{"product_id":"grapadora-neumatica-chapa-corrugada","title":"Pneumatic corrugated fastener stapler for joining wood","description":"\u003cp\u003e\u003cb\u003eCorrugated fasteners\u003c\/b\u003e (wiggle nails) are the fastest way to join mitres and assemble \u003cb\u003elight timber structures\u003c\/b\u003e. This pneumatic stapler drives them in a single shot, leaving the joint flat and firm.\u003c\/p\u003e\n\u003cp\u003eIt takes fasteners \u003cb\u003e9 to 12 mm\u003c\/b\u003e high and \u003cb\u003e25.4 mm\u003c\/b\u003e wide and works between \u003cb\u003e4.5 and 8 bar\u003c\/b\u003e. Designed for \u003cb\u003eheavy-duty use\u003c\/b\u003e in carpentry, it is supplied in a carry case.\u003c\/p\u003e\n\u003ch2\u003e✅ Key benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eFast joints:\u003c\/b\u003e one shot per joint, without glue or screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlat joint:\u003c\/b\u003e the fastener sits flush with the wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeavy-duty use:\u003c\/b\u003e robust build for professional carpentry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustable pressure:\u003c\/b\u003e from 4.5 to 8 bar depending on the wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarry case:\u003c\/b\u003e protected transport and storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e🏗️ What it is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAssembling light timber structures.\u003c\/li\u003e\n\u003cli\u003eFixing door casings and architraves.\u003c\/li\u003e\n\u003cli\u003eFrames, stretchers and boxes.\u003c\/li\u003e\n\u003cli\u003eCarpentry and furniture manufacture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e📋 Technical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eFastener type:\u003c\/b\u003e corrugated fastener\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFastener height:\u003c\/b\u003e 9-12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFastener width:\u003c\/b\u003e 25.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorking pressure:\u003c\/b\u003e 4.5-8 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaximum pressure:\u003c\/b\u003e 8 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUse:\u003c\/b\u003e heavy-duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e matt black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePresentation:\u003c\/b\u003e carry case\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePacked weight:\u003c\/b\u003e 2.6 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePackaging:\u003c\/b\u003e 30 x 8.7 x 27 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cb\u003e💡 Pro tip:\u003c\/b\u003e rest the stapler nose firmly on the joint and keep the pieces clamped: the corrugated fastener pulls the two pieces of wood together and closes the joint, but only if they do not move when you fire.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003ch3\u003e🔧 How to get the most out of it\u003c\/h3\u003e\n\u003cp\u003eAlways work with the pressure within the 4.5 to 8 bar range and adjust it to the hardness of the wood: on softwoods lower it slightly so that the fastener does not sink in too far, and on hardwoods raise it without exceeding the maximum. Fit a filter regulator at the compressor outlet and a lubricator, or put a few drops of pneumatic oil into the air inlet at the start of the working day: the firing mechanism will work more smoothly and last many more cycles. Store it in its carry case, with no fasteners in the magazine, when not in use.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat fasteners does it use?\u003c\/h3\u003e\n\u003cp\u003eCorrugated fasteners 9 to 12 mm high and 25.4 mm wide.\u003c\/p\u003e\n\u003ch3\u003eWhat pressure do I need?\u003c\/h3\u003e\n\u003cp\u003eBetween 4.5 and 8 bar depending on the hardness of the wood.\u003c\/p\u003e\n\u003ch3\u003eWhat is it used for?\u003c\/h3\u003e\n\u003cp\u003eFor assembling light timber structures and fixing door casings.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with a carry case?\u003c\/h3\u003e\n\u003cp\u003eYes.\u003c\/p\u003e\n\u003ch3\u003eWhat compressor do I need?\u003c\/h3\u003e\n\u003cp\u003eAny workshop compressor with a regulator that reaches 8 bar.\u003c\/p\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What fasteners does it use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Corrugated fasteners 9 to 12 mm high and 25.4 mm wide.\"}},{\"@type\":\"Question\",\"name\":\"What pressure do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Between 4.5 and 8 bar depending on the hardness of the wood.\"}},{\"@type\":\"Question\",\"name\":\"What is it used for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For assembling light timber structures and fixing door casings.\"}},{\"@type\":\"Question\",\"name\":\"Does it come with a carry case?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes.\"}},{\"@type\":\"Question\",\"name\":\"What compressor do I need?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Any workshop compressor with a regulator that reaches 8 bar.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Unit","offer_id":54641432461659,"sku":"CEVIK-MCCF15PK","price":318.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/grapadora-neumatica-chapa-corrugada-vica-work-1.jpg?v=1793865330","url":"https:\/\/vetonek.com\/en\/products\/grapadora-neumatica-chapa-corrugada","provider":"Vetonek","version":"1.0","type":"link"}