Splipboard Split
Description
Boarding of slate with 2 natural faces and 4 serrated faces, of smooth slate that does not oxidize. Available in 3 sizes, 50x10x3 cm. (5 kg.), 100x10x3 cm. (10 kg.) And 100x10x6 cm. (20 kg.) It is a high -resistance product and a natural beauty of great character due to its dark gray color. The two sizes are manageable without problem.
Slate pickup
Also called slate picks, it can be used to separate different areas in your garden, delimit roads and trails, and also placed vertically, small decorative fences can be made, creating a really original and spectacular effect.
The name of Piqueta comes because it is a product they used in Bordeaux for the support of grape vineyards.
Advantages of the board in the garden
- High resistance and durability, it is a very compact natural stone so that water and frost do not affect it.
- Stable aesthetics, the board will not change over time, keep in mind that the main use of the board is the tiles, in the roofs where for centuries they remain unchanging both in form and in color.
- Very simple installation. Just place it on the floor or on a sand bed and the board is not going to move.
- Originality and contrast. Any natural stone is beautiful and shocking in itself, but the blackboard combined with other white stones creates a spectacular effect, due to its intense color and texture.
- Non -slip by nature. Due to its texture it is a very non -slip pavement, it does not need any type of treatment, you are not going to slip.
- No mushrooms. It is such a compact, little porous material, that mushrooms, fungi, etc ... do not affect it.
- No cleaning. Being so little or nothing porous, dirt is not embedded. It can take some dust but with a little water the pieces are going to stay new, like the first day.
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.