1856\/3","price":38.22,"currency_code":"EUR","in_stock":true},{"title":"Professional · 2.0 mm","offer_id":54641418830171,"sku":"CEVIK-CA-1856\/3-2.0","price":38.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/pistola-pintar-gravedad-600-cc-vica-work-1.jpg?v=1793864852"},{"product_id":"pistola-gotele-gravedad-6-litros","title":"Gravity-feed texture spray gun with 6-litre hopper","description":"\u003cp\u003eApplying a textured finish with a roller or by hand is slow and the result never looks the same across the whole wall. With this \u003cb\u003egravity-feed texture spray gun\u003c\/b\u003e you spray the texture \u003cb\u003equickly and evenly\u003c\/b\u003e on walls and ceilings, and its \u003cb\u003e6-litre hopper\u003c\/b\u003e lets you cover a large area without stopping to refill.\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003ealuminium body\u003c\/b\u003e is lightweight, the \u003cb\u003eergonomic handle\u003c\/b\u003e reduces fatigue and it comes with \u003cb\u003ethree bronze nozzles\u003c\/b\u003e (4, 6 and 8 mm) with an \u003cb\u003eair regulator and shut-off valve\u003c\/b\u003e so you can decide the size of the texture: fine, medium or coarse.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6-litre hopper:\u003c\/b\u003e long working time on walls and ceilings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e3 bronze nozzles:\u003c\/b\u003e 4, 6 and 8 mm for fine, medium or coarse texture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir regulator with shut-off:\u003c\/b\u003e you control the spray on every pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAluminium body:\u003c\/b\u003e lightweight for overhead work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUniversal quick coupler:\u003c\/b\u003e compatible with standard workshop couplings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTextured finishes in homes, commercial premises and communal areas.\u003c\/li\u003e\n\u003cli\u003eTextures and rough finishes on walls and ceilings.\u003c\/li\u003e\n\u003cli\u003eRepairing damaged textured areas.\u003c\/li\u003e\n\u003cli\u003eRenovations and new builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e gravity\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHopper:\u003c\/b\u003e nylon, 6,000 cc\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNozzles:\u003c\/b\u003e 3 in bronze: 4, 6 and 8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBody:\u003c\/b\u003e aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e air regulator with shut-off valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnection:\u003c\/b\u003e universal quick coupler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e 4 mm nozzle for a fine texture, 8 mm for a coarse texture; and do not load the mix too thick or the gun will spit instead of spraying. Do a test on a piece of cardboard before you start and clean the gun with water as soon as you finish.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs it suitable for normal emulsion paint?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for textured finishes and texture products; for smooth paint a spray gun with a fine nozzle is better.\u003c\/p\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eA compressor with a tank of 50 litres or more to work without interruptions.\u003c\/p\u003e\n\u003ch3\u003eWhich nozzles are included?\u003c\/h3\u003e\n\u003cp\u003eThree bronze nozzles of 4, 6 and 8 mm.\u003c\/p\u003e\n\u003ch3\u003eHow do I change the size of the texture?\u003c\/h3\u003e\n\u003cp\u003eWith the nozzle (the smaller it is, the finer the texture), the air adjustment and the consistency of the mix.\u003c\/p\u003e\n\u003ch3\u003eAre there replacement nozzles?\u003c\/h3\u003e\n\u003cp\u003eYes, there is a set of 2A, 2B and 2C replacement nozzles for this gun.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is it suitable for normal emulsion paint?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is designed for textured finishes and texture products; for smooth paint a spray gun with a fine nozzle is better.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A compressor with a tank of 50 litres or more to work without interruptions.\"}},{\"@type\":\"Question\",\"name\":\"Which nozzles are included?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Three bronze nozzles of 4, 6 and 8 mm.\"}},{\"@type\":\"Question\",\"name\":\"How do I change the size of the texture?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"With the nozzle (the smaller it is, the finer the texture), the air adjustment and the consistency of the mix.\"}},{\"@type\":\"Question\",\"name\":\"Are there replacement nozzles?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, there is a set of 2A, 2B and 2C replacement nozzles for this gun.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641419551067,"sku":"CEVIK-CA-1805","price":28.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/pistola-gotele-gravedad-6-litros-vica-work-1.jpg?v=1793864875"},{"product_id":"pistola-pintar-succion-750-1000-cc","title":"Suction-feed spray gun with bottom cup","description":"\u003cp\u003eWhen you have a large area to paint, refilling the cup every few minutes breaks your rhythm. With the \u003cb\u003ecup underneath\u003c\/b\u003e, this \u003cb\u003esuction-feed spray gun\u003c\/b\u003e holds more paint and is \u003cb\u003every stable\u003c\/b\u003e for painting doors, furniture, machinery or structures in one go.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cb\u003e750 cc semi-professional version\u003c\/b\u003e with 1.5 mm nozzle and 110 to 220 mm fan, or the \u003cb\u003eprofessional version with aluminium body\u003c\/b\u003e with \u003cb\u003e1,000 cc\u003c\/b\u003e, 1.7 mm nozzle, 160 to 225 mm fan and \u003cb\u003eair adjustment\u003c\/b\u003e. Both with universal quick coupler.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eGreater capacity:\u003c\/b\u003e 750 or 1,000 cc for large surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVery stable:\u003c\/b\u003e the weight of the cup underneath balances the gun.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFan of up to 225 mm:\u003c\/b\u003e on the professional version, to cover more with each pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAluminium body:\u003c\/b\u003e on the professional version, light and tough.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpares available:\u003c\/b\u003e 1.4 and 2.0 mm nozzle and needle sets for the professional version.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePainting doors, furniture and cabinets.\u003c\/li\u003e\n\u003cli\u003eEnamels on machinery, structures and railings.\u003c\/li\u003e\n\u003cli\u003ePrimers in joinery and the workshop.\u003c\/li\u003e\n\u003cli\u003ePainting jobs on large surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e suction, bottom cup\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCapacity:\u003c\/b\u003e 750 cc (semi-professional) · 1,000 cc (professional)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNozzle:\u003c\/b\u003e 1.5 mm · 1.7 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFan:\u003c\/b\u003e 110-220 mm · 160-225 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfessional body:\u003c\/b\u003e aluminium, with air adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnection:\u003c\/b\u003e universal quick coupler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e with suction feed the paint needs to be slightly runnier than with gravity feed: thin it according to the manufacturer and strain it before filling the cup. Keep the gun perpendicular to the surface and overlap each pass by half of the previous one.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eSuction or gravity?\u003c\/h3\u003e\n\u003cp\u003eSuction holds more paint and is convenient for large surfaces; gravity makes better use of the product and gives finer finishes.\u003c\/p\u003e\n\u003ch3\u003eAre spares available?\u003c\/h3\u003e\n\u003cp\u003eFor the professional version there are 1.4 and 2.0 mm nozzle and needle sets.\u003c\/p\u003e\n\u003ch3\u003eWhat capacity does it have?\u003c\/h3\u003e\n\u003cp\u003e750 cc for the semi-professional version and 1,000 cc for the professional version.\u003c\/p\u003e\n\u003ch3\u003eDoes the paint need thinning?\u003c\/h3\u003e\n\u003cp\u003eYes, with suction feed the paint should be slightly runnier; follow the thinning ratio given by the product manufacturer.\u003c\/p\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eOne with sufficient air flow and a pressure regulator; if you paint often, with a tank of 50 litres or more.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Suction or gravity?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Suction holds more paint and is convenient for large surfaces; gravity makes better use of the product and gives finer finishes.\"}},{\"@type\":\"Question\",\"name\":\"Are spares available?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For the professional version there are 1.4 and 2.0 mm nozzle and needle sets.\"}},{\"@type\":\"Question\",\"name\":\"What capacity does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"750 cc for the semi-professional version and 1,000 cc for the professional version.\"}},{\"@type\":\"Question\",\"name\":\"Does the paint need thinning?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, with suction feed the paint should be slightly runnier; follow the thinning ratio given by the product manufacturer.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"One with sufficient air flow and a pressure regulator; if you paint often, with a tank of 50 litres or more.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Semi-professional · 750 cc · 1.5 mm","offer_id":54641420468571,"sku":"CEVIK-CA-1850","price":21.56,"currency_code":"EUR","in_stock":true},{"title":"Professional · 1,000 cc · 1.7 mm","offer_id":54641420501339,"sku":"CEVIK-CA-1855\/3L","price":38.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/pistola-pintar-succion-750-1000-cc-vica-work-1.jpg?v=1793864903"},{"product_id":"pistola-aerografica-retoques","title":"Touch-up spray gun with 125 cc cup","description":"\u003cp\u003eFor a touch-up you do not need to fill a 600 cc gun or waste paint. This \u003cb\u003etouch-up spray gun\u003c\/b\u003e is \u003cb\u003eultralight\u003c\/b\u003e and precise: ideal for small body repairs, frames, mouldings, small parts or blending, where detail matters most.\u003c\/p\u003e\n\u003cp\u003eIt has a \u003cb\u003e125 cc plastic top cup\u003c\/b\u003e, a \u003cb\u003e0.8 mm nozzle\u003c\/b\u003e and a \u003cb\u003estainless steel needle\u003c\/b\u003e, with \u003cb\u003epaint flow adjustment\u003c\/b\u003e to dispense exactly what you need. Its universal quick-coupler connection gets it ready in seconds on any workshop hose.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e0.8 mm nozzle:\u003c\/b\u003e fine atomisation for touch-ups and blending.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e125 cc cup:\u003c\/b\u003e you load just what you need and make the most of the paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUltralight:\u003c\/b\u003e total control in detail work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlow adjustment:\u003c\/b\u003e you adjust the amount of paint to each part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStainless steel needle:\u003c\/b\u003e resistant to solvents and easy to clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBody and paint touch-ups on vehicles.\u003c\/li\u003e\n\u003cli\u003ePainting frames, mouldings and small parts.\u003c\/li\u003e\n\u003cli\u003eBlending and decorative work.\u003c\/li\u003e\n\u003cli\u003eModelling, restoration and detail work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e gravity, top cup\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCapacity:\u003c\/b\u003e 125 cc\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCup material:\u003c\/b\u003e plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNozzle:\u003c\/b\u003e 0.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNeedle:\u003c\/b\u003e stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e paint flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnection:\u003c\/b\u003e universal with quick coupler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e work with low pressure and close to the part; for bodywork touch-ups, blend the edges with short passes and let each coat dry. When you finish, run clean solvent through so that the 0.8 mm nozzle does not clog.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan it be used to paint a whole door?\u003c\/h3\u003e\n\u003cp\u003eIt is not ideal: with 125 cc it is designed for touch-ups; for large surfaces use a gun of 600 cc or more.\u003c\/p\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eIt uses little air: almost any workshop compressor with a regulator will do.\u003c\/p\u003e\n\u003ch3\u003eWhat nozzle does it have?\u003c\/h3\u003e\n\u003cp\u003eA 0.8 mm nozzle, designed for fine atomisation and detail work.\u003c\/p\u003e\n\u003ch3\u003eHow is it connected?\u003c\/h3\u003e\n\u003cp\u003eWith a universal quick-coupler connection, the same as most workshop hoses use.\u003c\/p\u003e\n\u003ch3\u003eWhat products can I apply?\u003c\/h3\u003e\n\u003cp\u003ePaints, varnishes and lacquers that are runny or thinned according to the manufacturer; with a fine nozzle, thick products must be thinned.