Ordesa Cladding - Facing with Natural Stone Texture
Ordesa Cladding: concrete facing with a natural stone texture
Cladding a wall with real natural stone drives up the cost, adds considerable weight to the surface and forces slow, highly artisanal installation. Ordesa Cladding is made with precision molds that reproduce the grain, pore and relief of authentic stone, at just 2.5 cm thick and 2.1 kg per piece in the 20 × 20 cm format, suitable for indoor and outdoor use.
✅ Key advantages
Authentic stone texture: the molds replicate every detail and relief of real stone, without its cost or weight.
Slim profile: at 2.5 cm it barely takes up usable space in a room and needs no reinforcement of the wall.
Indoor and outdoor: the same material and the same layout inside and outside the home, for a continuous project.
Five combinable formats: from 20 × 20 cm to 30 × 60 cm, for building panels with an irregular, masonry-style layout.
Known coverage: 25.00 pieces per m² in the 20 × 20 cm format, so you can order without surprises.
Two standard colors: Caliza and Pirineos, the two tones that pair best with wood and lacquered aluminum joinery.
🏗️ Recommended applications
Façades and plinths of single-family homes
Decorative panels in living rooms, entrance halls and fireplace surrounds
Boundary walls and garden fences
Commercial premises, wine cellars, grill houses and restaurants
Renovation of existing brick, block or concrete walls
Low walls for porches, barbecues and pool areas
📋 Technical specifications
Material: concrete with a stone-imitation finish
Thickness: 2.5 cm
Formats: 20 × 20 × 2.5 cm · 20 × 30 × 2.5 cm · 20 × 40 × 2.5 cm · 30 × 30 × 2.5 cm · 30 × 60 × 2.5 cm
Weight per piece: 2.1 kg in the 20 × 20 × 2.5 cm format
Pieces per m²: 25.00 (20 × 20 cm format)
Colors: Caliza, Pirineos
Use: indoor and outdoor
Packaging: single unit and pallet
🧰 Installation
Check that the substrate is clean, sound and free of dust or formwork residue; dampen it slightly if the surface is very absorbent.
Spread pieces from several boxes on the ground and lay out the pattern before bonding anything, mixing tones and sizes.
Spread exterior-grade tile adhesive with a notched trowel on the substrate and also apply a thin layer to the back of the piece (double buttering).
Fit pieces from bottom to top, pressing and twisting each one slightly to bed it, and check it's level every two or three rows.
Leave the joint you've decided on (or butt-join) and grout with joint mortar once the adhesive has cured.
Clean off residue with a damp sponge before it hardens and, outdoors, consider a colorless water repellent.
📦 Available formats
20 × 20 × 2.5 cm — Caliza or Pirineos — single unit or pallet
20 × 30 × 2.5 cm — Caliza or Pirineos — single unit or pallet
20 × 40 × 2.5 cm — Caliza or Pirineos — single unit or pallet
30 × 30 × 2.5 cm — Caliza or Pirineos — single unit or pallet
30 × 60 × 2.5 cm — Caliza or Pirineos — single unit or pallet
💡 Professional tip: always allow 10% extra material over the measured m²: between corner cuts and pieces that break while fitting, that margin is what saves you from having to order a second batch. And if you do order more later, the tone may not match: since it's a pigmented product, each batch has slight variations, so buy all the material at once and mix it from several boxes as you install.
Todo perfecto
Envío rápido, aunque el transportista se hizonun lío con el bulto, al final la entrega fué perfecta.
Combre grava de río, el diámetro ybel color coinciden con lo ofertado. Venía algo sucia, pero nada del otro mundo.
La relación calidad/precio es inmellorable.
