Skip to product information
  • Vetonek Mesa de bar con 2 sillas de barra negras

Mesa de bar con 2 sillas de barra negras

275,34 €
275,34 € 309,89 €
You save 11% (34,55 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este clásico juego de bar consta de 2 sillas de bar y una gran mesa de bar. La mesa de bar bien diseñada es perfecta para todas sus bebidas nocturnas románticas o el té de la tarde con amigos o familiares. La mesa de bar está hecha a mano con madera maciza. La parte superior de la mesa se puede limpiar fácilmente cuando sea necesario. Las patas de madera maciza proporcionan una estabilidad y equilibrio óptimos. Los taburetes de bar incluidos en negro cuentan con un diseño clásico que complementará cualquier ambiente hogareño moderno. El asiento y el respaldo de la silla están tapizados densamente para mayor comodidadSu pata de madera garantiza estabilidad, mientras tanto agrega un toque de elegancia a toda la pieza. La silla tiene un acabado de piel sintética, que es duradera y muy fácil de limpiar. Montaje fácil con manual incluido. La entrega incluye 1 mesa y 2 sillas.

  • Datos de la mesa:
  • Dimensiones: 55 x 55 x 107 cm
  • Grosor de la superficie: 15 mm
  • Patas de mesa: 4,5 x 4,5 cm
  • Color: Negro
  • Material del tablero: MDF
  • Material de las patas de la mesa: Madera de pino
  • SillaDatos de las sillas
  • Color del asiento: Negro
  • Color del marco: Negro
  • Dimensiones: 41 x 45 x 108 cm (largo x ancho x alto)
  • Altura del asiento: 75 cm
  • Altura del respaldo: aprox. 35 cm
  • Material de las patas: Madera
  • Cantidad: 2
  • Material: Algodón: 5%, Poliéster: 20%, PVC: 75%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.