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Can it be used to paint a whole door?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is not ideal: with 125 cc it is designed for touch-ups; for large surfaces use a gun of 600 cc or more.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It uses little air: almost any workshop compressor with a regulator will do.\"}},{\"@type\":\"Question\",\"name\":\"What nozzle does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A 0.8 mm nozzle, designed for fine atomisation and detail work.\"}},{\"@type\":\"Question\",\"name\":\"How is it connected?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"With a universal quick-coupler connection, the same as most workshop hoses use.\"}},{\"@type\":\"Question\",\"name\":\"What products can I apply?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Paints, varnishes and lacquers that are runny or thinned according to the manufacturer; with a fine nozzle, thick products must be thinned.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641420861787,"sku":"CEVIK-CA-1851","price":24.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/pistola-aerografica-retoques-vica-work-1.jpg?v=1793864921"},{"product_id":"pistola-gravedad-decorativos-lisos-5-litros","title":"Professional gravity spray gun for smooth decorative finishes, 5 L cup","description":"\u003cp\u003eWhen you need to spray \u003cb\u003esmooth decorative products\u003c\/b\u003e on walls and ceilings, an ordinary spray gun falls short. This one has a \u003cb\u003e5-litre top cup\u003c\/b\u003e and a \u003cb\u003e2.2 mm nozzle\u003c\/b\u003e to cover large areas with an even finish.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDie-cast aluminium\u003c\/b\u003e body with a matt chrome finish, anodised aluminium regulators and \u003cb\u003estainless steel, Teflon and Viton\u003c\/b\u003e parts that stand up well to solvents. Its modular design can be taken apart for thorough cleaning.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e5-litre cup:\u003c\/b\u003e fewer stops to refill on large surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e2.2 mm nozzle:\u003c\/b\u003e for fairly dense products without clogging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSolvent-resistant:\u003c\/b\u003e Viton, Teflon, stainless steel and anodised aluminium.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial and air adjustment:\u003c\/b\u003e you adjust flow and atomisation to the product.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModular design:\u003c\/b\u003e removable parts for complete cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCleaning accessories included:\u003c\/b\u003e to keep it always in top condition.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApplying smooth decorative products on walls and ceilings.\u003c\/li\u003e\n\u003cli\u003eSpraying fairly dense paints and coatings on site.\u003c\/li\u003e\n\u003cli\u003ePainters and decorators working on large surfaces.\u003c\/li\u003e\n\u003cli\u003eInterior renovations of premises and homes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e gravity, top cup\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCapacity:\u003c\/b\u003e 5,000 cc\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNozzle:\u003c\/b\u003e 2.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir flow:\u003c\/b\u003e 275 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir inlet:\u003c\/b\u003e quick coupler\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterials:\u003c\/b\u003e matt chrome die-cast aluminium, anodised aluminium, stainless steel, Teflon and Viton\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eIncludes:\u003c\/b\u003e cleaning accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePacked weight:\u003c\/b\u003e 1.3 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackaging:\u003c\/b\u003e 25.5 x 29 x 25.5 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e with a consumption of 275 l\/min you need a compressor with good air flow and a tank: if the compressor cannot keep up, the pressure drops and the finish comes out uneven. And when you finish, empty the cup and run cleaner through the nozzle and needle before the product sets.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eOne that comfortably delivers 275 l\/min; the usual choice is a compressor of 3 HP or more with a 100-litre tank.\u003c\/p\u003e\n\u003ch3\u003eWhat nozzle size does it have?\u003c\/h3\u003e\n\u003cp\u003eIt has a 2.2 mm nozzle, designed for smooth decorative products.\u003c\/p\u003e\n\u003ch3\u003eIs it solvent-resistant?\u003c\/h3\u003e\n\u003cp\u003eYes, it has Viton seals and parts made of Teflon, stainless steel and anodised aluminium.\u003c\/p\u003e\n\u003ch3\u003eCan it be taken apart for cleaning?\u003c\/h3\u003e\n\u003cp\u003eYes, its modular design lets you remove the needle, nozzle and internal parts; cleaning accessories are included.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for normal paint?\u003c\/h3\u003e\n\u003cp\u003eIt can be used, but its strength lies in decorative and heavier-bodied products on large surfaces.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"One that comfortably delivers 275 l\/min; the usual choice is a compressor of 3 HP or more with a 100-litre tank.\"}},{\"@type\":\"Question\",\"name\":\"What nozzle size does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It has a 2.2 mm nozzle, designed for smooth decorative products.\"}},{\"@type\":\"Question\",\"name\":\"Is it solvent-resistant?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, it has Viton seals and parts made of Teflon, stainless steel and anodised aluminium.\"}},{\"@type\":\"Question\",\"name\":\"Can it be taken apart for cleaning?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, its modular design lets you remove the needle, nozzle and internal parts; cleaning accessories are included.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for normal paint?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It can be used, but its strength lies in decorative and heavier-bodied products on large surfaces.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641421910363,"sku":"CEVIK-CA-1807L","price":106.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/pistola-gravedad-decorativos-lisos-5-litros-vica-work-1.jpg?v=1793864954"},{"product_id":"pistola-soplado-neumatica","title":"Pneumatic blow gun for cleaning with compressed air","description":"\u003cp\u003eIt is the tool most used with a compressor, and the one that saves the most time: with a \u003cb\u003epneumatic blow gun\u003c\/b\u003e you clean away dust, swarf and liquids and \u003cb\u003edry parts in seconds\u003c\/b\u003e, without rags or brushes. All versions have a \u003cb\u003equick coupler\u003c\/b\u003e to connect them instantly.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cb\u003eshort nozzle\u003c\/b\u003e for general use, the \u003cb\u003eprofessional nylon\u003c\/b\u003e gun with a 10 cm curved nozzle (impact- and chemical-resistant), the \u003cb\u003e15 cm nozzle\u003c\/b\u003e to reach further or the \u003cb\u003e30, 50 or 80 cm long extension\u003c\/b\u003e versions with curved nozzle for engines, machinery and deep recesses.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSix versions:\u003c\/b\u003e from the short nozzle to the 80 cm extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfessional nylon:\u003c\/b\u003e resistant to impacts and chemicals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLong extensions with curved nozzle:\u003c\/b\u003e reach deep into engines and machinery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUp to 10 bar:\u003c\/b\u003e on the short nozzle, professional and 15 cm versions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQuick coupler:\u003c\/b\u003e instant tool changes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCleaning parts, workbenches and machinery.\u003c\/li\u003e\n\u003cli\u003eDrying parts after washing.\u003c\/li\u003e\n\u003cli\u003eBlowing away swarf on lathes, milling machines and in carpentry.\u003c\/li\u003e\n\u003cli\u003eCleaning engines, radiators and deep recesses.\u003c\/li\u003e\n\u003cli\u003eMaintenance of filters and equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 10 bar (short nozzle, professional and 15 cm) · 6 bar (80 cm extension)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfessional:\u003c\/b\u003e nylon, 10 cm curved nozzle, 1\/4\" inlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLong nozzle:\u003c\/b\u003e 15 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLong extension:\u003c\/b\u003e 30, 50 or 80 cm, curved nozzle, ergonomic handle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir flow, 80 cm extension:\u003c\/b\u003e 270 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnection:\u003c\/b\u003e quick coupler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e wear safety glasses when blowing and never point it at skin: compressed air can drive particles into eyes and wounds. When cleaning machinery, always blow dirt away from bearings and guides.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich one suits me best?\u003c\/h3\u003e\n\u003cp\u003eFor everyday use, the short nozzle or the professional version; for machines, engines or suspended ceilings, one with a long extension.\u003c\/p\u003e\n\u003ch3\u003eDo they work with any compressor?\u003c\/h3\u003e\n\u003cp\u003eYes, with a quick coupler to the compressor hose coupling.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure do they take?\u003c\/h3\u003e\n\u003cp\u003eUp to 10 bar for the short nozzle, professional and 15 cm versions; the 80 cm extension works at 6 bar.\u003c\/p\u003e\n\u003ch3\u003eHow much air does the long extension version use?\u003c\/h3\u003e\n\u003cp\u003eThe 80 cm extension version has an air flow of 270 l\/min.\u003c\/p\u003e\n\u003ch3\u003eIs blowing with compressed air dangerous?\u003c\/h3\u003e\n\u003cp\u003eYou must wear safety glasses and never point it at people or skin: projected particles can cause injuries.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which one suits me best?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For everyday use, the short nozzle or the professional version; for machines, engines or suspended ceilings, one with a long extension.\"}},{\"@type\":\"Question\",\"name\":\"Do they work with any compressor?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, with a quick coupler to the compressor hose coupling.\"}},{\"@type\":\"Question\",\"name\":\"What pressure do they take?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Up to 10 bar for the short nozzle, professional and 15 cm versions; the 80 cm extension works at 6 bar.\"}},{\"@type\":\"Question\",\"name\":\"How much air does the long extension version use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The 80 cm extension version has an air flow of 270 l\/min.\"}},{\"@type\":\"Question\",\"name\":\"Is blowing with compressed air dangerous?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"You must wear safety glasses and never point it at people or skin: projected particles can cause injuries.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Short nozzle","offer_id":54641423876443,"sku":"CEVIK-CA-1150","price":4.9,"currency_code":"EUR","in_stock":true},{"title":"Professional · 10 cm curved nozzle","offer_id":54641423909211,"sku":"CEVIK-CA-1151","price":6.86,"currency_code":"EUR","in_stock":true},{"title":"Long nozzle 15 cm","offer_id":54641423941979,"sku":"CEVIK-CA-1160","price":8.82,"currency_code":"EUR","in_stock":true},{"title":"30 cm extension · curved nozzle","offer_id":54641423974747,"sku":"CEVIK-CA-1161\/2","price":15.68,"currency_code":"EUR","in_stock":true},{"title":"50 cm extension · curved nozzle","offer_id":54641424007515,"sku":"CEVIK-CA-1161\/3","price":18.62,"currency_code":"EUR","in_stock":true},{"title":"80 cm extension · curved nozzle","offer_id":54641424040283,"sku":"CEVIK-CA-1161\/4","price":28.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/pistola-soplado-neumatica-vica-work-1.jpg?v=1793865012"},{"product_id":"pistola-petrolear-neumatica","title":"Pneumatic paraffin spray gun with 750 cc tank","description":"\u003cp\u003eCleaning an engine, an underbody or a greasy part with a brush is slow and messy. With this \u003cb\u003epneumatic paraffin spray gun\u003c\/b\u003e you spray \u003cb\u003ediesel, paraffin, degreasers or protective products\u003c\/b\u003e with compressed air and reach every corner in seconds, using less product.\u003c\/p\u003e\n\u003cp\u003eIts \u003cb\u003e750 cc tank\u003c\/b\u003e gives you enough capacity for complete maintenance jobs and the \u003cb\u003euniversal quick coupler\u003c\/b\u003e connects it to the compressor hose without tools. It takes up to \u003cb\u003e10 bar\u003c\/b\u003e of pressure.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEven spray:\u003c\/b\u003e the liquid reaches hard-to-access areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e750 cc tank:\u003c\/b\u003e enough to clean a complete engine or underbody.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSaves product:\u003c\/b\u003e you spray only what is needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUp to 10 bar:\u003c\/b\u003e works with any workshop compressor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUniversal quick coupler:\u003c\/b\u003e connects and disconnects instantly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDegreasing engines, parts and vehicle underbodies.