Skip to product information
  • Vetonek Mampara puerta de ducha vidrio transparente ESG dorado 80x195cm

Mampara puerta de ducha vidrio transparente ESG dorado 80x195cm

196,22 €
196,22 € 220,85 €
You save 11% (24,63 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¡Da una estética fresca a tu baño con esta moderna mampara de ducha con vidrio ESG! Material de primera calidad: La mampara de ducha tiene un vidrio de seguridad ESG de 5 mm de grosor y se apoya en una estructura de aluminio. Así, puedes estar seguro de que la estructura se mantiene fuerte una vez montada.Tamaño ajustable: El perfil ajustable y la barra de soporte flexible facilitan la adaptación a cualquier tamaño y disposición de baño.Fácil de limpiar: La mampara de ducha es fácil de limpiar. ¡Lo único que tienes que hacer es limpiar las molestas manchas de agua!

  • Color de la estructura: Dorado
  • Material: Vidrio ESG claro, aluminio, acero inoxidable
  • Dimensiones: (78 - 80) x 195 cm (ancho x alto)
  • Grosor del vidrio: 5 mm
  • Estructura de 2 cm ajustable en ancho
  • Barra de apoyo ajustable de 70 a 120 cm
  • Resistente a salpicaduras
  • Requiere montaje: Sí
    • La entrega contiene:
  • 1 x Mampara de ducha (4 cristales)
  • Barra de soporte flexible cuadrada
  • Perfil ajustable
  • Esquinas de seguridad
Se debe supervisar a los niños para asegurarse de que no jueguen con el aparato. Mantenga a los niños alejados del área de montaje. Precaución: Lea atentamente las instrucciones antes de usar y consérvelas para futuras consultas.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.