Skip to product information
  • Vetonek Soporte pedestal doble lavadora con estantes extraíbles blanco

Double washer pedestal support with white removable shelves

223,01 €
223,01 € 250,99 €
You save 11% (27,98 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This washer pedestal with removable shelves is designed to maintain appliances such as the washing machine away from the ground and raise them to a more appropriate work height. Stable and lasting structure: steel is strong, stable and lasting, which makes it the ideal option For a wide range of applications, from the manufacture of furniture to construction. Manufactured in steel, the pedestal can contain a washing machine with a weight of up to 200 kg. Non -slip design: thanks to the non -slip pads, the washing machine will remain stable. The legs are also covered with rubber, which makes them non -slip and prevents the soil from being ray. Scope. Practical Design: This pedestal can be used to keep the washing machine away from the ground and raise it to a more appropriate work height, so you will not have to be exchanged too much to load or get your clothes.

  • Color: White
  • Material: Steel
  • Weight: 9.4 kg
  • Dimensions: 120 x 56 x 52 cm (wide x high x high)
  • Load capacity: 200 kg
  • Suitable for all standard washing machines.
  • With non -slip pads
  • With 2 removable shelves
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.