\u003c\/li\u003e\n\u003cli\u003eApplying protective and anti-rust products during maintenance.\u003c\/li\u003e\n\u003cli\u003eCleaning agricultural and industrial machinery.\u003c\/li\u003e\n\u003cli\u003eSpraying thin liquids during workshop maintenance.\u003c\/li\u003e\n\u003cli\u003eCleaning chains, gears and mechanisms before greasing.\u003c\/li\u003e\n\u003cli\u003ePreparing dirty parts before repairing or painting them.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTank capacity:\u003c\/b\u003e 750 cc\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnection:\u003c\/b\u003e universal quick coupler\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower supply:\u003c\/b\u003e compressed air\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLiquids:\u003c\/b\u003e diesel, paraffin, degreasers and thin protective products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e do not use it with very aggressive solvents or near flames; when you finish, run a little clean diesel through so that no product is left in the nozzle. Wear safety glasses and nitrile gloves.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat liquids does it take?\u003c\/h3\u003e\n\u003cp\u003eThin cleaning and maintenance liquids such as diesel, paraffin or degreasers.\u003c\/p\u003e\n\u003ch3\u003eCan it be used for painting?\u003c\/h3\u003e\n\u003cp\u003eNo, use a spray gun for painting.\u003c\/p\u003e\n\u003ch3\u003eWhat capacity does it have?\u003c\/h3\u003e\n\u003cp\u003eThe tank holds 750 cc.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure does it need?\u003c\/h3\u003e\n\u003cp\u003eIt works at the usual pressure of a workshop compressor, with a maximum of 10 bar.\u003c\/p\u003e\n\u003ch3\u003eHow do I clean it?\u003c\/h3\u003e\n\u003cp\u003eEmpty the tank and spray clean diesel for a few seconds to flush any product residue out of the nozzle.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What liquids does it take?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Thin cleaning and maintenance liquids such as diesel, paraffin or degreasers.\"}},{\"@type\":\"Question\",\"name\":\"Can it be used for painting?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, use a spray gun for painting.\"}},{\"@type\":\"Question\",\"name\":\"What capacity does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The tank holds 750 cc.\"}},{\"@type\":\"Question\",\"name\":\"What pressure does it need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It works at the usual pressure of a workshop compressor, with a maximum of 10 bar.\"}},{\"@type\":\"Question\",\"name\":\"How do I clean it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Empty the tank and spray clean diesel for a few seconds to flush any product residue out of the nozzle.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641424793947,"sku":"CEVIK-CA-1400\/1","price":11.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/pistola-petrolear-neumatica-vica-work-1.jpg?v=1793865034"},{"product_id":"pistola-arenado-granallado-neumatica","title":"Sandblasting and shot blasting gun with suction hose","description":"\u003cp\u003eRust, old paint, limescale or chemical residue: some dirt cannot be removed properly with a brush or sandpaper. With this \u003cb\u003esandblasting and shot blasting gun\u003c\/b\u003e you remove it with a jet of sand or grit and leave the surface \u003cb\u003eclean and keyed\u003c\/b\u003e, ready for painting or treatment.\u003c\/p\u003e\n\u003cp\u003eIts \u003cb\u003ecast aluminium body\u003c\/b\u003e is tough and lightweight, and the \u003cb\u003e1 m rubber hose\u003c\/b\u003e draws the abrasive straight from the bag or container, with no hoppers or tanks. It includes \u003cb\u003etwo interchangeable nozzles\u003c\/b\u003e to adjust the jet to each job and works at up to \u003cb\u003e10 bar\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSuction system:\u003c\/b\u003e draws the abrasive straight from the bag or container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCast aluminium body:\u003c\/b\u003e wear-resistant and lightweight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e2 interchangeable nozzles:\u003c\/b\u003e more concentrated or wider jet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUp to 10 bar:\u003c\/b\u003e cleaning power for metal and stone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQuick coupler:\u003c\/b\u003e connects to the compressor hose instantly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving rust from iron, sheet metal and metal parts.\u003c\/li\u003e\n\u003cli\u003eStripping old paint from gates, parts and machinery.\u003c\/li\u003e\n\u003cli\u003eCleaning stone, limescale and chemical residue.\u003c\/li\u003e\n\u003cli\u003eRestoring vehicle, motorbike and tool parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBody:\u003c\/b\u003e cast aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSuction hose:\u003c\/b\u003e rubber, 1 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNozzles:\u003c\/b\u003e 2 interchangeable\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConnection:\u003c\/b\u003e quick coupler\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAbrasive:\u003c\/b\u003e dry sand or grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e use dry, well-sieved abrasive and fit a water filter in the line: with moisture, the sand clumps and the gun clogs. A face shield or mask, gloves and respiratory protection are essential, and work in a ventilated space.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eSandblasting uses a lot of air: the more air flow and the bigger the tank, the more continuous the jet will be.\u003c\/p\u003e\n\u003ch3\u003eWhat abrasive should I use?\u003c\/h3\u003e\n\u003cp\u003eDry, fine sand or grit suitable for blasting.\u003c\/p\u003e\n\u003ch3\u003eHow does it load the abrasive?\u003c\/h3\u003e\n\u003cp\u003eBy suction: put the 1 m hose into the bag or container and the gun draws in the abrasive when you pull the trigger.\u003c\/p\u003e\n\u003ch3\u003eWhat is the maximum pressure it takes?\u003c\/h3\u003e\n\u003cp\u003eUp to 10 bar.\u003c\/p\u003e\n\u003ch3\u003eWhat protection do I need?\u003c\/h3\u003e\n\u003cp\u003eA mask or face shield, respiratory protection, gloves and clothing that covers the skin: the abrasive rebounds with force.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Sandblasting uses a lot of air: the more air flow and the bigger the tank, the more continuous the jet will be.\"}},{\"@type\":\"Question\",\"name\":\"What abrasive should I use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Dry, fine sand or grit suitable for blasting.\"}},{\"@type\":\"Question\",\"name\":\"How does it load the abrasive?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"By suction: put the 1 m hose into the bag or container and the gun draws in the abrasive when you pull the trigger.\"}},{\"@type\":\"Question\",\"name\":\"What is the maximum pressure it takes?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Up to 10 bar.\"}},{\"@type\":\"Question\",\"name\":\"What protection do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A mask or face shield, respiratory protection, gloves and clothing that covers the skin: the abrasive rebounds with force.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641425252699,"sku":"CEVIK-NE-KN8041","price":37.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/pistola-arenado-granallado-neumatica-vica-work-1.jpg?v=1793865053"},{"product_id":"taladro-neumatico-reversible-10-mm","title":"10 mm reversible pneumatic drill with keyless chuck","description":"\u003cp\u003eA drill that weighs little, does not overheat and has no cable to get tangled: that is what working with this \u003cb\u003e10 mm reversible pneumatic drill\u003c\/b\u003e is like. Weighing \u003cb\u003ejust 1.1 kg\u003c\/b\u003e and with a \u003cb\u003ekeyless chuck\u003c\/b\u003e, it drills metal, wood and plastic in the workshop all day long without tiring your hand.\u003c\/p\u003e\n\u003cp\u003eIts \u003cb\u003ecast aluminium body\u003c\/b\u003e resists knocks and corrosion, the rotation is \u003cb\u003ereversible\u003c\/b\u003e and it runs at \u003cb\u003e1,800 rpm\u003c\/b\u003e with a consumption of 106 l\/min. A 2-3 HP compressor is more than enough to power it.\u003c\/p\u003e\n\u003cp\u003eIt is a tool designed for daily use in the workshop: robust, lightweight and cordless. Connect it with a rubber hose with quick coupler, add an in-line lubricator and work with dry, filtered air so that the air motor keeps its performance for years. The keyless chuck lets you change drill bits with one hand.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eJust 1.1 kg:\u003c\/b\u003e easy to handle in repetitive jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10 mm keyless chuck:\u003c\/b\u003e change drill bits without a key.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReversible rotation:\u003c\/b\u003e frees jammed drill bits easily.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCast aluminium:\u003c\/b\u003e resistant to knocks and corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLow consumption:\u003c\/b\u003e 106 l\/min, suitable for 2-3 HP compressors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrilling metal, wood and plastic in the workshop.\u003c\/li\u003e\n\u003cli\u003eIndustrial and machinery maintenance.\u003c\/li\u003e\n\u003cli\u003eSeries assembly.\u003c\/li\u003e\n\u003cli\u003eBodywork and light metal fabrication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eChuck:\u003c\/b\u003e keyless, 10 mm (3\/8\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 1,800 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRotation:\u003c\/b\u003e reversible\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir consumption:\u003c\/b\u003e 106 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 10 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir inlet:\u003c\/b\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBody:\u003c\/b\u003e cast aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e 1.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e lubricate the tool with a few drops of pneumatic oil before each working day and drain the water from the tank: you will greatly extend the life of the motor.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eOne that comfortably delivers 106 l\/min; a 2-3 HP compressor is more than enough.\u003c\/p\u003e\n\u003ch3\u003eDo I need a key to change the drill bit?\u003c\/h3\u003e\n\u003cp\u003eNo, the chuck is keyless.\u003c\/p\u003e\n\u003ch3\u003eHow much does it weigh?\u003c\/h3\u003e\n\u003cp\u003e1.1 kg.\u003c\/p\u003e\n\u003ch3\u003eWhat materials can it drill?\u003c\/h3\u003e\n\u003cp\u003eMetal, wood and plastic, with drill bits up to 10 mm.\u003c\/p\u003e\n\u003ch3\u003eWhat is the maximum pressure it takes?\u003c\/h3\u003e\n\u003cp\u003eUp to 10 bar; it normally works at the regulated pressure of the workshop line.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"One that comfortably delivers 106 l\/min; a 2-3 HP compressor is more than enough.\"}},{\"@type\":\"Question\",\"name\":\"Do I need a key to change the drill bit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, the chuck is keyless.\"}},{\"@type\":\"Question\",\"name\":\"How much does it weigh?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"1.1 kg.\"}},{\"@type\":\"Question\",\"name\":\"What materials can it drill?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Metal, wood and plastic, with drill bits up to 10 mm.\"}},{\"@type\":\"Question\",\"name\":\"What is the maximum pressure it takes?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Up to 10 bar; it normally works at the regulated pressure of the workshop line.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641427841371,"sku":"CEVIK-NE-KN10BLIS","price":47.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/taladro-neumatico-reversible-10-mm-vica-work-1.jpg?v=1793865131"},{"product_id":"taladro-neumatico-recto-10-mm","title":"10 mm reversible straight pneumatic drill","description":"\u003cp\u003eSome holes cannot be drilled with a pistol-grip drill: inside a recess, between two sheets, inside an engine. This \u003cb\u003e10 mm reversible straight pneumatic drill\u003c\/b\u003e from \u003cb\u003eAeropro\u003c\/b\u003e has an \u003cb\u003ein-line, light and slim\u003c\/b\u003e design, made precisely for working in hard-to-reach areas.\u003c\/p\u003e\n\u003cp\u003eIt has a \u003cb\u003e10 mm keyless chuck\u003c\/b\u003e, \u003cb\u003ereversible\u003c\/b\u003e rotation and \u003cb\u003eP6 industrial bearings\u003c\/b\u003e for a long service life. It runs at \u003cb\u003e2,300 rpm\u003c\/b\u003e, uses 114 l\/min and a \u003cb\u003e2 HP\u003c\/b\u003e compressor is enough to work with it.\u003c\/p\u003e\n\u003cp\u003eIt is the perfect complement to a pistol-grip drill: the pistol-grip model for everyday drilling and the straight one for places no other tool can reach. Connect it with a quick coupler and an in-line lubricator and it will be ready for years of work.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eStraight design:\u003c\/b\u003e fits into recesses and narrow spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eKeyless chuck:\u003c\/b\u003e change drill bits without a key.