Black ice cubes 45 kg/24 h

397,02 €
397,02 € 446,84 €
You save 11% (49,82 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With this modern ice cubes machine, you can prepare the best ice drinks and fruits at any time. This machine can produce up to 45 kg of ice per day and 36 ice cubes per cycle. Our machine can make fast ice cubes but with little noise. It comes with a transparent window that allows you to control the status of ice cubes at all times. The machine will emit an alarm when ice cubes are full or water is not enough. This type of ice machine is not only suitable for domestic use, but also for restaurants, hotels and workplaces. Keep in mind that this ice machine must remain standing for 48 hours before using it.

  • Color: Silver
  • Material: stainless steel
  • Dimensions: 36 x 34.5 x 63 cm (length x width x high)
  • Tension: 220-240 V ~, 50 Hz
  • Ice production capacity: 45 kg/24 hours
  • Nominal current: 1.7 A
  • 36 ice cubes per cycle
  • Evaporator and compressor
  • Water input system
  • Fast ice manufacturing
  • Little noisy
  • Includes ice basket and ice shovel
  • Alarm when the freezer compartment is full or the water is not enough
Please leave the machine at rest for 24 hours after receiving it. Otherwise, the machine will damage! This device can be used by children over 8 years and people with reduced physical, sensory or mental abilities, or who lack experience and knowledge, provided they are supervised or have received instructions on the use of the apparatus safely and understand The dangers that entails. Children should not play with the device. The cleaning and maintenance of the device should not be carried out by children without supervision. GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.