Beach umbrella with side walls anthracite 215 cm

40,34 €
40,34 € 45,40 €
You save 11% (5,06 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This beach umbrella will keep you safe, fresh and dry, whether you are on the beach and on the grass, so you can enjoy your time outdoors! First quality material: Polyester is a synthetic material, known for its UV protection and elastic resistance. The polyester is water resistant, so it is the perfect option for wet or rainy conditions and is easy to clean. Sun protection ” Complete cover: This outdoor umbrella includes two side walls that can be easily connected and disconnected with a hook and loop closure panel, allowing the angle and direction of the sunscreen to be modified to adapt to varied situations and provide shade options Additional. Effective air flow: Thanks to the Airvention design, this umbrella offers a soft air circulation, so that you feel more comfortable and fresh. Steel structure: The steel structure guarantees its robustness and stability.

  • Color: Anthracite gray
  • Material: fabric (100% polyester) with silver coating, powder coating steel
  • Dimensions: 190 x 202/218 cm (High diameter)
  • Arch length: 215 cm
  • Post diameter: 22/25 mm
  • Includes two removable side walls
  • It has Airvention
  • UV protection
  • Water resistant
  • Ideal to use on the beach or in the garden
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.