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReversible:\u003c\/b\u003e for freeing jammed drill bits and driving or removing screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eP6 industrial bearings:\u003c\/b\u003e longer life under intensive use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e2 HP compressor:\u003c\/b\u003e low air consumption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrilling in car bodies and internal recesses.\u003c\/li\u003e\n\u003cli\u003eMachinery and engine maintenance.\u003c\/li\u003e\n\u003cli\u003eAssembly work in confined spaces.\u003c\/li\u003e\n\u003cli\u003eDrilling sheet metal, aluminium and plastic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Aeropro\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eChuck:\u003c\/b\u003e keyless, 10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 2,300 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRotation:\u003c\/b\u003e reversible\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir consumption:\u003c\/b\u003e 114 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir inlet:\u003c\/b\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended compressor:\u003c\/b\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e P6 industrial\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackaging:\u003c\/b\u003e 22 x 7 x 5 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e the straight design is perfect for drilling inside recesses and car bodies; hold it with both hands so that the drill bit does not wander. Lubricate with pneumatic oil at the start of the working day.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eA 2 HP compressor is enough.\u003c\/p\u003e\n\u003ch3\u003eIs it reversible?\u003c\/h3\u003e\n\u003cp\u003eYes, it can rotate in both directions.\u003c\/p\u003e\n\u003ch3\u003eWhat speed does it run at?\u003c\/h3\u003e\n\u003cp\u003eAt 2,300 rpm.\u003c\/p\u003e\n\u003ch3\u003eDoes it need a key to change the drill bit?\u003c\/h3\u003e\n\u003cp\u003eNo, the chuck is keyless.\u003c\/p\u003e\n\u003ch3\u003eWhat is the advantage of the straight design?\u003c\/h3\u003e\n\u003cp\u003eIt is slim and elongated, so it fits into recesses and areas where a pistol-grip drill will not fit.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A 2 HP compressor is enough.\"}},{\"@type\":\"Question\",\"name\":\"Is it reversible?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, it can rotate in both directions.\"}},{\"@type\":\"Question\",\"name\":\"What speed does it run at?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"At 2,300 rpm.\"}},{\"@type\":\"Question\",\"name\":\"Does it need a key to change the drill bit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, the chuck is keyless.\"}},{\"@type\":\"Question\",\"name\":\"What is the advantage of the straight design?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is slim and elongated, so it fits into recesses and areas where a pistol-grip drill will not fit.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641428332891,"sku":"CEVIK-NE-RP17113","price":28.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/taladro-neumatico-recto-10-mm-vica-work-1.jpg?v=1793865148"},{"product_id":"taladro-neumatico-reversible-13-mm","title":"13 mm reversible pneumatic drill with keyless chuck","description":"\u003cp\u003eCompressed air drill from \u003cb\u003eAeropro\u003c\/b\u003e with a \u003cb\u003e13 mm keyless chuck\u003c\/b\u003e, for large drill bits and \u003cb\u003emaintenance\u003c\/b\u003e work in workshops and industry.\u003c\/p\u003e\n\u003cp\u003eIt runs at \u003cb\u003e700 rpm\u003c\/b\u003e, a low speed designed for large-diameter drill bits and for drilling metal with control. It is \u003cb\u003ereversible\u003c\/b\u003e, very light for prolonged use and has \u003cb\u003eP6 industrial bearings\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e13 mm chuck:\u003c\/b\u003e takes larger drill bits than a 10 mm drill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eKeyless:\u003c\/b\u003e you change drill bits without a key.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReversible:\u003c\/b\u003e for freeing jammed drill bits or loosening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLow speed:\u003c\/b\u003e 700 rpm, ideal for large diameters and metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eP6 bearings:\u003c\/b\u003e long service life in professional use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLightweight:\u003c\/b\u003e less fatigue during long jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMechanical and industrial maintenance workshops.\u003c\/li\u003e\n\u003cli\u003eLocksmithing and light metal fabrication.\u003c\/li\u003e\n\u003cli\u003eDrilling large diameters in metal and wood.\u003c\/li\u003e\n\u003cli\u003eAssembly and repair work in hard-to-reach areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eChuck:\u003c\/b\u003e keyless, 13 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 700 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRotation:\u003c\/b\u003e reversible\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir consumption:\u003c\/b\u003e 114 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir inlet:\u003c\/b\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended compressor:\u003c\/b\u003e 2 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBearings:\u003c\/b\u003e P6 industrial\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePacked weight:\u003c\/b\u003e 1.19 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackaging:\u003c\/b\u003e 22 x 15 x 5 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e with large drill bits, first mark with a centre punch and drill a 4-6 mm pilot hole: the 13 mm drill bit will go in centred without straining the motor.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch3\u003e🔧 How to get the most out of it\u003c\/h3\u003e\n\u003cp\u003eIts low speed is an advantage for large drill bits and for drilling metal with control: do not force the tool, let the torque do the work. Connect it with a hose of sufficient bore and a quick coupler, fit an in-line lubricator and drain the compressor tank when you finish so that no water reaches the air motor.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eA 2 HP compressor that delivers at least 114 l\/min.\u003c\/p\u003e\n\u003ch3\u003eWhy does it have such a low speed?\u003c\/h3\u003e\n\u003cp\u003eBecause it is designed for large drill bits and metal, where more torque and less speed are needed.\u003c\/p\u003e\n\u003ch3\u003eIs it reversible?\u003c\/h3\u003e\n\u003cp\u003eYes.\u003c\/p\u003e\n\u003ch3\u003eDoes the chuck need a key?\u003c\/h3\u003e\n\u003cp\u003eNo, it is keyless.\u003c\/p\u003e\n\u003ch3\u003eHow do I maintain it?\u003c\/h3\u003e\n\u003cp\u003eA few drops of pneumatic oil in the air inlet before use, and clean, dry air.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A 2 HP compressor that delivers at least 114 l\/min.\"}},{\"@type\":\"Question\",\"name\":\"Why does it have such a low speed?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Because it is designed for large drill bits and metal, where more torque and less speed are needed.\"}},{\"@type\":\"Question\",\"name\":\"Is it reversible?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes.\"}},{\"@type\":\"Question\",\"name\":\"Does the chuck need a key?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, it is keyless.\"}},{\"@type\":\"Question\",\"name\":\"How do I maintain it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A few drops of pneumatic oil in the air inlet before use, and clean, dry air.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641429217627,"sku":"CEVIK-NE-RP17108","price":76.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/taladro-neumatico-reversible-13-mm-vica-work-1.jpg?v=1793865180"},{"product_id":"llave-impacto-neumatica-1-2","title":"1\/2\" pneumatic impact wrench with twin hammer","description":"\u003cp\u003eThe key tool in any tyre workshop: this \u003cb\u003eAeropro 1\/2\" impact wrench\u003c\/b\u003e loosens and tightens wheel and suspension nuts in seconds thanks to its \u003cb\u003e610 Nm of torque\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eIts \u003cb\u003etwin hammer\u003c\/b\u003e mechanism delivers more power with less vibration and greater durability. Lightweight \u003cb\u003ecomposite\u003c\/b\u003e body, rubberised grip, easy-to-use trigger and \u003cb\u003erear exhaust\u003c\/b\u003e that does not blow in your face or raise dust.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e610 Nm of torque:\u003c\/b\u003e enough for wheel nuts and heavy-duty jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwin hammer:\u003c\/b\u003e more power, less vibration and longer life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eComposite body:\u003c\/b\u003e light and tough.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRubberised grip:\u003c\/b\u003e firm, comfortable hold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRear exhaust:\u003c\/b\u003e keeps the work area clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTyre and fast-fit workshops.\u003c\/li\u003e\n\u003cli\u003eSuspensions, brakes and front axles.\u003c\/li\u003e\n\u003cli\u003eMaintenance of agricultural machinery and fleets.\u003c\/li\u003e\n\u003cli\u003eAssembly and disassembly of bolted structures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSquare drive:\u003c\/b\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum torque:\u003c\/b\u003e 610 Nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpeed:\u003c\/b\u003e 7,500 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMechanism:\u003c\/b\u003e twin hammer\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir consumption:\u003c\/b\u003e 183.9 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir inlet:\u003c\/b\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRecommended compressor:\u003c\/b\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBody:\u003c\/b\u003e composite, rubberised grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eExhaust:\u003c\/b\u003e rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePacked weight:\u003c\/b\u003e 2.1 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackaging:\u003c\/b\u003e 30 x 28 x 12 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e always use \u003cb\u003eimpact sockets\u003c\/b\u003e (black, chrome molybdenum steel), never chrome-plated hand sockets, which can shatter. And when tightening wheels, do the final tightening with a torque wrench.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch3\u003e🔧 How to get the most out of it\u003c\/h3\u003e\n\u003cp\u003eAlways use impact sockets and a hose with a quick coupler of good bore so that the full air flow gets through. Drain the water from the tank daily and put a few drops of pneumatic oil into the inlet before you start.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eA 3 HP compressor with good air flow; the wrench uses about 184 l\/min.\u003c\/p\u003e\n\u003ch3\u003eCan I tighten my car wheels with it?\u003c\/h3\u003e\n\u003cp\u003eYes, to run the nuts in, but the final tightening must be done with a torque wrench to the manufacturer's torque.\u003c\/p\u003e\n\u003ch3\u003eWhat sockets does it use?\u003c\/h3\u003e\n\u003cp\u003e1\/2\" impact sockets. We have a set of 10 sockets from 11 to 24 mm.\u003c\/p\u003e\n\u003ch3\u003eWhat hose should I use?\u003c\/h3\u003e\n\u003cp\u003eA hose with an inside diameter of at least 8 mm so as not to lose air flow.\u003c\/p\u003e\n\u003ch3\u003eHow is it maintained?\u003c\/h3\u003e\n\u003cp\u003eA few drops of pneumatic oil in the inlet before each use, and dry air.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A 3 HP compressor with good air flow; the wrench uses about 184 l\/min.\"}},{\"@type\":\"Question\",\"name\":\"Can I tighten my car wheels with it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, to run the nuts in, but the final tightening must be done with a torque wrench to the manufacturer's torque.\"}},{\"@type\":\"Question\",\"name\":\"What sockets does it use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"1\/2\\\" impact sockets. We have a set of 10 sockets from 11 to 24 mm.\"}},{\"@type\":\"Question\",\"name\":\"What hose should I use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A hose with an inside diameter of at least 8 mm so as not to lose air flow.\"}},{\"@type\":\"Question\",\"name\":\"How is it maintained?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A few drops of pneumatic oil in the inlet before each use, and dry air.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641429741915,"sku":"CEVIK-NE-RP17407","price":71.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/llave-impacto-neumatica-1-2-vica-work-1.jpg?v=1793865212"},{"product_id":"remachadora-neumatica","title":"Pneumatic riveter for rivets up to 4.8 mm with carry case","description":"\u003cp\u003eIf you fit rivets every day, a hand riveter will wear out your wrist. This \u003cb\u003epneumatic riveter\u003c\/b\u003e does the work at the pull of the trigger, with a \u003cb\u003epulling force of 7,063 N\u003c\/b\u003e for rivets up to \u003cb\u003e4.8 mm\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eDesigned for \u003cb\u003eindustrial use and frequent riveting\u003c\/b\u003e: car bodies, sheet metal, ducting, signs or metal joinery. Supplied in a \u003cb\u003ecarry case\u003c\/b\u003e for transporting it and storing it safely.