Skip to product information
  • Vetonek Tienda de fiesta plegable Pop-Up con 3 paredes laterales taupe

Pop-up folding party shop with 3 Taupe side walls

185,42 €
185,42 € 208,69 €
You save 11% (23,27 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This folding tent for parties with side walls is ideal for a wide range of outdoor events, such as shows, weddings, parties, barbecues, festivals, etc. Durade material: The roof cover is made of Oxford cloth with a PVC coating, so it is the perfect option for wet or rainy conditions and is also easy to clean. Emerging and folding design: thanks to the emerging design, you can mount and Easily fold the store in seconds. And the dinner tent is folding to facilitate storage and transport. Practical design: the tent has 3 side walls with transparent windows, which offer a combination of open and closed designs to adapt to a multitude of guests without being crowded. Structure Stable: The steel structure with powder coating from the garden store guarantees its solidity and stability. Useful information: This product is not suitable for use in adverse weather conditions, such as strong winds, intense rain, snow, storm, etc.

  • Fabric color: taupe
  • Frame color: black
  • Structure material: powder coating steel
  • Ceiling material: oxford fabric (100% polyester) with PVC coating
  • Side wall material: Oxford fabric (100% polyester), PE (polyethylene)
  • Dimensions: 440 x 292 x 315 cm (length x width x high)
  • Eavel height from the ground: 238 cm
  • It has 3 side walls with transparent windows
  • 8 Earth stakes and 4 strings included
  • Requires assembly: Yes
The product is not suitable for climatic conditions such as strong winds, snowfall and extreme climatic conditions.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.