Skip to product information
  • Vetonek Sofá diván con cojines tela gris taupe

Divan sofa with cushions Gray taupe

135,50 €
135,50 € 152,51 €
You save 11% (17,01 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This couch is a decorative complement to your home and gives a cozy touch. First quality material: The fabric has a simple and clean appearance, and is breathable and last Body return while you are lying. Metal Pats: These chromed steel legs of the couch sofa guarantee robustness and stability. Elegant aspect: refined with elegant lines and a precise structure, this chaise longue is a welcoming and modern contribution for your garden. Useful information: To facilitate assembly, each product is delivered with a manual. The total length is less than that of a normal sofa, so adults cannot relax completely in it.

  • Color: Taupe Gray
  • Material: fabric (100% polyester), plywood, chrome steel
  • Filling material: foam, pp fiber
  • Total dimensions: 133.5 x 56 x 74 cm (length x width x high)
  • Seat dimensions: 97.5 x 56 cm (length x wide)
  • Seat height from the ground: 37 cm
  • Backup dimensions: 51 x 45 cm (deep x width)
  • Non -adjustable support
  • Maximum load capacity: 110 kg
  • Requires assembly: Yes
  • Delivery contains:
  • 1 X Divan
  • 1 x seat cushion
  • 1 x support cushion
Maximum 110 kg per seat. Take into account the risk of open fire and other sources of intense heat in the vicinity of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.