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEffortless:\u003c\/b\u003e the air does the pulling, you just aim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e7,063 N pulling force:\u003c\/b\u003e rivets up to 4.8 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProduction pace:\u003c\/b\u003e ideal for series and repetitive work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarry case:\u003c\/b\u003e everything organised and protected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDual air inlet:\u003c\/b\u003e 3\/8\" and 1\/4\".\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSheet metal and bodyshops.\u003c\/li\u003e\n\u003cli\u003eManufacture of ducting, electrical panels and signs.\u003c\/li\u003e\n\u003cli\u003eMetal and aluminium joinery.\u003c\/li\u003e\n\u003cli\u003eIndustrial assembly and maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum rivet:\u003c\/b\u003e 4.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePulling force:\u003c\/b\u003e 7,063 N\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 6.3 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir inlet:\u003c\/b\u003e 3\/8\" and 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e grey \/ silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePresentation:\u003c\/b\u003e carry case\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePacked weight:\u003c\/b\u003e 2.54 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackaging:\u003c\/b\u003e 9.5 x 31.5 x 21.5 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e empty the mandrel container before it fills up and do not exceed 6.3 bar: more pressure does not rivet better and it punishes the seals.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch3\u003e🔧 How to get the most out of it\u003c\/h3\u003e\n\u003cp\u003eUse rivets up to 4.8 mm in diameter and empty the mandrel collector frequently so that the pulling mechanism does not jam. Work with a regulator that does not exceed the maximum pressure of 6.3 bar, connect the riveter with a quick coupler and add a few drops of pneumatic oil into the air inlet at the start of each working day. Store it in its carry case, clean and free of mandrels, so that it is always protected and easy to find.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat rivets does it take?\u003c\/h3\u003e\n\u003cp\u003eRivets up to 4.8 mm in diameter.\u003c\/p\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eAny workshop compressor with a regulator that maintains up to 6.3 bar.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with a carry case?\u003c\/h3\u003e\n\u003cp\u003eYes, it is supplied in a carry case.\u003c\/p\u003e\n\u003ch3\u003eIs it for professional use?\u003c\/h3\u003e\n\u003cp\u003eYes, it is designed for industrial use and frequent riveting.\u003c\/p\u003e\n\u003ch3\u003eHow is it maintained?\u003c\/h3\u003e\n\u003cp\u003eLubrication with pneumatic oil, dry air and regular cleaning of the jaws.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What rivets does it take?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Rivets up to 4.8 mm in diameter.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Any workshop compressor with a regulator that maintains up to 6.3 bar.\"}},{\"@type\":\"Question\",\"name\":\"Does it come with a carry case?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, it is supplied in a carry case.\"}},{\"@type\":\"Question\",\"name\":\"Is it for professional use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, it is designed for industrial use and frequent riveting.\"}},{\"@type\":\"Question\",\"name\":\"How is it maintained?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Lubrication with pneumatic oil, dry air and regular cleaning of the jaws.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641430593883,"sku":"CEVIK-NE-KN6615K","price":123.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/remachadora-neumatica-vica-work-1.jpg?v=1793865238"},{"product_id":"plato-goma-150-mm-lijadora-neumatica","title":"150 mm rubber backing pad for air sander","description":"\u003cp\u003eWhen the sander pad warps or the hook-and-loop stops gripping, the sanding disc wobbles, comes loose and leaves marks. This \u003cb\u003e150 mm rubber backing pad\u003c\/b\u003e gives your random orbital sander back a \u003cb\u003efirm, well-cushioned support\u003c\/b\u003e, with a good grip on the sanding disc, so it sands like new again.\u003c\/p\u003e\n\u003cp\u003eIt is the replacement pad for \u003cb\u003e150 mm\u003c\/b\u003e random orbital sanders, such as the \u003cb\u003eCP31-400 and CP31-401\u003c\/b\u003e models. Made of \u003cb\u003etough rubber\u003c\/b\u003e, it is suitable for woodworking, metal and car restoration. Replacing it costs much less than a new sander.\u003c\/p\u003e\n\u003cp\u003eBefore fitting it, clean the sander spindle and check that the pad is properly centred and tightened: an off-centre pad vibrates, tires your hand and wears out the bearings.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRevives your sander:\u003c\/b\u003e replaces a worn or warped pad in minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTough rubber:\u003c\/b\u003e good cushioning and long life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGood disc grip:\u003c\/b\u003e the sanding disc does not come loose or go off-centre.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e150 mm:\u003c\/b\u003e the standard diameter for workshop random orbital sanders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSavings:\u003c\/b\u003e extends the life of your sander without buying another.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing the pad on 150 mm random orbital sanders.\u003c\/li\u003e\n\u003cli\u003eSanding wood in carpentry and cabinetmaking.\u003c\/li\u003e\n\u003cli\u003ePreparing metal and car bodies before painting.\u003c\/li\u003e\n\u003cli\u003eCar and furniture restoration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter:\u003c\/b\u003e 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e tough rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible with:\u003c\/b\u003e 150 mm random orbital sanders, models CP31-400 \/ CP31-401\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUse:\u003c\/b\u003e woodworking, metal and car restoration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e use sanding discs of the same diameter and well centred; clean it with a damp cloth and avoid aggressive solvents. Do not rest the running sander on the bare pad: the hook-and-loop wears out in seconds.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eIs it suitable for my sander?\u003c\/h3\u003e\n\u003cp\u003eIt is if your sander is 150 mm and the fitting matches the CP31-400 \/ CP31-401 models; contact us if in doubt.\u003c\/p\u003e\n\u003ch3\u003eWhen should I replace it?\u003c\/h3\u003e\n\u003cp\u003eWhen the disc no longer grips well or the rubber is warped.\u003c\/p\u003e\n\u003ch3\u003eWhat diameter is it?\u003c\/h3\u003e\n\u003cp\u003e150 mm.\u003c\/p\u003e\n\u003ch3\u003eWhat material is it made of?\u003c\/h3\u003e\n\u003cp\u003eTough rubber, with good cushioning and sanding disc grip.\u003c\/p\u003e\n\u003ch3\u003eHow do I maintain it?\u003c\/h3\u003e\n\u003cp\u003eClean it with a damp cloth, avoid aggressive solvents and do not run it without a sanding disc.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is it suitable for my sander?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is if your sander is 150 mm and the fitting matches the CP31-400 \/ CP31-401 models; contact us if in doubt.\"}},{\"@type\":\"Question\",\"name\":\"When should I replace it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"When the disc no longer grips well or the rubber is warped.\"}},{\"@type\":\"Question\",\"name\":\"What diameter is it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"150 mm.\"}},{\"@type\":\"Question\",\"name\":\"What material is it made of?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Tough rubber, with good cushioning and sanding disc grip.\"}},{\"@type\":\"Question\",\"name\":\"How do I maintain it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Clean it with a damp cloth, avoid aggressive solvents and do not run it without a sanding disc.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641431609691,"sku":"CEVIK-NE-RP7336S-1BIS","price":34.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/plato-goma-150-mm-lijadora-neumatica-vica-work-1.jpg?v=1793865288"},{"product_id":"juego-10-vasos-impacto-1-2","title":"Set of 10 1\/2\" impact sockets from 11 to 24 mm","description":"\u003cp\u003eA standard socket is not made for the blows of an impact wrench: it cracks, rounds off or shatters. This \u003cb\u003eset of 10 1\/2\" impact sockets\u003c\/b\u003e from \u003cb\u003eAeropro\u003c\/b\u003e is designed precisely for that, to withstand the hammering of pneumatic impact guns day after day in the workshop.\u003c\/p\u003e\n\u003cp\u003eIt brings together the \u003cb\u003eten most used sizes\u003c\/b\u003e, from 11 to 24 mm, including the \u003cb\u003e17, 19, 21 and 22 mm\u003c\/b\u003e sizes you will find on most wheel nuts. With a single set you cover tyre changes, suspension fixings and general dismantling of parts.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eImpact-specific:\u003c\/b\u003e designed for working with pneumatic impact wrenches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e10 sizes in one set:\u003c\/b\u003e 11, 12, 13, 14, 16, 17, 19, 21, 22 and 24 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWheel sizes included:\u003c\/b\u003e 17, 19, 21 and 22 mm, the most common on cars and vans.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1\/2\" square drive:\u003c\/b\u003e the standard for workshop impact wrenches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAeropro brand:\u003c\/b\u003e workshop accessory designed for daily professional use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChanging wheels in tyre and mechanical workshops.\u003c\/li\u003e\n\u003cli\u003eRemoving suspension, brake and engine fixings.\u003c\/li\u003e\n\u003cli\u003eAssembly and maintenance of agricultural and industrial machinery.\u003c\/li\u003e\n\u003cli\u003eMetal fabrication work and bolted structures.\u003c\/li\u003e\n\u003cli\u003eA complement to any 1\/2\" impact wrench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Aeropro\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSquare drive:\u003c\/b\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNumber of sockets:\u003c\/b\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSizes:\u003c\/b\u003e 11, 12, 13, 14, 16, 17, 19, 21, 22 and 24 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUse:\u003c\/b\u003e pneumatic impact wrenches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e use the impact wrench to loosen and run nuts in, and do the final tightening of the wheels with a torque wrench to the torque specified by the vehicle manufacturer. Check that the socket goes fully onto the nut before pulling the trigger so as not to round it off.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWill they fit my impact wrench?\u003c\/h3\u003e\n\u003cp\u003eYes, they fit any impact wrench with a 1\/2\" square drive.\u003c\/p\u003e\n\u003ch3\u003eDoes it include the wheel sizes?\u003c\/h3\u003e\n\u003cp\u003eYes, it includes 17, 19, 21 and 22 mm, the most common sizes for wheel nuts.\u003c\/p\u003e\n\u003ch3\u003eWhat sizes does the set include?\u003c\/h3\u003e\n\u003cp\u003e11, 12, 13, 14, 16, 17, 19, 21, 22 and 24 mm: ten sockets in total.\u003c\/p\u003e\n\u003ch3\u003eCan I use standard sockets on an impact wrench?\u003c\/h3\u003e\n\u003cp\u003eIt is not recommended: standard sockets are not designed for the blows of the impact mechanism and can break. Always use impact sockets like these.\u003c\/p\u003e\n\u003ch3\u003eCan they be used with a manual ratchet?\u003c\/h3\u003e\n\u003cp\u003eYes, the 1\/2\" square drive is the same, so you can also use them with a 1\/2\" ratchet or breaker bar.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Will they fit my impact wrench?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, they fit any impact wrench with a 1\/2\\\" square drive.\"}},{\"@type\":\"Question\",\"name\":\"Does it include the wheel sizes?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, it includes 17, 19, 21 and 22 mm, the most common sizes for wheel nuts.\"}},{\"@type\":\"Question\",\"name\":\"What sizes does the set include?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"11, 12, 13, 14, 16, 17, 19, 21, 22 and 24 mm: ten sockets in total.\"}},{\"@type\":\"Question\",\"name\":\"Can I use standard sockets on an impact wrench?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is not recommended: standard sockets are not designed for the blows of the impact mechanism and can break. Always use impact sockets like these.\"}},{\"@type\":\"Question\",\"name\":\"Can they be used with a manual ratchet?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, the 1\/2\\\" square drive is the same, so you can also use them with a 1\/2\\\" ratchet or breaker bar.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641432199515,"sku":"CEVIK-NE-RP7006","price":19.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/juego-10-vasos-impacto-1-2-vica-work-1.jpg?v=1793865304"},{"product_id":"grapadora-neumatica-chapa-corrugada","title":"Pneumatic corrugated fastener stapler for joining wood","description":"\u003cp\u003e\u003cb\u003eCorrugated fasteners\u003c\/b\u003e (wiggle nails) are the fastest way to join mitres and assemble \u003cb\u003elight timber structures\u003c\/b\u003e. This pneumatic stapler drives them in a single shot, leaving the joint flat and firm.