Skip to product information

Slab supports (4 pcs.)

3,95 €
3,95 €
Tax included. Shipping calculated at checkout.

Description

Plastic piece for laying garden slabs, place your slabs easily and raise the height of your pavement.

Advantages of using plots with garden tiles

- Perfectly level floor, several pieces can be superimposed to ensure that the floor is level if your floor is not perfectly flat.

- We achieve expansion joints that prevent breakage, both in winter and summer the slabs can expand, with the plots we manage to leave an expansion joint that allows the slabs to "breathe".

- Drainage, the expansion joint itself allows rainwater to drain, this allows the pavement to dry sooner, preventing dangerous puddles from forming for people and for the durability of the slabs.

- These expansion joints allow the diffusion of water vapor, important in areas where a lot of heat can accumulate.

- Perfect for developing a raised floor, offering the possibility of running cables, easily accessing manholes, etc.

 

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.