Skip to product information
  • Leifheit Portarrollos de cocina de pared Parat F2 blanco 25771

LEIFHEIT PARAT F2 WALL KITCHEN CARROLLLOS 25771

45,22 €
45,22 € 50,89 €
You save 11% (5,67 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Leifheit's Parath F2 wall portarrolls has a robust plastic construction and shortly and clean the aluminum foil and film paper with its special sharp blades, without wasting time in the drawer, with sticky and irregular edges and without to play With the adhesive film because it is difficult to find the end. After cutting, the ends of the sheet are always easy to find and grab for next time. Sharp blades are hidden behind the cutting handles with ergonomic shape. The wall portarrolls has space for aluminum foil, film and cooking paper, and the upper part has high edges to be used as a spice shelf. The kitchen paper support has an integrated brake to facilitate the lag of the leaves. Remove the plastic housing, place the rolls and the wall portarrolls will be ready to use. It is suitable for all commercial roll sizes (not included rolls).

  • Color: White
  • Material: Plastic
  • Reliable portarroles for 3 rolls
  • It also serves as spices for spices
  • SUPPORT SUPPORT FOR KITCHEN PAPER WITH INTEGRATED ROLL BRAKE
  • Clean cutting edges thanks to sharp blades
  • The leaves are always easy to find and grab
  • Simple installation on the wall
  • The rolls and spices are not included
Important: When inserting, the two ends of the films must be up. Throw the ends of the films not towards the edge of a cut. Push the cut slider to the side

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.