Skip to product information
  • Vetonek Mueble de TV con luces LED gris hormigón 90x35x40 cm

Mueble de TV con luces LED gris hormigón 90x35x40 cm

72,88 €
72,88 € 82,02 €
You save 11% (9,14 €)
Tax included. Shipping calculated at checkout.

Description

Con un diseño moderno y práctico, este mueble para la TV con luces LED definitivamente se conviertirá en el centro de atención de tu habitación. La construcción resistente de este mueble de televisor lo hace muy duradero. Tiene un amplio espacio para que puedas guardar tu reproductor de DVD, tu videoconsola, tu dispositivo de streaming y tus soportes multimedia de forma ordenada. Este soporte para TV cuenta con luces LED RGB, que tienen diferentes menús para cambiar el color de las luces y permitir que el color se ajuste automáticamente de manera diferente. Las luces LED subrayan el aspecto moderno y contribuyen a la sensación de moda. Además, este set es fácil de limpiar con un paño húmedo. Nota:El producto tiene un conector USB, pero no se incluye la fuente de alimentación USB de 5 V certificada.

  • Color: Gris hormigón
  • Material: Madera contrachapada
  • Dimensiones: 90 x 35 x 40 cm (largo x ancho x alto)
  • Cuenta con luz LED RGB
  • Requiere montaje: Sí
No utilice este artículo si algún componente está roto, rasgado o falta. Este producto funciona con CC de 5 V, pero la fuente de alimentación USB certificada de 5 V no está incluida. El alto voltaje puede causar sobrecalentamiento y puede provocar daños al dispositivo y el riesgo potencial de sobrecalentamiento e incendio.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.