Skip to product information
  • SCHÜTTE Grifo monomando mezclador de ducha CORNWALL cromado

Schütte tap monomand shower mixer Cornwall chrome

390,53 €
390,53 € 439,53 €
You save 11% (49,00 €)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The monomand for bathing for bathroom/premium shower and easy to use Cornwall with Schütte shower game is the perfect choice for independent showers. The mixing tap has a low -noise replaceable cartridge. Thank you to its chrome surface, this game has a reflective shine. In addition, the construction of solid brass makes it very durable. The tap and the shower set are easy to install and clean.

  • Color: Chromed
  • Material: brass
  • Finish: Chrome
  • Dimensions: 19.5 x 19.5 x 100.2 cm (length x width x high)
  • Ceramic discs
  • 40 mm loud replaceable cartridge
  • With shower set
  • 1/2 "(approx. 1.9 cm) shower flexo connection
  • Metal side handle
Security notes. Let the installation work only make experts. . Caution damage caused by water! Before installation, close the general water supply. . Make sure all meetings fit correctly. . These taps are not suitable for use in low pressure electrical heaters and small accumulators. . We recommend the installation of a filter in the device or at least the use of angular valves with filter, to avoid the entry of foreign bodies that could damage the cartridge. . This tap is destined exclusively for use in private homes. Only suitable for use in rooms with a temperature greater than 0 ° C. In case of frost danger, close the water supply and empty the tap. . If the tap is not used for a prolonged period, we recommend initially passing a greater amount of water before extracting drinking water. · Be careful when adjusting hot water. Danger of burns! . Incorrectly installed accessories can cause water damage

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.