Skip to product information
  • Plisse Persiana plisada blanco 60x100 cm

Plissea Pisada White Plisse 60x100 cm

29,15 €
29,15 € 32,81 €
You save 11% (3,66 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This pleated blind is an ideal protection against the sun and sight. It can be adjusted from below and from above to meet your needs on different occasions and moments. The modern folds, similar to the waves that the marine breeze forms, represent a simple but wide vision for people, and are also an excellent decoration for your room. The pleated blind is mounted by fastening support, without drilling the wall, window or door, excellent for use in villa, living room, bedroom, bathroom, kitchen, dining room, office building, meeting room, guest room , etc. Available in many dimensions: 40 x 100, 50 x 100, 60 x 100, 70 x 100, 80 x 100, 90 x 100, 100 x 100, 110 x 100 40 x 125, 50 x 125, 60 x 125, 70 x 125, 80 x 125, 90 x 125, 100 x 125, 110 x 125 40 x 150, 50 x 150, 60 x 150, 70 x 150, 80 x 150, 90 x 150, 100 x 150, 110 x 15040 x 200 , 50 x 200, 60 x 200, 70 x 200, 80 x 200, 90 x 200, 100 x 200, 110 x 200 can find the one that best suits your design.

  • Material: Crepe fabric
  • Metal bar material from the upper and lower part: aluminum
  • Color: White
  • Width: 60 cm
  • Length: 100 cm
  • Assembly by fastening support
  • CARE: Brush and dry cloth
  • Material: Polyester: 100%
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.