Skip to product information
  • Vetonek Máquina de chapas con cortador circular 58 mm

58 mm circular cutter machine

149,22 €
149,22 € 167,94 €
You save 11% (18,72 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Transforms your favorite images and slogans into badges with this maker. These plates can produce different types of pin sheets, ribbons, keys, mirror keys, etc. This plates machine comes with a trocage game that adjusts to make 58 mm flagship sheets. The "positive limit" design ensures the alignment of the upper and lower die. The sliding base is designed for faster and more precise operation of the slider. The textured handle is easy to use and only requires some strength to make a sheet, which makes the machine very easy to use. In addition, the delivery includes the circular cutter so you can adjust the cut diameter according to the specific needs.

  • Red
  • Material: steel, acrylic, rubber, plastic.
  • Total dimensions: 29 x 16 x 50 cm (length x width x high)
  • Mango dimensions: 3 x 24.5 cm (diameter x long)
  • Mold dimensions: 58 mm
  • With soft handle
  • Easy to install and use
  • Requires assembly: Yes
  • Delivery includes:
  • 1 x Chapas Machine
  • 3 X Troqueles
  • 1 x circular cutter

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.