{"product_id":"roldana-arrastre-soldadora-promig-291-301-315dp","title":"Drive roll for PROMIG 291, 301 and 315DP welders","description":"\u003cp\u003e\u003cstrong\u003eGive your PROMIG291, 301 or 315DP smooth, constant wire feed again.\u003c\/strong\u003e If the wire slips, feeds in jerks or tangles at the torch inlet, the culprit is often a worn drive roll or a groove that does not match the wire. This drive roll is the spare part for the wire feeder of the PROMIG291, PROMIG301 and PROMIG315DP multi-process welders: it guides and pushes the wire towards the torch without deforming it.\u003c\/p\u003e\u003cp\u003eChoose the groove to suit your wire: 0.8-1.0 mm steel, 1.0-1.2 mm steel or 1.0-1.2 mm flux-cored wire.\u003c\/p\u003e\u003ch2\u003eBenefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable feed:\u003c\/strong\u003e fewer jams and a more even arc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersions by wire type:\u003c\/strong\u003e solid steel or flux-cored.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect replacement:\u003c\/strong\u003e for PROMIG291, PROMIG301 and PROMIG315DP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick change:\u003c\/strong\u003e replaced in the feeder in minutes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it is for\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReplacing a worn drive roll.\u003c\/li\u003e\n\u003cli\u003eSwitching from solid wire to gasless flux-cored wire, or changing diameter.\u003c\/li\u003e\n\u003cli\u003eMetalwork, boilermaking and maintenance workshops.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e wire drive roll\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e PROMIG291, PROMIG301 and PROMIG315DP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersions:\u003c\/strong\u003e steel 0.8-1.0 mm · steel 1.0-1.2 mm · flux-cored wire 1.0-1.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e single unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVetonek tip\u003c\/h2\u003e\u003cp\u003eFor flux-cored wire, always use the knurled flux-cored drive roll: with the steel one the wire slips and, if you tighten it further, it gets crushed. When changing diameter, also change the contact tip.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat is flux-cored wire?\u003c\/h3\u003e\u003cp\u003eIt is tubular wire with a flux core. It needs a knurled drive roll that feeds it without crushing it.\u003c\/p\u003e\u003ch3\u003eHow do I know which drive roll to use?\u003c\/h3\u003e\u003cp\u003eIt must match the diameter and type of wire: solid steel or flux-cored.\u003c\/p\u003e\u003ch3\u003eIs it suitable for other welders?\u003c\/h3\u003e\u003cp\u003eIt is intended for the PROMIG291, PROMIG301 and PROMIG315DP.\u003c\/p\u003e\u003ch3\u003eIs there an aluminium version?\u003c\/h3\u003e\u003cp\u003eNot in this reference; for aluminium on the PROMIG291 we have a specific 1.0-1.2 mm drive roll.\u003c\/p\u003e\u003ch3\u003eWhen should I change it?\u003c\/h3\u003e\u003cp\u003eWhen the groove is worn, the wire slips even when you adjust the pressure, or you see wire shavings in the feeder.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What is flux-cored wire?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is tubular wire with a flux core. It needs a knurled drive roll that feeds it without crushing it.\"}},{\"@type\":\"Question\",\"name\":\"How do I know which drive roll to use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It must match the diameter and type of wire: solid steel or flux-cored.\"}},{\"@type\":\"Question\",\"name\":\"Is it suitable for other welders?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is intended for the PROMIG291, PROMIG301 and PROMIG315DP.\"}},{\"@type\":\"Question\",\"name\":\"Is there an aluminium version?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not in this reference; for aluminium on the PROMIG291 we have a specific 1.0-1.2 mm drive roll.\"}},{\"@type\":\"Question\",\"name\":\"When should I change it?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"When the groove is worn, the wire slips even when you adjust the pressure, or you see wire shavings in the feeder.\"}}]}\u003c\/script\u003e","brand":"Vica Work","offers":[{"title":"Steel 0.8-1.0 mm","offer_id":54641421189467,"sku":"CEVIK-CE-PROMIG291AC","price":19.6,"currency_code":"EUR","in_stock":true},{"title":"Steel 1.0-1.2 mm","offer_id":54641421222235,"sku":"CEVIK-CE-PROMIG291AC2","price":19.6,"currency_code":"EUR","in_stock":true},{"title":"Flux-cored wire 1.0-1.2 mm","offer_id":54641421255003,"sku":"CEVIK-CE-PROMIG291AN","price":19.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0276\/9698\/8257\/files\/roldana-arrastre-soldadora-promig-291-301-315dp-vica-work-1.jpg?v=1793864923","url":"https:\/\/vetonek.com\/en\/products\/roldana-arrastre-soldadora-promig-291-301-315dp","provider":"Vetonek","version":"1.0","type":"link"}