\u003c\/p\u003e\n\u003cp\u003eIt takes fasteners \u003cb\u003e9 to 12 mm\u003c\/b\u003e high and \u003cb\u003e25.4 mm\u003c\/b\u003e wide and works between \u003cb\u003e4.5 and 8 bar\u003c\/b\u003e. Designed for \u003cb\u003eheavy-duty use\u003c\/b\u003e in carpentry, it is supplied in a carry case.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eFast joints:\u003c\/b\u003e one shot per joint, without glue or screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlat joint:\u003c\/b\u003e the fastener sits flush with the wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeavy-duty use:\u003c\/b\u003e robust build for professional carpentry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustable pressure:\u003c\/b\u003e from 4.5 to 8 bar depending on the wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarry case:\u003c\/b\u003e protected transport and storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAssembling light timber structures.\u003c\/li\u003e\n\u003cli\u003eFixing door casings and architraves.\u003c\/li\u003e\n\u003cli\u003eFrames, stretchers and boxes.\u003c\/li\u003e\n\u003cli\u003eCarpentry and furniture manufacture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eFastener type:\u003c\/b\u003e corrugated fastener\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFastener height:\u003c\/b\u003e 9-12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFastener width:\u003c\/b\u003e 25.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking pressure:\u003c\/b\u003e 4.5-8 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 8 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUse:\u003c\/b\u003e heavy-duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e matt black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePresentation:\u003c\/b\u003e carry case\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePacked weight:\u003c\/b\u003e 2.6 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackaging:\u003c\/b\u003e 30 x 8.7 x 27 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e rest the stapler nose firmly on the joint and keep the pieces clamped: the corrugated fastener pulls the two pieces of wood together and closes the joint, but only if they do not move when you fire.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch3\u003e🔧 How to get the most out of it\u003c\/h3\u003e\n\u003cp\u003eAlways work with the pressure within the 4.5 to 8 bar range and adjust it to the hardness of the wood: on softwoods lower it slightly so that the fastener does not sink in too far, and on hardwoods raise it without exceeding the maximum. Fit a filter regulator at the compressor outlet and a lubricator, or put a few drops of pneumatic oil into the air inlet at the start of the working day: the firing mechanism will work more smoothly and last many more cycles. Store it in its carry case, with no fasteners in the magazine, when not in use.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat fasteners does it use?\u003c\/h3\u003e\n\u003cp\u003eCorrugated fasteners 9 to 12 mm high and 25.4 mm wide.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure do I need?\u003c\/h3\u003e\n\u003cp\u003eBetween 4.5 and 8 bar depending on the hardness of the wood.\u003c\/p\u003e\n\u003ch3\u003eWhat is it used for?\u003c\/h3\u003e\n\u003cp\u003eFor assembling light timber structures and fixing door casings.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with a carry case?\u003c\/h3\u003e\n\u003cp\u003eYes.\u003c\/p\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eAny workshop compressor with a regulator that reaches 8 bar.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What fasteners does it use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Corrugated fasteners 9 to 12 mm high and 25.4 mm wide.\"}},{\"@type\":\"Question\",\"name\":\"What pressure do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Between 4.5 and 8 bar depending on the hardness of the wood.\"}},{\"@type\":\"Question\",\"name\":\"What is it used for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For assembling light timber structures and fixing door casings.\"}},{\"@type\":\"Question\",\"name\":\"Does it come with a carry case?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Any workshop compressor with a regulator that reaches 8 bar.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641432461659,"sku":"CEVIK-MCCF15PK","price":318.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/grapadora-neumatica-chapa-corrugada-vica-work-1.jpg?v=1793865330"},{"product_id":"grapadora-neumatica-tapicero-grapa-80","title":"Pneumatic upholstery stapler for type 80 staples","description":"\u003cp\u003eUpholstering by hand with a lever stapler tires your wrist and leaves staples half driven in. This \u003cb\u003epneumatic upholstery stapler\u003c\/b\u003e fires each staple with a simple touch of the trigger and leaves it \u003cb\u003eperfectly flush\u003c\/b\u003e in fabric, webbing or plywood, shot after shot and with no effort.\u003c\/p\u003e\n\u003cp\u003eIt works with \u003cb\u003etype 80 staples from 6 to 16 mm\u003c\/b\u003e, the most common in upholstery, and its magazine holds \u003cb\u003e120 staples\u003c\/b\u003e, so you can work your way around a whole seat or headboard without stopping to reload. Supplied in a \u003cb\u003eplastic carry case\u003c\/b\u003e to keep it protected in the workshop or take it on call-outs.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType 80 staples from 6 to 16 mm:\u003c\/b\u003e the standard upholstery format, easy to find in any hardware shop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e120-staple magazine:\u003c\/b\u003e fewer stops to reload and a steady working pace.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClean finish:\u003c\/b\u003e the staple goes in straight and flush, without damaging the fabric or leaving raised points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorks at 4 to 7 bar:\u003c\/b\u003e works with almost any workshop compressor with a regulator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarry case included:\u003c\/b\u003e the tool is protected and always easy to find on the bench or in the van.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUpholstering chairs, sofas, headboards and vehicle seats.\u003c\/li\u003e\n\u003cli\u003eFixing fabrics, canvas, foams and linings.\u003c\/li\u003e\n\u003cli\u003eFitting elastic webbing to frames.\u003c\/li\u003e\n\u003cli\u003eFixing thin plywood, furniture backs and panels.\u003c\/li\u003e\n\u003cli\u003eDecoration, stage set and display work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eStaple type:\u003c\/b\u003e type 80, from 6 to 16 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStaple width:\u003c\/b\u003e 12.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWire section:\u003c\/b\u003e 0.90 x 0.70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagazine capacity:\u003c\/b\u003e 120 staples\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking pressure:\u003c\/b\u003e 4-7 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePower supply:\u003c\/b\u003e compressed air\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePresentation:\u003c\/b\u003e plastic carry case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e adjust the pressure to the material: on thin fabrics lower the pressure so that the staple does not go right through, and on plywood raise it without exceeding 7 bar. Put a few drops of pneumatic oil into the air inlet at the start of the working day and always wear safety glasses.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat staples does it use?\u003c\/h3\u003e\n\u003cp\u003eType 80 staples from 6 to 16 mm long, 12.8 mm wide with 0.90 x 0.70 mm wire.\u003c\/p\u003e\n\u003ch3\u003eWhat is it for?\u003c\/h3\u003e\n\u003cp\u003eFor upholstering, fixing fabrics and foams, fitting elastic webbing and stapling thin plywood or furniture backs.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure does it need?\u003c\/h3\u003e\n\u003cp\u003eIt works between 4 and 7 bar. Adjust the pressure according to the material so that the staple sits flush.\u003c\/p\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eA stapler uses little air: a small workshop compressor with a pressure regulator and quick coupler is enough.\u003c\/p\u003e\n\u003ch3\u003eHow many staples does the magazine hold?\u003c\/h3\u003e\n\u003cp\u003eThe magazine holds 120 staples, enough to upholster a complete piece without reloading.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What staples does it use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Type 80 staples from 6 to 16 mm long, 12.8 mm wide with 0.90 x 0.70 mm wire.\"}},{\"@type\":\"Question\",\"name\":\"What is it for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For upholstering, fixing fabrics and foams, fitting elastic webbing and stapling thin plywood or furniture backs.\"}},{\"@type\":\"Question\",\"name\":\"What pressure does it need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It works between 4 and 7 bar. Adjust the pressure according to the material so that the staple sits flush.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A stapler uses little air: a small workshop compressor with a pressure regulator and quick coupler is enough.\"}},{\"@type\":\"Question\",\"name\":\"How many staples does the magazine hold?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The magazine holds 120 staples, enough to upholster a complete piece without reloading.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641432723803,"sku":"CEVIK-R80\/16","price":38.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/grapadora-neumatica-tapicero-grapa-80-vica-work-1.jpg?v=1793865348"},{"product_id":"clavadora-neumatica-clavo-t","title":"Pneumatic T-nail nailer for iron and steel nails","description":"\u003cp\u003eFor fast, powerful nailing on site, in formwork or in pallet and crate making, the \u003cb\u003eT-nail nailer\u003c\/b\u003e is the tool. It takes \u003cb\u003eiron and steel T-nails from 18 to 64 mm\u003c\/b\u003e long and \u003cb\u003e2.2 mm\u003c\/b\u003e thick.\u003c\/p\u003e\u003cp\u003eIt works between \u003cb\u003e4.5 and 8 bar\u003c\/b\u003e, is designed for \u003cb\u003eheavy-duty use\u003c\/b\u003e and comes in a plastic carry case.\u003c\/p\u003e\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eLong nails:\u003c\/b\u003e up to 64 mm for strong joints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e2.2 mm nails:\u003c\/b\u003e 14 gauge, for structural carpentry work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeavy-duty use:\u003c\/b\u003e robust build for site and factory.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustable pressure:\u003c\/b\u003e from 4.5 to 8 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarry case:\u003c\/b\u003e protected transport and storage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFormwork and site carpentry.\u003c\/li\u003e\n\u003cli\u003eMaking pallets, crates and packaging.\u003c\/li\u003e\n\u003cli\u003eTimber-frame houses and structures.\u003c\/li\u003e\n\u003cli\u003eInstalling parquet and floorboards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNail type:\u003c\/b\u003e iron \/ steel T-nail\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNail length:\u003c\/b\u003e 18-64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThickness:\u003c\/b\u003e 2.2 mm (14 gauge)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking pressure:\u003c\/b\u003e 4.5-8 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 8 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUse:\u003c\/b\u003e heavy-duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e matt black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePresentation:\u003c\/b\u003e carry case\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePacked weight:\u003c\/b\u003e 3.8 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackaging:\u003c\/b\u003e 36 x 31.5 x 10 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e set the pressure using a piece of the same wood: the nail should sit flush, neither sunk nor proud. And never point it at anyone or disable the contact safety trip.\u003c\/p\u003e\u003c\/blockquote\u003e\u003ch2\u003ePower for site work\u003c\/h2\u003e\u003cp\u003eNailing a complete formwork or pallet by hand is slow and exhausting. With the T-nail nailer, each nail goes in with a single shot and to the right depth, so one person can assemble in a morning what used to take a whole day. Its 2.2 mm nail, up to 64 mm long, ensures firm joints in construction and packaging timber.\u003c\/p\u003e\u003cp\u003eBecause it is designed for heavy-duty use, it withstands long days of continuous work on site, in structural carpentry or in pallet factories, and the carry case protects it during transport and storage between jobs.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat nails does it use?\u003c\/h3\u003e\u003cp\u003eIron or steel T-nails from 18 to 64 mm long and 2.2 mm thick.\u003c\/p\u003e\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\u003cp\u003eA workshop compressor with a regulator that reaches 8 bar; with a 50 L air tank you will work more comfortably.\u003c\/p\u003e\u003ch3\u003eWhat is it used for?\u003c\/h3\u003e\u003cp\u003eConstruction, formwork, packaging, timber houses and floorboards.