Skip to product information
  • Vetonek Set de muebles de jardín 11 pzas cojines ratán sintético negro

Set de muebles de jardín 11 pzas cojines ratán sintético negro

1.192,85 €
1.192,85 € 1.342,53 €
You save 11% (149,68 €)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Crea la zona de estar atractiva y relajante con la que siempre has soñado con este juego de sofás para jardín. ¡Puedes disfrutar de una relajante tarde soleada o de una noche veraniega con tu familia y amigos en este juego de muebles modular! Construido a partir de duradero ratán PE tejido a mano sobre una estructura de acero con recubrimiento en polvo, este conjunto es fuerte, resistente a la intemperie y adecuado para usar a diario. Los cojines acolchados y gruesos y los asientos modernos extraprofundos harán que puedas relajarte. Las fundas de los cojines, con cremallera, son extraíbles para facilitar el lavado. La superficie de la mesa de centro incluye un cristal templado endurecido para dar un toque de estilo y facilitar la limpieza. Además, gracias a su diseño ligero y modular, puedes mover este conjunto por tu casa con gran facilidad. Nota: Se recomienda cubrir el set en caso de lluvia, nieve y heladas.

  • Color: Negro
  • Color cojín: Negro
  • Material: Acero con recubrimiento en polvo, ratán PE
  • Material del cojín: Poliéster
  • Dimensiones de la mesa de centro: 50 x 60 x 33 cm (ancho x profundo x alto)
  • Dimensiones del sofá central: 68 x 72 x 63 cm (ancho x profundo x alto)
  • Dimensiones del sofá esquinero: 72 x 72 x 63 cm (ancho x profundo x alto)
  • Grosor del cojín: 6 cm
  • Grosor de almohadas: 15 cm
  • La entrega incluye:
  • 2 x Mesas de centro con superficie de cristal templado
  • 5 x Sofá de esquina
  • 4 x Sofás centrales
  • 9 x Cojines de asiento
  • 12 x Almohadones de respaldo

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.