Self -adhesive mat 30 units Blue 65x22.5x3.5 cm
Description
These stairs carpets will not only be a striking decorative complement for the decoration of your home, but will also protect you from the slippery when you upload and lower the stairs and prevent them from being scant. First quality material: These stairs carpets are made of strong needle felt fabric, which makes them sound shock absorbers, non -slip and comfortable. Noise reduction: the staircase steak not only improves the aesthetic attraction of the stairs, It also reduces noise. Enjoy a quieter, soft and safe experience when you climb and lower stairs with the stairs carpet. Non -slip design: thanks to its lower non -slip part, this step remains safe in its place on the ground, avoiding any unwanted sliding. Fácil de Clean: The staircase mat can be washed by machine, which facilitates cleaning and maintenance. Useful information: The staircase is delivered enrolled to facilitate its transport. Wait for a while until the product is completely straight and flat.
- Color: blue
- Material: Needle felt fabric (95%PES, 5%pp)
- Dimensions: 65 x 22.5 x 3.5 cm (length x width x high)
- Hair height: 3.5 mm
- Hair weight: 1050 g/m²
- Backup precap with glued strips
- Delivery contains:
- 30 x stairs carpets
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.