\u003c\/p\u003e\u003ch3\u003eDoes it include a carry case?\u003c\/h3\u003e\u003cp\u003eYes, a plastic one.\u003c\/p\u003e\u003ch3\u003eHow is it maintained?\u003c\/h3\u003e\u003cp\u003eA few drops of pneumatic tool oil in the air inlet every day of use, and dry air.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What nails does it use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Iron or steel T-nails from 18 to 64 mm long and 2.2 mm thick.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A workshop compressor with a regulator that reaches 8 bar; with a 50 L air tank you will work more comfortably.\"}},{\"@type\":\"Question\",\"name\":\"What is it used for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Construction, formwork, packaging, timber houses and floorboards.\"}},{\"@type\":\"Question\",\"name\":\"Does it include a carry case?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, a plastic one.\"}},{\"@type\":\"Question\",\"name\":\"How is it maintained?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A few drops of pneumatic tool oil in the air inlet every day of use, and dry air.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641433575771,"sku":"CEVIK-R64KC","price":106.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/clavadora-neumatica-clavo-t-vica-work-1.jpg?v=1793865375"},{"product_id":"clavadora-neumatica-micropin","title":"Pneumatic micro pin nailer for fine finishing","description":"\u003cp\u003eFor fixing \u003cb\u003emouldings, glazing beads, architraves or veneers\u003c\/b\u003e without the nail showing, nothing beats a \u003cb\u003emicro pin\u003c\/b\u003e nailer: it leaves a tiny hole that hardly needs filling.\u003c\/p\u003e\u003cp\u003eTwo versions: \u003cb\u003e0.6 mm pin\u003c\/b\u003e (23 gauge) from 12 to 35 mm, headed and headless, or \u003cb\u003e0.8 mm pin\u003c\/b\u003e (21 gauge) from 12 to 40 mm, slightly stronger. Both with a \u003cb\u003e100-nail magazine\u003c\/b\u003e and working between 4 and 7 bar.\u003c\/p\u003e\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eInvisible finish:\u003c\/b\u003e the pin barely leaves a mark.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo gauges:\u003c\/b\u003e 0.6 mm for the finest work, 0.8 mm for more holding power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e100-nail magazine:\u003c\/b\u003e fewer reloads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustable pressure:\u003c\/b\u003e from 4 to 7 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLight and precise:\u003c\/b\u003e ideal for detailed work.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMouldings, glazing beads and architraves.\u003c\/li\u003e\n\u003cli\u003eFurniture, drawers and back panels.\u003c\/li\u003e\n\u003cli\u003eHolding parts while the glue dries.\u003c\/li\u003e\n\u003cli\u003eMarquetry, models and crafts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e0.6 mm pin:\u003c\/b\u003e 0.64 mm (23 gauge), headed and headless, 12-35 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e0.8 mm pin:\u003c\/b\u003e 0.84 mm (21 gauge), 12-40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagazine:\u003c\/b\u003e 100 nails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking pressure:\u003c\/b\u003e 4-7 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePresentation:\u003c\/b\u003e plastic carry case (0.6 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e micro pins hold, they are not structural: combine them with glue in joints. And adjust the pressure so that the head sits just below the surface.\u003c\/p\u003e\u003c\/blockquote\u003e\u003ch2\u003eA finish you can see\u003c\/h2\u003e\u003cp\u003eIn detailed work, what sets a professional finish apart from an amateur one is that you cannot see how it was done. A micro pin leaves a hole so small that often you don't even need filler, and because it is so thin it does not split glazing beads or delicate mouldings.\u003c\/p\u003e\u003cp\u003eIt is also the best aid for gluing: it holds the parts in place while the glue dries, with no need for clamps or presses, and lets you carry on working straight away. A tool that, once you've tried it, you won't want to be without in the workshop.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat is the difference between 0.6 and 0.8 mm?\u003c\/h3\u003e\u003cp\u003eThe 0.6 mm leaves less of a mark; the 0.8 mm holds slightly better and takes up to 40 mm.\u003c\/p\u003e\u003ch3\u003eWhat nails does it use?\u003c\/h3\u003e\u003cp\u003ePins and mini brads of 0.6 mm (12-35 mm) or 0.8 mm (12-40 mm) depending on model.\u003c\/p\u003e\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\u003cp\u003eIt uses little air: any compressor with a regulator between 4 and 7 bar.\u003c\/p\u003e\u003ch3\u003eHow many nails does it hold?\u003c\/h3\u003e\u003cp\u003eUp to 100.\u003c\/p\u003e\u003ch3\u003eIs it suitable for hardwood?\u003c\/h3\u003e\u003cp\u003eYes, with pins of the right length and the pressure properly adjusted.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is the difference between 0.6 and 0.8 mm?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The 0.6 mm leaves less of a mark; the 0.8 mm holds slightly better and takes up to 40 mm.\"}},{\"@type\":\"Question\",\"name\":\"What nails does it use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Pins and mini brads of 0.6 mm (12-35 mm) or 0.8 mm (12-40 mm) depending on model.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It uses little air: any compressor with a regulator between 4 and 7 bar.\"}},{\"@type\":\"Question\",\"name\":\"How many nails does it hold?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Up to 100.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for hardwood?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, with pins of the right length and the pressure properly adjusted.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Pin 0,6 mm · 12-35 mm","offer_id":54641434526043,"sku":"CEVIK-R6\/35","price":136.22,"currency_code":"EUR","in_stock":true},{"title":"Pin 0,8 mm · 12-40 mm","offer_id":54641434558811,"sku":"CEVIK-R8\/40","price":155.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/clavadora-neumatica-micropin-vica-work-1.jpg?v=1793865402"},{"product_id":"clavadora-neumatica-clavo-brad-15-50","title":"Pneumatic brad nailer 15 to 50 mm","description":"\u003cp\u003eThe most versatile nailer in carpentry: it fires \u003cb\u003e18-gauge brads from 15 to 50 mm\u003c\/b\u003e, enough for \u003cb\u003edoors, panels, frames, windows, wardrobes and shelving\u003c\/b\u003e, with a small head that is easy to conceal.\u003c\/p\u003e\u003cp\u003eChoose the \u003cb\u003estandard\u003c\/b\u003e version or the \u003cb\u003eprofessional\u003c\/b\u003e version, with a 100-nail magazine and plastic carry case. Both work at 4-7 bar with an air consumption of 53.4 l\/min.\u003c\/p\u003e\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e15 to 50 mm:\u003c\/b\u003e one nail for almost all carpentry work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSmall head:\u003c\/b\u003e clean finish that is easy to fill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModerate consumption:\u003c\/b\u003e 53.4 l\/min, suitable for medium-sized compressors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustable pressure:\u003c\/b\u003e from 4 to 7 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfessional version:\u003c\/b\u003e 100-nail magazine and carry case.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e🏗️ What it's for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDoor frames, architraves and mouldings.\u003c\/li\u003e\n\u003cli\u003eMaking wardrobes and shelving.\u003c\/li\u003e\n\u003cli\u003ePanels, tongue-and-groove boarding and cladding.\u003c\/li\u003e\n\u003cli\u003eWooden doors and windows.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eNail type:\u003c\/b\u003e 18-gauge brad\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNail length:\u003c\/b\u003e 15-50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking pressure:\u003c\/b\u003e 4-7 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 8.3 bar (professional)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAir consumption:\u003c\/b\u003e 53.4 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMagazine:\u003c\/b\u003e 100 nails (professional)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePresentation:\u003c\/b\u003e plastic carry case (professional)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e when nailing into board or hardwood, increase the pressure slightly; for thin mouldings, reduce it. Always test on an offcut before nailing the real piece.\u003c\/p\u003e\u003c\/blockquote\u003e\u003ch2\u003eWhy choose a brad nailer\u003c\/h2\u003e\u003cp\u003eThe brad is the carpenter's great all-rounder: thin enough not to split mouldings or architraves and long enough, up to 50 mm, to hold frames, panels or shelving. With a single nailer you can handle most finishing and assembly work, without constantly changing tools.\u003c\/p\u003e\u003cp\u003eCompared with a hammer, the time saved is huge: each nail goes in instantly, to just the right depth and without blows that mark the wood. The result is faster, cleaner work with a professional finish that barely needs filler.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat nails does it use?\u003c\/h3\u003e\u003cp\u003e18-gauge brads from 15 to 50 mm.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between the two versions?\u003c\/h3\u003e\u003cp\u003eThe professional version comes with a plastic carry case and a 100-nail magazine. Both fire the same 15 to 50 mm brads.\u003c\/p\u003e\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\u003cp\u003eOne that delivers around 55 l\/min at 4-7 bar; a 1.5-2 HP compressor with an air tank will do.\u003c\/p\u003e\u003ch3\u003eIs it suitable for floorboards?\u003c\/h3\u003e\u003cp\u003eFor structural flooring, a T-nail nailer or a heavier-gauge nailer is better.\u003c\/p\u003e\u003ch3\u003eHow is it maintained?\u003c\/h3\u003e\u003cp\u003eA few drops of pneumatic tool oil in the air inlet, and dry air.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What nails does it use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"18-gauge brads from 15 to 50 mm.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between the two versions?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The professional version comes with a plastic carry case and a 100-nail magazine. Both fire the same 15 to 50 mm brads.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"One that delivers around 55 l\/min at 4-7 bar; a 1.5-2 HP compressor with an air tank will do.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for floorboards?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For structural flooring, a T-nail nailer or a heavier-gauge nailer is better.\"}},{\"@type\":\"Question\",\"name\":\"How is it maintained?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A few drops of pneumatic tool oil in the air inlet, and dry air.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Standard","offer_id":54641436590427,"sku":"CEVIK-R12\/51D","price":38.22,"currency_code":"EUR","in_stock":true},{"title":"Professional with carry case","offer_id":54641436623195,"sku":"CEVIK-R18\/51","price":87.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/clavadora-neumatica-clavo-brad-15-50-vica-work-1.jpg?v=1793865442"},{"product_id":"clavadora-grapadora-neumatica-2-en-1","title":"2-in-1 pneumatic nailer and stapler for brads and type 90 staples","description":"\u003cp\u003e\u003cstrong\u003eOne tool for nailing and stapling.\u003c\/strong\u003e This 2-in-1 pneumatic nailer and stapler takes 18-gauge brads up to 50 mm and type 90 staples up to 40 mm, so you can go from fixing a glazing bead to stapling a board without changing machine.\u003c\/p\u003e\u003cp\u003eIt is ideal for carpentry and upholstery, and works with a low air consumption of 41.96 l\/min at a working pressure of 4 to 7 bar (maximum 8.3 bar), so it runs on small and medium-sized compressors.\u003c\/p\u003e\u003cp\u003eIt takes lengths of 15, 20, 25, 30, 35, 40, 45 and 50 mm, a very complete range for mouldings, furniture backs, frames, upholstery or cladding.\u003c\/p\u003e\u003cp\u003eFor carpenters or upholsterers who want fewer tools in the van, it is a very practical and economical solution.\u003c\/p\u003e\u003ch2\u003eKey benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 in 1:\u003c\/strong\u003e fires brads and type 90 staples with the same tool\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 50 mm:\u003c\/strong\u003e 18-gauge brads from 15 to 50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType 90 staples:\u003c\/strong\u003e up to 40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow consumption:\u003c\/strong\u003e 41.96 l\/min, suitable for small compressors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSavings:\u003c\/strong\u003e one machine instead of two\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it's for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCarpentry and furniture making.\u003c\/li\u003e\n\u003cli\u003eUpholstery.\u003c\/li\u003e\n\u003cli\u003eMouldings, glazing beads and architraves.\u003c\/li\u003e\n\u003cli\u003eFurniture backs and base panels.\u003c\/li\u003e\n\u003cli\u003eWooden frames and cladding.