{"product_id":"rodillo-arrastre-hilo-soldadora-promig","title":"Wire drive roll for PROMIG welders","description":"\u003cp\u003e\u003cstrong\u003eThe right drive roll for every wire: your PROMIG welder will feed without slipping or crushing.\u003c\/strong\u003e Each type of wire needs its own groove: smooth for steel, knurled for flux-cored and U-shaped for aluminium. Using the wrong one is the most common cause of jams, deformed wire and an unstable arc. This wire drive roll is the spare part for PROMIG welders: choose according to your machine and the wire you are going to use.\u003c\/p\u003e\u003cp\u003eSteel version 0.6-0.8 mm for PROMIG 165 and 200; 0.8-1.0 mm flux-cored wire version for PROMIG 200; and 1.0-1.2 mm aluminium version for PROMIG 291. With the right drive roll, the wire feeds smoothly and the bead comes out even.\u003c\/p\u003e\u003ch2\u003eBenefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific groove:\u003c\/strong\u003e steel, flux-cored or aluminium, without deforming the wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFewer jams:\u003c\/strong\u003e constant feed to the torch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect replacement:\u003c\/strong\u003e for the PROMIG models shown in each option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick change:\u003c\/strong\u003e replaced in the feeder in minutes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing a worn drive roll on PROMIG welders.\u003c\/li\u003e\n\u003cli\u003eSwitching to gasless flux-cored wire on the PROMIG 200.\u003c\/li\u003e\n\u003cli\u003eWelding aluminium with the PROMIG 291.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel 0.6-0.8 mm:\u003c\/strong\u003e for PROMIG 165 and 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlux-cored 0.8-1.0 mm:\u003c\/strong\u003e for PROMIG 200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium 1.0-1.2 mm:\u003c\/strong\u003e for PROMIG 291\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e wire drive roll\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eFlux-cored and aluminium wire need their own roller: with a steel one, flux-cored wire gets crushed and aluminium deforms. Adjust the tension arm pressure just enough to stop the wire slipping.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhy are there different drive rolls depending on the wire?\u003c\/h3\u003e\u003cp\u003eEach wire needs a different groove: smooth for steel, knurled for flux-cored and U-shaped for aluminium, so it is fed without being deformed.\u003c\/p\u003e\u003ch3\u003eWhich welders are they for?\u003c\/h3\u003e\u003cp\u003eFor the PROMIG models shown in each option: PROMIG 165 and 200, PROMIG 200 (flux-cored) and PROMIG 291 (aluminium).\u003c\/p\u003e\u003ch3\u003eWhat is flux-cored wire?\u003c\/h3\u003e\u003cp\u003eA hollow wire filled with flux that allows welding without gas. It needs a knurled drive roll.\u003c\/p\u003e\u003ch3\u003eDo I need to change anything else when changing wire?\u003c\/h3\u003e\u003cp\u003eYes, the contact tip for the corresponding diameter and, for aluminium, it is advisable to use a Teflon liner.\u003c\/p\u003e\u003ch3\u003eHow do I know if the drive roll is worn?\u003c\/h3\u003e\u003cp\u003eIf the wire slips even when you adjust the pressure, or you see the groove is worn or has shavings, it is time to change it.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Why are there different drive rolls depending on the wire?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Each wire needs a different groove: smooth for steel, knurled for flux-cored and U-shaped for aluminium, so it is fed without being deformed.\"}},{\"@type\":\"Question\",\"name\":\"Which welders are they for?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"For the PROMIG models shown in each option: PROMIG 165 and 200, PROMIG 200 (flux-cored) and PROMIG 291 (aluminium).\"}},{\"@type\":\"Question\",\"name\":\"What is flux-cored wire?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A hollow wire filled with flux that allows welding without gas. It needs a knurled drive roll.\"}},{\"@type\":\"Question\",\"name\":\"Do I need to change anything else when changing wire?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, the contact tip for the corresponding diameter and, for aluminium, it is advisable to use a Teflon liner.\"}},{\"@type\":\"Question\",\"name\":\"How do I know if the drive roll is worn?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"If the wire slips even when you adjust the pressure, or you see the groove is worn or has shavings, it is time to change it.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Steel 0.6-0.8 mm · PROMIG 165-200","offer_id":54641402020187,"sku":"CEVIK-CE-ROLDA-PROMIG","price":21.56,"currency_code":"EUR","in_stock":true},{"title":"Flux-cored 0.8-1.0 mm · PROMIG 200","offer_id":54641402052955,"sku":"CEVIK-CE-PROMIG200-AN","price":18.62,"currency_code":"EUR","in_stock":true},{"title":"Aluminium 1.0-1.2 mm · PROMIG 291","offer_id":54641402085723,"sku":"CEVIK-CE-PROMIG291AL","price":19.6,"currency_code":"EUR","in_stock":true}],"url":"https:\/\/vetonek.com\/en\/products\/rodillo-arrastre-hilo-soldadora-promig","provider":"Vetonek","version":"1.0","type":"link"}