3x3 m light camping carpet
Description
Camping mat can be used indoors and exterior to create a comfortable, clean and safe surface. Durade material: This camping mat is made of polyester with a PVC foam coating, which is resistant to UV rays, durable, does not easily break with your hand and can be used for a long time. Practical design: the design of the Grid pattern increases friction and has high non -slip yield, which makes it breathable, mold resistant and easy to store. Useful fácile: This camping carpet is large enough and can be easily cut to adapt to your specific needs . In addition, it is folding, so you can save it in a small space when it is not in use. Stores and air mattresses from drilling holes, so it is ideal for camping and traveling. In addition, it can also be used indoors to keep the futon, the cushions of the seats and the mattresses in their place. Useful information: Keep in mind that this mat is designed for use on hard surfaces, except concrete. And it is not designed for use in vinyl, lacquered, acrylic, natural stone, porous surfaces, reprimands or soils with heating.
- Color: light gray
- Material: polyester network with PVC foam coating
- Dimensions: 3 x 3 m (length x wide)
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.