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNails:\u003c\/strong\u003e 18-gauge brads, up to 50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStaples:\u003c\/strong\u003e Type 90, up to 40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths:\u003c\/strong\u003e 15, 20, 25, 30, 35, 40, 45 and 50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 4-7 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 8.3 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir consumption:\u003c\/strong\u003e 41.96 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference:\u003c\/strong\u003e SF50\/40\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVetonek tip:\u003c\/strong\u003e set the pressure by testing on an offcut of the same wood: the nail or staple should sit flush, without sinking in too far. Never point the tool at anyone and disconnect the air before clearing jams or reloading.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat nails and staples does it take?\u003c\/h3\u003e\u003cp\u003e18-gauge brads up to 50 mm and type 90 staples up to 40 mm.\u003c\/p\u003e\u003ch3\u003eWhat lengths can I use?\u003c\/h3\u003e\u003cp\u003e15, 20, 25, 30, 35, 40, 45 and 50 mm.\u003c\/p\u003e\u003ch3\u003eWhat pressure does it need?\u003c\/h3\u003e\u003cp\u003eIt works between 4 and 7 bar, with a maximum pressure of 8.3 bar.\u003c\/p\u003e\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\u003cp\u003eIt consumes 41.96 l\/min, so a small or medium-sized compressor with a pressure regulator will do.\u003c\/p\u003e\u003ch3\u003eWhat jobs is it ideal for?\u003c\/h3\u003e\u003cp\u003eFor carpentry and upholstery: mouldings, furniture backs, frames and cladding.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What nails and staples does it take?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"18-gauge brads up to 50 mm and type 90 staples up to 40 mm.\"}},{\"@type\":\"Question\",\"name\":\"What lengths can I use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"15, 20, 25, 30, 35, 40, 45 and 50 mm.\"}},{\"@type\":\"Question\",\"name\":\"What pressure does it need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It works between 4 and 7 bar, with a maximum pressure of 8.3 bar.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It consumes 41.96 l\/min, so a small or medium-sized compressor with a pressure regulator will do.\"}},{\"@type\":\"Question\",\"name\":\"What jobs is it ideal for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For carpentry and upholstery: mouldings, furniture backs, frames and cladding.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641440194907,"sku":"CEVIK-SF50\/40","price":38.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/clavadora-grapadora-neumatica-2-en-1-vica-work-1.jpg?v=1793865460"},{"product_id":"juego-boquilla-aguja-pistola-pintar","title":"Nozzle and needle set for spray gun","description":"\u003cp\u003eHas your spray gun stopped atomising properly, or do you need a different nozzle size for another product? There is no need to change your gun. With this \u003cb\u003enozzle and needle set\u003c\/b\u003e you change the size in minutes and your gun once again gives a \u003cb\u003eclean, even fan pattern\u003c\/b\u003e, just like the first day.\u003c\/p\u003e\n\u003cp\u003eEach set includes \u003cb\u003e1 nozzle + 1 needle\u003c\/b\u003e as spares for the professional \u003cb\u003e1,000 cc suction (model 1855\/3L)\u003c\/b\u003e or \u003cb\u003e600 cc gravity (model 1856\/3)\u003c\/b\u003e spray guns. Choose \u003cb\u003e1.4 mm\u003c\/b\u003e for low-viscosity products such as varnishes and lacquers, or \u003cb\u003e2.0 mm\u003c\/b\u003e for primers and thicker products.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eChange the nozzle size without changing your gun:\u003c\/b\u003e a single gun for fine varnishes and thick primers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRestores the fan pattern:\u003c\/b\u003e a worn nozzle or needle is the most common cause of uneven atomisation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eComplete set:\u003c\/b\u003e nozzle and needle, the parts that determine the paint flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFour versions:\u003c\/b\u003e suction or gravity, in 1.4 or 2.0 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy fitting:\u003c\/b\u003e replaced in the workshop with the gun's own spanner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSwitching from varnishes and lacquers (1.4 mm) to primers and fillers (2.0 mm).\u003c\/li\u003e\n\u003cli\u003eRepairing guns with a bent needle or damaged nozzle.\u003c\/li\u003e\n\u003cli\u003eKeeping a spare set in carpentry and body and paint workshops.\u003c\/li\u003e\n\u003cli\u003eMaintaining finish quality when painting furniture and car bodies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e📋 Technical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eContents:\u003c\/b\u003e 1 nozzle + 1 needle\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAvailable sizes:\u003c\/b\u003e 1.4 mm and 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSuction version:\u003c\/b\u003e for 1,000 cc professional gun, model 1855\/3L\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGravity version:\u003c\/b\u003e for 600 cc professional gun, model 1856\/3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e1.4 mm use:\u003c\/b\u003e varnishes, lacquers and low-viscosity products\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e2.0 mm use:\u003c\/b\u003e primers and dense products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Vetonek tip:\u003c\/b\u003e always change the nozzle and needle together, because they wear at the same time and work as a pair. Fit the needle with the trigger pulled so as not to damage its tip, and clean the gun thoroughly with solvent before the change.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhich size should I choose?\u003c\/h3\u003e\n\u003cp\u003e1.4 mm for varnishes and lacquers; 2.0 mm for primers and thick products.\u003c\/p\u003e\n\u003ch3\u003eDoes the air cap need changing too?\u003c\/h3\u003e\n\u003cp\u003eThe set includes the nozzle and needle, which are the parts that determine the flow.\u003c\/p\u003e\n\u003ch3\u003eWhich spray guns is it for?\u003c\/h3\u003e\n\u003cp\u003eFor the 1,000 cc professional suction gun (model 1855\/3L) or the 600 cc gravity gun (model 1856\/3), depending on the version you choose.\u003c\/p\u003e\n\u003ch3\u003eWhen should I change the nozzle and needle?\u003c\/h3\u003e\n\u003cp\u003eWhen the fan pattern comes out uneven, drips or spits paint even though the gun is clean, or when you want to work with a product of a different viscosity.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for the semi-professional spray gun?\u003c\/h3\u003e\n\u003cp\u003eNo, it is designed for the 1855\/3L and 1856\/3 professional versions.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Which size should I choose?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"1.4 mm for varnishes and lacquers; 2.0 mm for primers and thick products.\"}},{\"@type\":\"Question\",\"name\":\"Does the air cap need changing too?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The set includes the nozzle and needle, which are the parts that determine the flow.\"}},{\"@type\":\"Question\",\"name\":\"Which spray guns is it for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For the 1,000 cc professional suction gun (model 1855\/3L) or the 600 cc gravity gun (model 1856\/3), depending on the version you choose.\"}},{\"@type\":\"Question\",\"name\":\"When should I change the nozzle and needle?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"When the fan pattern comes out uneven, drips or spits paint even though the gun is clean, or when you want to work with a product of a different viscosity.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for the semi-professional spray gun?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No, it is designed for the 1855\/3L and 1856\/3 professional versions.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Suction 1,000 cc · 1.4 mm","offer_id":54641442029915,"sku":"CEVIK-CA-KIT1.4\/1855","price":19.55,"currency_code":"EUR","in_stock":true},{"title":"Suction 1,000 cc · 2.0 mm","offer_id":54641442062683,"sku":"CEVIK-CA-KIT2.0\/1855","price":19.55,"currency_code":"EUR","in_stock":true},{"title":"Gravity 600 cc · 1.4 mm","offer_id":54641442095451,"sku":"CEVIK-CA-KIT1.4\/1856","price":19.55,"currency_code":"EUR","in_stock":true},{"title":"Gravity 600 cc · 2.0 mm","offer_id":54641442128219,"sku":"CEVIK-CA-KIT2.0\/1856","price":19.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/juego-boquilla-aguja-pistola-pintar-vica-work-1.jpg?v=1793865483"},{"product_id":"cizalla-neumatica-chapa","title":"Pneumatic shears for sheet metal and plastic","description":"\u003cp\u003e\u003cstrong\u003eCuts sheet metal like paper, without the effort of manual snips.\u003c\/strong\u003e These Aeropro air shears cut steel, aluminium and tin sheet and most plastics, so you can make straight or curved cuts quickly and without tiring your hand.\u003c\/p\u003e\u003cp\u003eThey have a heavy-duty cutting head, an ergonomic grip and a rear air exhaust, which directs the air away from the work area and your face. They run at 2,300 rpm with an air consumption of 128 l\/min, so a 3 HP compressor is recommended.\u003c\/p\u003e\u003cp\u003eIt is a tool much valued in bodywork, HVAC, ductwork, metal roofing and sheet metal workshops in general.\u003c\/p\u003e\u003cp\u003eIt cuts cleanly and precisely, and saves a lot of time compared with cutting by hand.\u003c\/p\u003e\u003ch2\u003eKey benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts several materials:\u003c\/strong\u003e steel, aluminium and tin sheet, and plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty head:\u003c\/strong\u003e clean, long-lasting cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eErgonomic grip:\u003c\/strong\u003e less fatigue on long cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear air exhaust:\u003c\/strong\u003e the air does not disturb the cutting area\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffortless:\u003c\/strong\u003e replaces manual tin snips\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it's for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBodywork and sheet metal repair.\u003c\/li\u003e\n\u003cli\u003eHVAC ductwork.\u003c\/li\u003e\n\u003cli\u003eMetal roofing and flashings.\u003c\/li\u003e\n\u003cli\u003eCutting plastics in the workshop.\u003c\/li\u003e\n\u003cli\u003eFabrication and prototyping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Aeropro\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e Steel, aluminium and tin sheet; plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 2,300 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir consumption:\u003c\/strong\u003e 128 l\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir inlet:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended compressor:\u003c\/strong\u003e 3 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacked weight:\u003c\/strong\u003e 1.08 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 28 x 16 x 6 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference:\u003c\/strong\u003e RP17610\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVetonek tip:\u003c\/strong\u003e mark the cutting line with a marker pen and let the shears advance at their own pace, without forcing them. Wear glasses and gloves: freshly cut sheet metal edges are very sharp. Lubricate the air inlet daily.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat materials do they cut?\u003c\/h3\u003e\u003cp\u003eSteel, aluminium and tin sheet, and most plastics.\u003c\/p\u003e\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\u003cp\u003eA 3 HP compressor is recommended; they consume 128 l\/min.\u003c\/p\u003e\u003ch3\u003eWhat air inlet does it have?\u003c\/h3\u003e\u003cp\u003eA 1\/4\" air inlet.\u003c\/p\u003e\u003ch3\u003eWhat is the rear air exhaust for?\u003c\/h3\u003e\u003cp\u003eIt directs the exhaust air away from the cutting area and the user's face.\u003c\/p\u003e\u003ch3\u003eHow do I maintain them?\u003c\/h3\u003e\u003cp\u003eA few drops of pneumatic tool oil in the air inlet every day of use, and dry, filtered air.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What materials do they cut?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Steel, aluminium and tin sheet, and most plastics.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A 3 HP compressor is recommended; they consume 128 l\/min.\"}},{\"@type\":\"Question\",\"name\":\"What air inlet does it have?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A 1\/4\\\" air inlet.\"}},{\"@type\":\"Question\",\"name\":\"What is the rear air exhaust for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It directs the exhaust air away from the cutting area and the user's face.\"}},{\"@type\":\"Question\",\"name\":\"How do I maintain them?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A few drops of pneumatic tool oil in the air inlet every day of use, and dry, filtered air.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641442554203,"sku":"CEVIK-NE-RP17610","price":50.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/cizalla-neumatica-chapa-vica-work-1.jpg?v=1793865508"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/collections\/multiherramienta-oscilante-neumatica-vica-work-1.jpg?v=1794128149","url":"https:\/\/vetonek.com\/en\/collections\/herramienta-neumatica.oembed","provider":"Vetonek","version":"1.0","type":"link"}